NightWatcher NW950 Outdoor Motion Sensing and Rotating Robotic LED Light Head Installation Guide
- June 5, 2024
- NightWatcher
Table of Contents
NightWatcher NW950 Outdoor Motion Sensing and Rotating Robotic LED Light
Head
PRODUCT OVERVIEW
INSTALLATION
-
Switch off the power before installing the fixture
-
Select installation area and install between 6.6 ft/ 2 meters – 10 ft/ 3 meters above the ground
-
Feed the fixture black and white wires through the Universal mounting bracket and through the EVA gasket before connecting inside the junction box.
-
Use the Wire Nuts and connect the wires inside the junction box :
- Black to Black (Live)
- White to White (Neutral)
-
Align the light fixture with the base cover and ensure the back plate seal is in place before tightening the Light fixture to the base cover using the base cover screws and cover the screw heads with the decorative screw covers
-
Installation Summary
The installation process involves the following steps;
-
After installation, power-up and switch the power on to the Night Watcher.
-
Scan the QR code appropriate to your phone to download the free ”Tuya Smart “App to an iOS or Android device.
-
The Night Watcher’s unique ID is permanently connected to the Wi-Fi.
-
Once the Night Watcher is successfully connected, an acceptance sound will be heard when connected. NB: If the connection is not successful, you can reset the Night Watcher;
* Open the SD card cover anpush the reset button in for 3 seconds an sound will indicate the reset has been successful and then repeat the Wi-Fi pairing process below.
* Tuya Smart(with Tuya logo): QR code for downloading-
Connecting the NW950 to your Phone or Tablet
Firstly ensure your phone or tablet is connected to the Wi-Fi network you intend to use for the Night Watcher NW950. -
Open the Tuya Smart App
-
First time in, select “Sign Up” to create your unique account, then select “Log In”
-
Input your account number and password, then select “Log In “.
-
App Installation Continue
-
Add and connect your NW950 to the Wi-Fi network following these 3 steps
-
Click on Add Device 2) Click on Security·& Video Surveillance 3) Click on Smart Camera (Wi-Fi)
-
Next your phone will generate a QR code which is pointed at the Night Watcher camera lens to connect to the Wi-Fi network. When ready press “Next”.
-
NB: If the connection or pairing process is not successful, you can reset the Night Watcher;
Open the SD memory card cover that is located at the bottom of lamp head and push the reset button in for 3 seconds and a notification sound will indicate the reset has been successful, and then repeat the Wi-Fi pairing process below .
Note: memory card not included -
When the Night Watcher is successfully connected to the Wi-Fi network, the camera images from the installed Night Watcher can be viewed.
-
Connecting the NW950 to your Phone or Tablet****
FCC Caution
The user is cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.
IC Statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>