LENRUE F21 Portable Wireless Outdoor Speaker User Manual
- June 5, 2024
- LENRUE
Table of Contents
LENRUE F21 Portable Wireless Outdoor Speaker Packing List
Specification
- Version
- 5.0
- Play Time
- 3-24H
- Battery Capacity
- 2000mAh
- Charging Time
- 3-4H
- Input
- DC-5V/1A
- Wireless Range
- 33ft
Wireless Connection
- Turn on the F21 Speaker
- Pair the speaker with your devices
Diagram
Buttons
| Button | Function | Detailed Operation |
|---|---|---|
| Turn on / Switch Play Mode TWS Connection/ Disconnect | Long press Short |
press Double Click
| Disconnection Devices Play/Pause Music Call Back| Long press Short press
Double Click
| Volume up Next track| Short press Long press
| Volume down Previous track| Short press Long press
| RGB Light on/off
Change Light Mode| Long press Short press
- Plug the USB-C charging cable on your speaker, the battery indicator glows red
- When fully charged, the indicator goes out.
TWS Wireless Pairing
- Turn on two F21 speakers.
- Disconnect all devices with F21 speakers.
- Double click the power button on the one of speaker into TWS pairing mode
- TWS pairng will be finished after prompt.
- Click the device name “F21” to pair on.(Refer to page 2 “Wireless connection”)
Alexa Connection
- Disconnect wireless speaker with all devices.
- Put your wireless device in pairing mode.
- Open the Alexa app, click the “Settings”.
- Click Echo Dot device name.
- Click the “Wireless”
- Click the speaker name “F21” to pair thewireless speaker with Alexa.
Warm Note
Thank you for choosing us!
Every order will enjoy following after-sale policy: We hope you are satisfied
with our products, more questions and problems, feel free contact us for help.
Each of your suggestions and ideas is very important to us. Welcome to share
design suggestions to our via your order of shopping plat. and become an
important promoter of our brand.
- 30 Days refund,
- 180 Days worry-free warranty,
- Lifetime technical support.
Use Tips
- Full charge for first use
- Disconnect all device for Alexa Pairing
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.