Jm Manufacturing JMS039-27-1 Radio Control Viper Mist Racer Instruction Manual

Jm Manufacturing JMS039-27-1 Radio Control Viper Mist Racer

Introduction

Thank you for purchasing the Viper Mist Racer. Before playing the Viper Mist Racer, please read the instruction manual carefully and keep it for reference. This product is suitable for children of 8 years old or above. Controller: Requires 2 (Two) 1.5V AA size Alkaline batteries(not included) Viper Mist Racer: Powered by a rechargeable and non-replaceable 3.7V Lithium battery (included) Caution: This Product is only used in the 3.7V output device plug!

Batteries Installation

For Viper Mist Racer

1. Remove the screw and open the battery cover.
2. Install the Rechargeable 3.7V Lithium battery.
3. Put the screw back to lock the battery cover.

For Controller

1. Remove the screw and open the battery cover
2. Install two 1.5V AA size Alkaline batteries
3. Put the screw back to lock the battery cover

Functional Description of the Controller and Viper Mist Racer

Instructions

• Install the 3.7V lithium battery on the bottom of viper mist racer and switch on before playing the vehicle.
• Install two 1.5V AA size Alkaline batteries on the controller before starting to control the vehicle.
• Remove the batteries on both of the viper mist racer and controller after use.
• Control distance: around 65ft.
• Play time: around 30 minutes if the battery is full in charge
•  Charging time: around 2-3 hours
• Set includes: Viper Mist Racer x1, Controller x1, 3.7V Rechargeable Lithium battery x1, USB cable x1, Plastic Bottle x1, Screw Driver x1, Instruction manual x1.
• This product is controlled by 2.4GHz channel.

IMPORTANT SAFEGUARDS

• Adult supervision required when you play the vehicle or charge the rechargeable lithium battery.
• Please take out the battery of the controller and the vehicle if you do not use the product for a long time.
• Disconnect the rechargeable battery and the plug from the vehicle before charging.
• Connect the rechargeable battery with the USB cable and plug the USB port into the corresponding socket.
• This product can be only charged by charging-only USB cable (Included).
• Adapters over 5V such as quick chargers are not allowed.
• Do not use another non-replaceable and rechargeable battery which is not provided by the set.
• Do not play the vehicle in the water or damp environment.
• Safe disposal of batteries. Do not throw batteries in the fhre because the battery will leak and cause an explosion.

FCC STATMENT

This device complies with Part 15 of FCC Rules. Operation is5 Subject to the rollowing Two conditions: (2) This device must accept any interference recelved, including interference that may cause undesired operation.

Warning : Changes or modifications to this unit not expressly approved by the party responsible for the compliance could void the users authority to operate the equipment present generdles, uses dnd can delete radio frequency energy DNA, not unstudied dnd used in accordance Win the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the recelving antenna.
• Increase the separation between the equipment the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Warning statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>