boAt Rockerz 660 Wireless Headphones User Manual

boAt Rockerz 660 Wireless Headphones

Package Contents

• 1 x Rockerz 660
• 1xUSB Type C charging cable
• 1x AUX Cable
• 1 x Manual
• 1xWarranty Card
• 1x Catalogue

To Pair with Bluetooth

1. When switched off press and hold the MFB (multifunction button) for 3 seconds to switch the headphone on It will automatically enter
   pairing mode with a prompt, the blue and red LEDS flash alternatively to Indicate the same

2. Open Bluetooth on your device and search for “Rockerz 660″in the list of available devices

3. ChooseRockerz 660 from the list and if asked enter the pairing password 0000 to establish Bluetooth connectivity

4.  Once successfully connected, the blue LED flashes once every five seconds to indicate the same
   Note:The headphone automatically turns off f there is no pairing established in 5 minutes

Functions

1. Power on: When switched off, press and hold MFB for3 seconds A voice prompt will. confirm the same. The red and blue LEDs will flash to indicate the same

2.  Power of: in any mode, press and hold the MFB for 5 seconds. A voice prompt will confrm the same The red LE Ds vill flash for 1 second before the device turns off

3. Play/Pause: Single tap the MFB to play/pause music OR In-Ear Detection: You can lock in the headphones to your ears in order to play a song or remove them to pause a song. This headphone is equipped with an In-ear Detection feature that detects whenever the user is on the headphone for listening and vice versa.

4. Volume up: Tap the volume+burton in steps to increase the volurne. A beep will indicate the maximum volume

5. Volume down: Tap the volume button in steps to decrease the volume. A beep will indicate nirimum volume

6.  Answer/End cal Tap the MFB once when answering or ending a call to complete the action

7. Reject call: Press and hold the MFB for 2 seconds during an incoming call to reject the call

8. Previous Trock: To go to the previous track, press and hold the buton for seconds,

9. Next Track: To skip to the next track, press and hold the+” button for 2 seconds

10. Reset Device (Clear Paired List): Press and hold the+andbuttons Simultaneously for 5 seconds to clear the previous list of connected devices The red and blue LEDs will flash 3 times to indicate the same

11. Dual Pairing: To connect Rockerz 660 to two devices simultaneously, firstly connect the headphone to one of the devices. Then, switch both
    the headphone and the device off thereafter, connect the headphone to the second device, and again switch the first device on. The headphone will get connected to both devices. If not, connect the first device manually once again to activate dual pairing

12. Voice Assistant Long press the MFB for 2 seconds to wake up smart voice assistant

13.  Redial: Triple tap the MFB for redialing the last contacted number

14.  EO Mades: You can switch between Signature Sound mode [Bass\ Mode) and Balanced Mode by short pressing the EQ button

Signature Sound Mode is boAts default bass mode, while Balanced Mode is more suitable for podcasts, news and voice-based media.

Charging

Use a USB Type C charging cable to charge the headphone through either a laptop or an adaptor.

1. Low Battery: When the remaining talk time is less than 10 minutes, there is a ‘low battery’ prompt and red LED flashes quickly to indicate the same
2. Charging: Solid red LED indicates that the headphone is being charged (please note that the headphone cannot be turned on while charging).
3. Fully charged: Solid blue LED indicates the same.

Specifications

Safety Precautions

• Please don’t dismantle the product in any way or remove the product’s battery by yourself. as this can lead to a free or electrical breakdown. Any maintenance or servicing of the headphones should be done only through a qualified service provider/manufacturer
• Please clean the headphones with the utmost of care with only a damp soft cloth. if cleaning is required. Please do not use any oily volatile liquid. In addition, ensure that the headphones are kept away from extremely hot or cold substances.
• Ary damage to the headphones that is NOT a manufacturing issue will make the product’s warranty null and void.
• Do not use headphones when it is unsafe to be wearing them, such as while operating a vehicle crossing a street, or during any activity where full awareness of your surroundings Is required.
• To avoid damage to your hearing make sure that the volume on your music player is at an appropriate level when you are putting on the headphone. Exposure to any noise level at or above 85 dB can gradually lead to a loss of hearing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>