TIC B503 8-Inch Outdoor Bluetooth 5.0 In-Ground Omnidirectional Speaker Instruction Manual
- June 5, 2024
- TIC
Table of Contents
B503
Outdoor Omnidirectional
In-Ground/Surface-Mount
Bluetooth 5 Speaker
Instruction Manual
Speaker Layout
① Bluetooth Button (BT)
② Transmitter Mode Button (TX)
③ Receiver Mode Button (RX)
④ Power Button
⑤ IR Remote Receiver Node
Ⓐ Bluetooth Indicator LED (Blue)
Remote Control
① Power Button
② Bluetooth Button
③ Channel Button (press to switch between stereo, left channel, and right
channel)
④ Play/ Pause
⑤ Previous Track
Ⓐ Next Track
⑦ Decrease Volume
⑧ Increase Volume
⑨ Transmitter Mode
⑩ Receiver Mode Reset Button
In the following instructional sections, when instructed to press a specific
button, you can either aim the remote at the speaker and press the button or
press the respective button on the device itself if it is available. Not every
button is available on the actual speaker. Please note the position of the IR
receiving node on the speaker when aiming the remote. The performance of the
remote may degrade if the remote is not aiming directly at the node or if
strong sunlight is interfering with the signal. The typical range of the
remote is 30 feet.
You may need to move closer if the signal is not receiving properly.
A single remote can control any compatible TIC speaker/device. Aim remote
carefully if multiple speakers are placed in close proximity. Volume can be
individually customized for each speaker via the remote. When the volume is
adjusted on the connected Bluetooth device or music/video application, it will
be applied to all speakers.
During broadcast mode, track control will only work when aiming at the main
device. You can alternatively control the track directly on your Bluetooth
device or music/video application.
Bluetooth Device Pairing
- Upon initially powering up, you should hear an opening tone. The blue LED light will be flashing slowly, indicating it is in standby mode. If the blue LED is solid, a Bluetooth device is already connected.
- To pair a Bluetooth device (smartphone, tablet, computer, transmitter, etc.), double-click the Bluetooth (BT) button. You should hear the voice prompt “pairing”. The speaker is now in discovery mode.
- In the Bluetooth setting menu of your Bluetooth device, search for TIC BT Speaker and connect. When you hear the voice prompt “connected”, the pairing process is completed. The blue LED is now solid.
- To disconnect a connected Bluetooth device, double-click the Bluetooth button. The blue LED will be flashing again. You can then switch to another previously paired Bluetooth device by repeating step 3 on that device’s Bluetooth setting menu. To connect to a new Bluetooth device, repeat steps 2 & 3.
- If you want a full reset and delete all previous Bluetooth pairings, double-click the Reset button.
Note: The speaker can remember multiple Bluetooth devices. Speaker will automatically reconnect to the most nearby paired device within range each time you turn it on. The connection range is up to 300 feet (outdoor with a clear line of sight) for Bluetooth 5.0 devices. The speaker is backward compatible with devices with older Bluetooth specifications. However, the range will be limited to the range of the older specification (such as 20-50 feet for 4.0 devices).
Multi-Speaker Broadcast Mode
With broadcast mode, you can connect up to 100 compatible TIC Bluetooth 5 speakers/devices together to create a no-hassle multi-speaker sound system. In broadcast mode, one speaker will serve as the main transmitting device and all other speakers will serve as secondary receiving devices. The broadcast range is up to 300 feet in an outdoor setting with a clear line of sight. To optimize broadcast range in your multi-speaker sound system, we suggest choosing the most centralized speaker as the main transmitter device. In addition, elevating any device a few feet off ground level can maximize the broadcast transmitting/receiving range.
To set up broadcast mode
-
Select the appropriate speaker as the main speaker. While not required, we recommend pairing the Bluetooth device first before setting up the broadcast mode. Press the Transmitter Mode (TX) button. You should hear the voice prompt Transmitter Mode.
-
On a secondary speaker, press the Receiver Mode (RX) button. You should hear the voice prompt “Receiver Mode”.
If a speaker is already connected to a Bluetooth device (as indicated by a solid blue light), you will need to disconnect it first or the broadcast connection would not work in step 3. -
Within 30 seconds, double-click the TX button on the main unit and double-click the RX button on the secondary unit. You should hear the voice prompt “searching” from both units. You will hear the voice prompt “connected” once the connection is completed.
-
If the connection is not made within 30 seconds, you may repeat steps 1-3.
-
To add any additional secondary speaker, repeat steps 2 and 3. Up to 100 devices can be added together.
To exit broadcast mode
Press the Reset (or Bluetooth) button once to exit broadcast mode. If pressed
on the main unit, it will stop the main speaker from broadcasting to all
secondary speakers. If pressed on a secondary speaker, this specific secondary
speaker will stop receiving and be allowed to connect to and play from a
separately paired Bluetooth device.
To restart/rejoin broadcast mode
For the main unit, press the TX button to restart broadcast mode. You should
hear the voice prompt “transmitter mode”. The broadcast mode will then resume
shortly for all speakers (assuming secondary speakers are still in receiver
mode). For any secondary unit, first, disconnect any connected Bluetooth
device by double-clicking the Bluetooth (BT) button. Press the RX button to
resume receiving from the previously connected main speaker. You should hear
the voice prompt “receiver mode” and broadcast mode will resume shortly.
To switch the main speaker
Exit the broadcast model for each speaker and redo the broadcast mode setup
instructed on the previous page. Please remember to disconnect the Bluetooth
device from the original main speaker before switching it to receiver mode.
Troubleshooting
Issue|
Suggestion
---|---
No sound is heard.| 1) Check power connection. If there is no flashing or
solid blue LED, the speaker is not turned on.
2) Make sure the correct Bluetooth device is connected. If needed, double-
click the BT button to disconnect and then reconnect from the Bluetooth
device.
3) Increase volume level using the remote.
4) Check the volume level on the Bluetooth device and make sure no mute
function is activated.
5) If no sound is heard from all previously connected secondary speakers,
reactivate Transmitter Mode by pressing the TX button once on the main unit.
6) If no sound is heard from a specific previously connected secondary
speaker, reactivate Receiver Mode by pressing the RX button once on the
impacted unit.
Sound/connection is intermittent.| 1) Keep Bluetooth devices (smartphones,
tablets, etc.) at a stationary location. Signals can easily become unstable if
the Bluetooth device is moving (I.E: inside a pocket while walking).
2) Move the Bluetooth device closer to the main unit.
3) Disconnect and reconnect the Bluetooth device.
4) Move away from (or remove) any nearby electronic device that may present
signal interference (I.E: router, microwave, TV, etc.)
5) You may improve signal connection by slightly elevating the speaker.
6) If intermittent sound only impacts a specific secondary speaker, move that
speaker closer to the main unit.
Speaker not responding to the remote.| 1) Check the remote battery.
2) Find IR node on speaker and aim remote directly.
3) Move the remote closer to the speaker before aiming.
4) Provide shielding if direct sunlight is hitting on the path of the infrared
signal.
Cannot set up broadcast mode| 1) Make sure no Bluetooth device is connected
except to the main unit. You can disconnect any connected device by double-
clicking the BT button on any secondary speaker.
2) First activate the respective broadcast mode by pressing the TX/RX button
only once before double-clicking the TX/RX button to initiate the broadcast
connection.
3) Move the secondary speaker closer to the main unit during setup.
4) Make sure to initiate the connection set up within the 30-seconds window.
Ask a second person to help press the TX/RX buttons simultaneously.
Remote is lost| 1) Use another remote if you have purchased multiple TIC
Bluetooth 5 speakers/devices.
2) Replacement remotes can be purchased on our website.
Installation/ Maintenance Note
- The B series speaker can be installed in-ground or surface-mounted. In-ground installation is generally optimal since burying the speaker in-ground will enhance its resonance, providing a fuller audio experience. When mounted on a surface, please ensure the wiring is safely secured and does not become a tripping hazard. The optimal burial depth is 1-inch exposure from ground level for the bottom section.
- System should be fully tested above the surface before speakers and wires are buried.
- To clean the speaker, you can rinse with fresh water from directly above the speaker and wipe with a cloth. If needed use mild detergent to remove dirt.
Caution
Risk of Electric Shock. Do Not Open.
The lightning flash with an arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note 1:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note 2:
1. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
2. This equipment should be installed and operated with a minimum distance of
20 come between the device and your body.
Sound Warning
Avoid hearing damage by establishing safe listening volumes. Listening to this
product at high volumes or for extended time periods may cause permanent
hearing loss. Protect your hearing by establishing safe volumes. Start with
the volume setting control at its lowest setting. Slowly increase the volume
until you can hear it comfortably and clearly without distortion. Reduce the
volume or stop listening if you experience ringing in your ears or any
discomfort. Consult with a physician if needed.
Warranty
TIC offers a limited one-year full parts and labor warranty for all of our new
products.
Please visit TIC’s warranty page (http://www.ticcorp.com/warranty/) for
detail on our latest warranty policy
Licensing, Copyright & Misc. Notice
The Bluetooth word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by TIC is under license. Other
trademarks and trade names are those of their respective owners.
TIC Audio Inc. All rights reserved. The TIC logo is a trademark of TIC Audio
Inc, registered in the United States. Features, specifications, and appearance
are subject to change without notice.
If you have any further questions/issue, please visit our support help desk at
www.ticcorp.com/support. You can easily log
a ticket online. Our helpful associate will typically respond within one
business day, if not on the same day.
Documents / Resources
| TIC
B503 8-Inch Outdoor Bluetooth 5.0 In-Ground Omnidirectional
Speaker
[pdf] Instruction Manual
B503, 8-Inch Outdoor Bluetooth 5.0 In-Ground Omnidirectional Speaker, B503
8-Inch Outdoor Bluetooth 5.0 In-Ground Omnidirectional Speaker
---|---