tp-link C400HP VIGI Wi-Fi Network Camera User Guide

tp-link C400HP VIGI Wi-Fi Network Camera

Mount Your Camera

(Optional) Installing Waterproof Cable Attachments

• Make sure each part is securely attached and the waterproofing rings are flush to keep out water.

(Optional) Installing Waterproof Seal for Power Connectors

Install the waterproof seal for the power connectors when the camera is installed outdoors.

Mount your camera according to the diagrams in the opening chapter of this guide.

Set Up Camera

Here is a typical network topology. The camera works with an NVR for easier batch access and management.

• Get the TP-Link VIGI App from the Apple App Store or Google Play

• Connect your camera to the power source with the provided power adapter.

• Set up the camera.

  • Open the TP-Link VIGI app and log in with your TP-Link ID. If you don’t have an account, sign up first.
  • Tap the + button on the top right and follow the app instructions to activate and add your cameras.
    Note: If you want to use the NVR for easier batch access and management later, add the camera to the same network as the NVR

Done! You can now remotely view live video, manage cameras, and get instant alerts.

More Management Methods

You can also access and manage your cameras via any of the methods below

Use the camera with your VIGI NVR

Remotely view live video, manage cameras, and get instant alerts. Before you start, make sure the NVR is working properly.

1. Go to the NVR management page, Right click on the Live View screen and click Add Camera.
2. Select your camera and click + to add your camera directly. If you have disabled Plug and Play on your NVR, create a password or use a preset password for your camera.

Note: If you are using your cameras with other NVR brands, refer to the NVR’s User Manual to add cameras.

Via the VIGI Security Manager (Windows only)

View live video and modify camera settings on your computer.

1. Download the VIGI Security Manager on your computer at https://www.tp-link.com/ download-center/
2. Install the VIGI Security Manager and open it.
3. Cameras on the same network as your computer can be automatically discovered. Go to Settings > Discovered Devices, click + Add to activate your discovered cameras by setting passwords, and follow the instructions to add your cameras.

References

• WiFi Networking Equipment for Home & Business | TP-Link
• Support | TP-Link
• Support | TP-Link
• Support | TP-Link
• Support | TP-Link
• Support | TP-Link
• Support | TP-Link
• Support | TP-Link
• Support | TP-Link
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>