UNI-T LM320A Digital Angle Meter User Manual
- June 5, 2024
- UNI-T
Table of Contents
LIV1320A/LIVI32013
Digital Angle Meter User Manual
Product Description
| 1 | Battery status |
|---|---|
| 2 | REF relative zero |
| 3 | Product tilt direction |
| 4 | Laser |
| 5 | Unit conversion (in/ft: aim/al) |
| 6 | ABS horizontal zero |
| 7 | Gradient unit (%r) |
| 8 | Data hold |
| 9 | Measurement result |
| 10 | Power/laser button |
| 11 | REF/ABS/calibration button |
| 12 | Data hold/unit conversion button |
| 13 | Type-C charging interface |
| 14 | Laser emission aperture (LM320B) |
Operation
Power on
When the meter is not turned on, short press to power
Power off: When the meter is turned on, long press to power off.
Laser (LM320B only)
After turning on the meter, short press to step through: turn on the left-side
laser> turn on the right-side laser >turn on the lasers on both sides> turn
off the lasers on both sides. 
Angle measurement:
When the meter is turned on, place it on an inclined surface. The value
displayed on the screen is the angle between the inclined surface and the
horizontal plane. REF (relative value mode):
Short press to enter the relative value mode (set the current measurement
value to Short press again to exit this mode.
Calibration:
Place the product upright on a flat, smooth surface as shown in Figure 1. Long
press, “1” will show on the screen (Figure 2). Short press to proceed to the
next step (Figure 3). Rotate the product 180° in the same position (Figure 4).
Short press to complete the calibration.
Data hold:
Short press to freeze the current measurement data.
Short press again to exit this function.
Unit conversion:
Long press to convert the unit (default unit: °). Other selectable units:
mm/m, %, in/ft. Charging:
When the low battery indicator shows on the upper right corner of the screen,
please use the attached charging cable to charge the product.
Specifications
| Model | LM320A | I LM320B |
|---|---|---|
| Measurement range | 4’90° | |
| Accuracy | ± (0.2°) | |
| Resolution | 0.01° | |
| Laser | / | I Two-side lasers |
| Operating temperature | 0-50°C | |
| Display | EBIT, with backlight | |
| Battery | 3.7V 300mAh lithium battery | |
| Charging interface | USB Type C | |
| Battery life | 2h | |
| Magnet base | Two-side magnets | I Four-side magnets |
| Frame material | Aluminum alloy | |
| Relative/absolute measurement | ✓ | |
| Angle lock | ✓ | |
| Low battery indication | ✓ | |
| Auto power off | 5 minutes | |
| Product size | 61’61’31 mm | |
| Standard accessories | Angle meter: 1pc, USB cable: 1pc, user manual: 1pc, base |
plate: 1pc
Cautions
- Please do not use organic solvents to clean this product.
- Please use a soft cloth to clean the dirt to avoid damaging the surface of the product.
- The meter will power off automatically if no button press occurs for 5 minutes.
UNI-TREND TECHNOLOGY (CHINA) CO., LTD.
No.6, Gong Ye Bei 1st Road,
Songshan Lake National High-Tech Industrial
Development Zone, Dongguan City,
Guangdong Province, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>