Paul Neuhaus 4590-18 Business Desk Lamp User Manual
- June 5, 2024
- Paul Neuhaus
Table of Contents
Paul Neuhaus 4590-18 Business Desk Lamp
INSTRUCTION
Radius of action of the arm and the base of the lamp:
- Please watch the lamp base when you adjust its arm.
- The arm of the lamp has a radius of action of 150°. (If the joint is overloaded, this can lead to damage)
ABOUT
- Please connect the power supply to the back of the lamp
- Touch the button to turn on/off the lamp and dim it.
- Battery replacement
FUNCTION
Calendar and ringtone setting options
Set date and time
1. Normal mode: Press SET to switch to Date and Time mode. Press SET again to
move to the next setting. The order of the settings is as follows:
Hours–Minutes–Year–Month-Day Press UP and DOWN to select weeks in the
calendar.
2. Setting mode: Press MODE or do not use the lamp for 60 seconds for it to
return to normal mode.
3. Normal mode: Press UP to change to 12 or 24-hour format.
4. Normal mode: Press DOWN to change unit(Fahrenheit/Celsius).
Set ringtone
1. Normal mode: Press MODE to enter ringtone setting mode.
2. Ringtone Mode: Press SET to enter setting mode. Press SET again to go to
the next setting. The order of the settings is as follows: Hours–Minutes–Delay
before snooze function starts-Sound Press UP and DOWN to adjust.
3. Ringer Mode: Press UP and DOWN to toggle snooze and ringer on and off.
Press this button again to move to the next setting. The order of the settings
is as follows: Enable ringtone–Enable snooze function–Disable ringtone and
snooze function
4. Once the buzzer has started, it lasts for 1 minute (factory setting can be
changed). The snooze function then starts automatically. To start the snooze
function manually, you can press UP, DOWN or MODE. Press SET to turn off the
buzzer and activate the snooze function.
SPECIFICATIONS
- Color temperature 3000K
- CRI >80Ra
- Absorbed power 5V 1A
- Material ABS+rubber
- Nominal power 230 LM
- Luminous flow 6W
Attention
- Please do not disassemble the product yourself to avoid electric shock.
- Please use the adapter and plug prescribed by the supplier to maintain the normal running.
- Do not bend the movable joint too much to avoid damage.
- Please do not use this lamp in a very hot or very humid environment.
- Never look at an LED light source directly to avoid eye damage.
- If the following cases should occur, please disconnect the mains plug and no longer use the lamp:
- The socket or mains plug breaks.
- The pellet smokes or drips.
- The casing or neck joint breaks.
- Lamp smokes or sparks.
- The lamp flickers unusually or the bulb breaks.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>