MARQUANT 000346 Bluetooth Speaker Instruction Manual

June 5, 2024
MARQUANT

MARQUANT 000346 Bluetooth Speaker

000346

BLUETOOTH SPEAKER

OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)

Care for the environment!
Recycle discarded products in accordance with local regulations
Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

SAFETY INSTRUCTION

Read the operating instructions carefully before use.
Save them for future reference.

  • This appliance can be used by children from eight years and upwards and by persons with physical, sensorial, or mental disabilities, or persons who lack experience or knowledge if they are supervised or receive instructions concerning the safe use of the appliance and understanding the risks involved with its use.

  • Cleaning and maintenance must not be carried out by children unless they are more than eight years old, and are kept under supervision.

  • Do not subject the product to knocks and blows

  • The product is waterproof and dustproof when it is connected via Bluetooth.
    The IP67 rating does not apply if a 3.5 mm connection is used.

  • The product can be damaged in very hot, or very cold conditions.

  • Do not block the speaker.

  • Any repairs must be carried out by an authorized service center. Never try to open or dismantle the product.

  • Recycle discarded products in accordance with local regulations.

  • Never modify the product in any way. The manufacturer cannot accept liability for any damage caused by unauthorized modifications

TECHNICAL DATA

Charging voltage 5 V DC
Battery Li-Ion 2000 mAh
Output 6W
Signal/noise ratio > 65 dB
Impedance 4O
Frequency range 120 Hz -16 kHz
Distortion < 0.5%
Connection Bluetooth 4.0/AUX
Battery life Approx. 8 h
Charging time Approx. 3 h
Protection rating IP67
Dimensions 194x80x34mm
Weight 330g

 DESCRIPTION

MARQUANT 000346 Bluetooth Speaker - DESCRIPTION

  1. Power switch. Put the power switch in the ON position for 2-3 seconds to start the product.
    Put the power switch in the OFF position for 2-3 seconds to start the product.

  2. Previous track: Tap to go to the previous track.

  3. Next track: Tap to go to the next track.

  4. Lower volume: Tap to lower the volume.

  5. Increase volume: Tap to increase the volume.

  6. Button for pause/answer/recall: During playback, tap the button once to start or pause. Press and hold to end pairing with the product. For an incoming call press the button to answer. Playback resumes when the call is ended.

  7. RESET: Tap the button to reset the product.

  8. Micro USB port.

  9. 3.5 mm audio input.

USE

Package contents
1 Bluetooth speaker
1 USB cable
1 3.5 mm audio cable
1 copy of operating instructions
Status lamps
Charging: Red light on.
Fully charged: Red lamp off.
Pairing mode: Blue light flashes rapidly.
Connected: Blue lamp on.
Playback: Blue lamp flashes slowly.
Charging the battery
Charge the battery for at least 24 hours before using it for the first time.

  1. Connect the micro USB cable to the charging port on the speaker.
  2. Connect the other end of the cable to a USB port on a computer or to a compatible network adapter.
  3. The red status lamp goes on to show that the battery is charging.
  4. The red status lamp goes off when the battery is fully charged.
  5. When the battery becomes discharged it will now take about 3 hours to fully charge it.

Pairing

  1. Place the speaker within range of the Bluetooth unit.
  2. Put the power switch in the ON position. The blue status lamp flashes slowly 3 times and then flashes rapidly to indicate pairing mode.
  3. Follow the instructions on the Bluetooth unit to search for the speaker.
  4. The speaker designation during pairing is “000346”. If asked for a PIN code, enter 0000.
  5. The blue status lamp flashes slowly when the pairing is completed.

Use

  1. Put the power switch in the ON position for 2-3 seconds to start the speaker.
  2. An audio prompt is given and the blue status lamp flashes slowly.
  3. The blue status lamp goes on during playback.
  4. Put the power switch in the OFF position for 2-3 seconds to switch off the speaker.

TROUBLESHOOTING

Problem Action
Bluetooth pairing failed several times. Switch off and switch on the speaker.

If the unit asks for a password, enter 0000.
The playback falters.| Check if there is too big a gap between the units, or if there is an obstruction in between.
No sound during playback.| Check the volume setting on the speaker.
Check if the sound is switched off, or playback is paused.
No sound in AUX mode.| Check that the audio cable is correctly connected.
The product will not start.| Check if the battery is discharged.

DECLARATION OF CONFORMITY
Item number: 000346

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer.

BLUETOOTH-SPEAKER: XS IP67 6W RMS
Conforms to the following directives, regulations, and standards:

Directive/Regulation Harmonized standard
RTTE 1999/5/EU EN 300 328 V1.9.1, EN 301489-1 V1.9.2, EN 301 489-17 V2.2.1,

EN 62479:2010, EN 60950-1 :2006+A 11 +A 1 +A 12+A2
RoHS 2011/65/EU| IEC 62321-1:2013

This product was CE marked in a year: -16
Skara 2016-07-07

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals