Sony MDR-NC6 Noise Canceling Headphones-Complete Features/Instruction Guide

Sony MDR-NC6 Noise Canceling Headphones

Specification

• BRAND: Sony
• COLOR: Silver
• MODEL NAME: Noise-Cancelling-Feature
• FORM FACTOR: Closed-back
• NOISE CONTROL: Active Noise Cancellation
• BATTERY LIFE: 30 hours
• PRODUCT DIMENSIONS: 2 x 7.9 x 9.7 inches
• ITEM WEIGHT: 5.3 ounces
• GENERAL: TYPE: Open air, dynamic
• DRIVER UNITS: 38 mm, dome type
• POWER HANDLING CAPACITY: 100mW
• IMPEDANCE: 20 ohms at 1 kHz (when the power is on) 65 ohms at 1 kHz (when the power is off)
• SENSITIVITY: 106 dB/mW (when the power is on) 104 dB/mW (when the power is off)
• FREQUENCY RESPONSE: 30 – 15,000 Hz
• FREQUENCY RANGE OF ACTIVE NOISE ATTENUATION: 40 – 1,500 Hz, more than 10 dB at 300 Hz
• CORD: 1.5m (59 1/8 inches)
• PLUG: Gold plated L-shaped stereo mini plug
• POWER SOURCE: DC 1.5 V, 1 R03 (size AAA) battery
• MASS: Approx. 150 g (5.3 oz) including battery

Introduction

You can listen to more music while reducing outside noise while using these Sony noise-canceling headphones. Your listening surroundings will be quieter thanks to an integrated noise-canceling circuit that creates an anti-sound signal by synthesizing background noise. Additionally, headphones have strong neodymium magnets, an in-flight plug adaptor, a carrying pouch, a sleek swivel folding design for simple storage, and a carrying case.

WARNING

• To prevent fire or shock hazard, do not expose the unit to rain or moisture.
• To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
• For the customers in the U.S.A.

WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Owner’s Record

The model number is located at the left inner side of the headband. The serial number is located inside the battery box. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. MDR-NC6  Serial No.

FEATURES

• Noise-canceling headphones reduce ambient noise and provide a quieter environment to enhance audio entertainment. Ambient sound is synthesized with an anti-sound signal produced by the noise canceling circuit and reduced. (Over 10 dB is reduced at 300 Hz.)
• Slim swivel folding style for smart carrying and easy stage.
• Neodymium magnets are used to deliver powerful sound.
• Operates as passive headphones when the noise canceling circuit is not activated.
• A plug adaptor is supplied to connect directly to stereo or dual jack of in-flight music services.

INSTALLING A BATTERY

1. Open the lid of the battery case on the right inner side of the headphone.

2. Insert one R03 (size AAA) battery by matching the e and E on the battery to the e and E in the battery case.

3. Close the lid.

BATTERY LIFE

1 1 kHz, 1 mW + 1 mW input

• 2 Time stated above may vary, depending on the temperature or conditions of use.

WHEN TO REPLACE THE BATTERY
Replace the battery with a new one when the POWER indicator dims. The noise canceling feature may not work correctly if battery power is low.

LISTENING TO MUSIC

1. Connect the headphones to the AV equipment.

• WALKMAN is a trademark of Sony Corporation.
• May not be compatible with some in-flight music services.

2. Turn on the power of the headphones.

The POWER indicator lights in red. When the power is turned on, ambient noise is reduced, and you can listen to music more clearly at a lower volume.

3. Put on the headphones so that the ear pads cover your ears.

4. Turn on the power of the AV equipment.

NOTES ON USING ON THE AIRPLANE

• The supplied plug adaptor can be connected to dual and stereo mini jacks.

• Do not use the headphones when use of electronic equipment is prohibited or when use of personal headphones for in-flight music services is prohibited.

If you have any questions or problems concerning the system that are not covered in this manual, please consult the nearest Sony dealer.

AFTER LISTENING TO MUSIC

Turn off the power of the headphones.

NOTES

• The noise canceling function is only effective for noise in the low-frequency band. Although noise is reduced, it is not canceled completely.

• Do not cover the microphone of the headphones with your hands. The noise canceling function may not work properly.

• If you cover the microphone of the headphones with your hands, howling may occur. In this case, move your hands away from the microphone.

• The noise canceling effect may vary depending on how you wear the headphones.

• You can use the headphones without turning on the power. In this case, the noise canceling function is not active, and the headphones operate as passive headphones.

FOLDING THE HEADPHONES

The driver units rotate to make them flat for easy storage in the carrying case (supplied) or a seat pocket.

PRECAUTIONS

The headphones contain a noise-canceling circuit.

WHAT IS NOISE CANCELING?

The noise canceling circuit actually senses outside noise with built-in microphones and sends an equal-but-opposite canceling signal to the headphones.

• The noise canceling effect may not be pronounced in a very quiet environment, or some noise may be heard. In such a case, turn the POWER switch off.
• When you turn the POWER switch on, the operation sound of the noise canceling may be noticeable. This is not a malfunction.
• The noise canceling function is only effective for noise in the low-frequency band. Although noise is reduced, it is not canceled completely.
• When you use the headphones on a train or a car, noise may occur depending on street conditions. In such a case, turn the POWER switch off.

NOTES ON USAGE

• Clean the headphones with a soft dry cloth.
• Do not leave the plug dirty otherwise, the sound may be distorted.
• Be sure to consult a Sony dealer when the earpads become dirty or damaged, or when the headphones require repair work.
• The CE mark on the unit is valid only for products marketed in the European Union.
• Do not leave the stereo headphones in a location subject to direct sunlight, heat or moisture.

NOTES ON HEADPHONES PREVENTING HEARING DAMAGE

Avoid using headphones at high volume. Hearing experts advise against continuous, loud, and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use. Do not listen with headphones while driving or cycling As your headphones reduce outside sounds, it may cause traffic accidents. Also avoid using them where hearing must not be impaired, for example, at a railroad crossing, a site of construction, etc.

TROUBLESHOOTING

NO SOUND

• Check the connection between the headphones and the AV equipment.
• Check that the connected AV equipment is turned on.
• Turn up the volume of the connected AV equipment.

MUFFLED SOUND

• Turn down the volume of the connected AV equipment.
• Replace the battery.

THE POWER DOES NOT TURN ON

• Check if the battery has expired (the POWER indicator dims). Replace the battery with a new one.

HOWLING

• If you cover the microphone of the headphones with your hands, howling may occur. In this case, move your hands away from the microphone.

Frequently Asked QUESTIONS

• On my Sony headphones, how can I use the noise-canceling feature?
  When the headset is off, press and hold the button for roughly 2 seconds to turn it on. “Power on” is the voice prompt. As soon as the headset is turned on, the noise-canceling feature is activated immediately. The NC button’s indicator (green) turns on when the noise canceling feature is activated.

• Can you use Sony headphones without playing music?
  The ability to cancel out background noise in busy environments like a train or airplane might be useful. The Sony Headphones Connect app lets you modify the “Auto-off” option of the WH-1000XM3/WF-1000XM3*.

• How durable are Sony’s noise-canceling headphones?
  You’ll have enough power for even lengthy excursions away thanks to the enormous 30 hours of battery life. Additionally, if you use the optional AC adapter, you can charge quickly and enjoy 5 hours’ worth of battery life in just 10 minutes.

• Does noise cancellation work in the absence of music?
  Fortunately, noise-canceling headphones are excellent at reducing ambient noise even when they aren’t playing music. They can easily lessen the noise of crowded streets or stores. However, they are significantly more helpful for ambient noise, which is persistent and repetitive noise.

• What distinguishes noise cancellation from ambient sound?
  Noise cancellation is different from ambient sound mode in that the latter reduces ambient noise while the former increases it. When you want to block out distracting background noise so that you can concentrate on your music or your job, you utilize noise canceling mode.

• Can noise cancellation be disabled?
  Yes. You can adjust the sensitivity to any level you like, even different on each side. or it might be turned off entirely.

• Why won’t my noise cancellation work?
  If dirt or earwax accumulates in the region depicted below, Active Noise Cancellation may occasionally be compromised. If this occurs, you can encounter a reduction in bass sound. an increase in ambient noise, such as that from traffic or airplanes.

• My Sony headphones are charging, but can I use them?
  No. The headphones cannot be charged while being worn. However, Sony does include a Micro-USB to 3.5mm cable that you can use if your battery dies and you still want to use your headphones.

• How much time does it take for Sony noise-canceling headphones to charge?
  You’ll have enough power for even lengthy excursions away thanks to the enormous 30 hours of battery life. Additionally, if you use the optional AC adapter, you can charge quickly and enjoy 5 hours’ worth of battery life in just 10 minutes.

• How much time does it take Sony headphones to charge?
  Make sure the micro-USB cable plug is connected in the manner indicated in the example below. When the headset and computer are connected, charging begins. Ensure that the red indicator is lit up. The indicator (red) automatically turns off after charging is finished, which takes roughly 2.5 hours.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>