BOAT Stone 500 Portable Bluetooth Speaker User Manual

BOAT Stone 500 Portable Bluetooth Speaker

Thank you for purchasing the boAt Stone S00. You are now just a step away from the realm of pure audio bliss. Please follow this manual carefully in case of any doubts and difficulties that arise Please note that playtime will vary depending on the selected volume level. You can stay plugged into the sound via Bluetooth wireless technology, USB, AUX, or FM compatibility. This portable wireless speaker has been designed for a smooth interface that requires minimal effort.

PACKAGE CONTAINS

• 1N Portable Bluetooth 5peaker
• 1N User Manual
• IN Type C Charging Cable
• IN Audio Cable
• IN Warranty Card
• 1N Catalogue

PRODUCT DETAILS

Power ON/OFF

• Long press the power button for 2 seconds to switch the speaker ON Similarly, long press the Power button again for 2 seconds to switch the speaker off.

BASIC functions

Note: Playtime varies according to the level of volume.

BLUETOOTH CONNECTIVITY

1. Turn the speaker on and the LED blinks in blue.
2. Activate the phone’s Bluetooth furnctioriality and search for Stone 500 As soon as the peoker is selected by you and paired, there comes a sound prompt indicating pairing, and the blue LED tum steady.

Note

• The speaker can automatically reconnect to the last paired device
• The speaker gets automatically turned off if there’s no pairing established in 10 minutes.

TWS CONNECTION

1. Tum the speakers on that you require to be forged into one, both under Bluetooth mode. You need to set up any one of the two units
2. Long press the Mode button of one of the speakers: a sound is heard confirming the TWS pairing.
3. During the pairing of the two speakers, the host speaker’s LED remains solid blue while the secondary speaker’s LED flashes in blue for 5 seconds Once they get paired, the secondary speaker LED tums into solid blue.
4. After a few seconds, when the two speakers get paired with each other, open the phone’s Bluetooth settings and search far Stone.

Note: Long press the Mode button if you want to disconnect the TWS functionality

AUX MODE

• Turn on the speaker
• Connect the speaker to your media device via the provided AUX cable and at the playback.

USB MODE

• Turn on the speaker
• Insert the USB media storage device into the USB port on the speaker
• Playtsock starts automatically

FM MODE

• Insert the charging cable into the charging port which acts as a receiving antenna
• Use the Mode button to change the playback mode to FM
• Short press the Power button to start auto 3canring the radio stations
• Once the scan is complete, you can long-press the +/-button ta change the stations.

CHARGING

• Connect one of the provided charging cables to the charging input and the other end to an adaptor of DC SV 2A
• During the sharing sate the charging LED indicator is solid red in color
• Once the battery gets fully charging LED turns off

Note

• Please don’t use the speaker while it is in charging as it may decrease the battery& performance
• The unit does not have a power bank function, the USB port is only for music playback. It’s forbidden to charge another device via this unit or to connect another device via a US& cable.

SPECIFICATIONS

WARNING

• Please keep this product safe from coming in contact with any liquid don’t use/store this product in extreme temperatures
• Please keep the product away from anything that generates heat, such as radiators, or stoves, in order to have hearing protection and an extended speaker life avoid listening to songs on maximum volume
• Don’t try ta diamante repair the product on your own.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>