U-LOVE LIFE Me-300S Bone Conduction Headphones User Manual
- June 5, 2024
- U-LOVE LIFE
Table of Contents
U-LOVE LIFE Me-300S Bone Conduction Headphones
Please read the user manual carefully and follow the guidelines in this manual to assemble or operate; the product may upgrade without notice.
ON/OFF
- Power/Volume+ Button
- Volume- Button
Check power
Click the Volume +/- Button while idle state
Turn on the headphones
Press and hold the Power/Volume + Button for about 2 seconds until the blue
light flashes
Bluetooth connection
- Keep pressing the Volume + button for about 2 seconds in the off state until the blue light flashes, the headphones turn on and enter the pairing state.
- Open the bluetooth setting function of the device, select “Me-300S”, the blue light will turn off after bluetooth connected.
Function Button
- Function Button
- Play/Pause music Click once
- Answer call Click once
- End call Click once
- Reject call Press and hold for 1 sec
- Previous song Triple-click while music is playing
- Next song Double-click while music is playing
Ear-hook
- Ear-hook helps users with small head size to fasten the headphones.
- Wearing: attach the ear-hook to the headphone bracket while the long cure on the ear-hook attach the back of the ear. Then move the ear-hook forward or backward until it fits properly.
Wearing
Expanded state
Optimal Placement
Product Troubleshooting
- Hold and pressing the Volume + button for about 2 seconds to turn on or off, without any voice prompt or light: the headphones may be out of battery, need to charge.
- If the headphone still can not be turned on after charge, it may be the electronic circuit failure, please contact the after-sale service.
- The headphones automatically connects to a previously connected terminal device (within valid distance) when it is turned on, making it impossible to connect to the new device. Treatment: Delete the headphones bluetooth name from the bluetooth list of the connected terminal device, and then try to connect again.
- If the headphones bluetooth can never be found by the new terminal device, try to delete all the names in the bluetooth list of this terminal device, and then perform the pairing operation.
- If the headphones are still unable to match the device after power on, it may be the electronic circuit failure, please contact the after-sale service.
- Check if the socket is ready.
- Check if the charger is ready.
- Check if the red light is on, it means that it is not charging. If the blue light is always on, it is fully charged.
- If the headphones still can not be charged, it may be the electronic circuit failure, please contact the after-sale service.
Product Packing List
- Headphones × 1 PCS
- Pouch × 1 PCS
- Charging cable 0.5m × 1 PCS
- User Manual × 1 PCS
- Ear-hook × 2 PCS
Product parameters
- Bluetooth connection distance：Greater than 10 meters (without barriers)
- Protocols：Support and compatible with Bluetooth (Bluetooth), A2DP, HSP, HFP and other protocols
- Loudspeakers：Bone conduction technology speaker, impedance 8 Ω
- Battery：Rechargeable lithium battery, capacity 150mAh
- Charging：USB Type-C connector, USB standard charger
- Environment：Temperature: -10℃~50℃, Humidity: 0~90%
- Time parameters：About 6 hours of continuous music playback (depends on volume and audio source); about 8 hours of continuous calling; 90 minutes to complete charging
Attention
- Do not disassemble the headphones, the electronic circuit and battery may cause harm to human body.
- Do not burn the headphones, otherwise it may cause an explosion.
- Do not throw the end-of-life headphones into the water, otherwise it will pollute the water and cause serious impact on the environment.
- electronic circuit boards and batteries of end-of-life headphones must be submitted to the relevant recycling qualified institutions for processing, and must not be discarded at will.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions This device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause undesired operation.Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>