Shenzhen Yunzhiju Technology TY-DIY-S01 WiFi Relay Switch User Manual
- June 5, 2024
- Shenzhen Yunzhiju Technology
Table of Contents
Shenzhen Yunzhiju Technology TY-DIY-S01 WiFi Relay Switch
Checklist before using the device
- Your USB power adapter should be more than 500mA output
- Your smartphone or tablet should have connected a 2.4G WiFi internet
- The device only supports 2.4G WiFi. If you use a 5G router (it provides two WiFi Signal:5G and 2.4G), please select the 2.4G WiFi to connect your smartphone.
- Download and install the Tuya Smart APP or Smart Life APP from APP Store or Google Play Store. Register and log in.
- During the pairing process, make sure that your oS or Android device and the device are within the range of your WiFi router.
- Make sure your router is MAC-open, if not, please cancel the router’s MAC filtering setting first
Specifications
Add Device
- Power up the device by micro-USB or DC 7-32V terminal
- Keep pressing the pairing button (for 5seconds) until led indicator fast blinks
- Launch the APP, Tap the icon + on the top right to add a device. Then select Electrician Socket (WiFi), confirm the indicator LED rapidly blinks.
- Select the 2.4G WIFl as the one your mobile device connects with, Input correct passwords Then, Tap Next.
- It will auto-connect with the device. The process will take 1 minute. Once the process is complete, it will prompt you that you can rename the device.
Enter a new name and Save.
Note: If you fail to add it during the process, it will prompt you the FAQ, please read carefully and retry accordingly.
Inching mode
Once you press the manual switch or control from the app, the relay will
activate for a moment (The time you set on APP), then release automatically.
You can use it to control the gate/door opener/elevator/computer/remote
controller key/l any momentary buttons.
Selflock mode
Once you press the manual switch or control from the app, the relay will
activate to keep ON or OFF normally
You can use it to control the light/fan/humidifier or other home appliances.
Self-locking
Work with Alexa
- 0pen Alexa APP, tap on the menu on upper left comer, Go to Skills.
- Enter “Tuya Smart” or “smart life” in the search field and search.
- Tap Tuya smart” or “smart life”
- Enable the skill
- Enter your account information and tap on “Log in” to link your account to your Amazon account.
Works with Google Home
- Launch Google Home app, tap the menu.
- tap Home control.
- Under Devices, tap the + icon.
- Tap Tuya Smart” or “Smart Life”
Work with Siri
- Tap “Smart” on the bottom of the APP
- Tap +” on the right top of the APP.
- Select “Scene” enter smart setting
- Enter your Smart Name on the top. Such as “Turn on inching”
- Tap “+” on the right to add one or more execution actions.
- Select your inching device, set the inching time on your APP.
- Tap “Set Siri triggering scenario0”.
- Tap the button on the bottom, Say out your command for Siri. Such as “Turn on inching”
- Tap “Done” on the right top
- Tap “Save” on the right top.
- Just speak to your iPhone “Hey, Siri, Turn on inching”, “OK”.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help with an important announcement
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01
List of applicable FCC rules
CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the
modular transmitter
Specific operational use conditions
This module is a stand-alone modular. If the end product will involve Multiple
simultaneously transmitting conditions or different operational conditions for
a stand-alone modular transmitter in a host, the host manufacturer has to
consult with the module manufacturer for the installation of the method in the
end system.
Limited module procedures
This module is a Limited single modular without shielding, host manufacturer
have to consult with the module manufacturer for the module limiting
conditions when integrating the module in the host.
module manufacturer should review detailed test data or host designs prior to
giving the host manufacturer approval.
Trace antenna designs
Not applicable
RF exposure considerations
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Antennas
This radio transmitter 2A7TT-TYDIYSO1 has been approved by Federal
Communications Commission to operate with the antenna types listed below, with
the maximum permissible gain indicated. Antenna types not included in this
list that have a gain greater than the maximum gain indicated for any type
listed are strictly prohibited for use with this device. 
Label and compliance information
The final end product must be labeled in a visible area with the following”
Contains FCC ID: 2A7TT-TYDIYS01″.
Information on test modes and additional testing requirements
Host Host manufacturer which installs this modular with limited modular
approval should perform the test of radiated emission and spurious emission
according to FCC part 15C:15.247 and 5.209 requirements, only if the test
result complies with FCC part 15.247 and 15.209 requirement, then the host can
be sold legally
Additional testing, Part 15 Subpart B disclaimer
Host manufacturer is responsible for compliance of the host system with the
module installed with all other applicable requirements for the system such as
Part 15 B.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>