DECKED 9989 Battle Mat Installation Guide

DECKED 9989 Battle Mat

TOOLS NEEDED

• UTILITY KNIFE
• STRAIGHT EDGE

NOTE:
NO FASTENERS NEEDED. THE 1.25″ SCREWS INCLUDED ARE TO BE USED FOR INSTALLING CORE TRAX ON TOP OF THE BED MAT. SAVE THESE FOR FUTURE USE.

INSTALLATION

STEP 1: CONFIRM BED LENGTH

• If you have a 6’4″ – 6’9″ bed, there is no need to trim the Battle Mat.
• Simply place the mat on top of your DECKED drawer system, center it, and keep on truckin’.

THESE MIGHT BE USEFUL:
Watch installation videos at www.DECKED.com/video

STEP 2:  TRIM BED MAT FOR SHORT BEDS

• The Bed Mat will need to be trimmed for 5’5″ – 5’9″ beds.
• Locate the recessed cutting lines marked on the tailgate end of the Battle Mat.
• Use a SHARP utility knife.
• Don’t be a hero – use at least three gentle but firm passes to cut through the Battle Mat – see detail in red below.
• No waste! You can use the trimmed-off piece as a drawer liner. 

References

• DECKED Truck Bed Storage, Tool Boxes & Truck Accessories
• Truck Bed Storage and Organizer Videos from Decked

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>