boAt Rockerz 255 Bluetooth Headset User Manual

boAt Rockerz 255 Bluetooth Headset

Thank you for choosing boAt Rockerz 255 Neo. This manual is meant to guide you through to the shores of audio bliss without difficulty. Please think of this manual as your map. Knowledge of Bluetooth and device connection is essential for steering this boAt Therefore, we strongly advise that this manual is thoroughly read before use, and referred to in times of difficulty.

Package Contents

• 1x Rockerz 255 Neo
• 1x USB Type C harging cable
• 2x Pairs of additional earmuffs (Small &Large)
• 1x Manual
• 1x Warranty Card

Product Overview

1. Ear cap
2. Silicone ear hook
3. Headphone cable
4. Neckband
5. Multi-function button
6. Volume-\previous song
7. Volume+ next song
8. LED indicator
9. Microphone
10. Charging port

Power On

When switched off, separate the earbuds to power them on. Our Magnetic Smartbuds turn on automatically once the earbuds are separated from each other and vice-versa, The blue and red LEDs start flashing alternatively after the initial blue LED flash for a second

Power Off

Unite the earbuds to power them off. Red LED blinks once to indicate the device getting switched off

Bluetooth Connectivity

1. Turm on the Bluetooth functionality on your phone and switch on Rockerz 255 Neo
2. The neckband’s indicator starts blinking in blue and red altermatively to indicate that the earphones have gone into pairing mode
3. Then, select Rockerz 255 Neo from the list of available devices after search
4. If asked for a passkey, confrm the passkey 0000′ on phone
5. Once confirmed, the neckband and phone get connected vis Bluetooth indicated by a voice prompt

Note:
If there’s a connection history between the phone and the neckband then they automatically get reconnected in a working range whenever the neckband gets switched on while the phones Bluetooth mode is turned on.

Basic Functions

• Play: Short press the MFB (Multifunction Button) once to play
• Pause Short press the MFB once to pause
• Volume Up: Short press the Vol+ button in steps to increase volume
• Volume Down: Short press the Vol -button in steps to decrease volume
• Next Track: Press and hold the Vol+button for 2 seconds to skip to next track
• Previous Track: Press and hold the Vol- button for 2 seconds to return to previous track
• Answer Incoming Calls: Short press the MFB once
• Hang Up Ongoing Calls: Short press the MFB once
• Reject Calls: Double press the MFB
• Wake up Smart Voice Assistant: Long press the MFB for 2 seconds to wake up default voice assistant

Note:
the voice assistant doesn’t get triggered, then the functionality has to be frst enabled via your media device settings.

Charging

• Connect one end of the provided cable to the US8 Type C port on the headset and the other end to a wall adapter or laptop
• While charging, the indicator LED turns into steady red
• Once the headphone gets fully charged, the indicator turns into solid blue

Note:
Use only authorized/company chargers for the headset, as unauthorized ones may damage the same and invalidate the warranty on the headset as well The earphones cannot be utilized for listening purposes while it is in charging mode

BEAST Mode

Double press the MFB to switch to Low Latency mode, also known as the BEAST Mode. Once switched on, it gets notified via a sound prompt. Double press the MFB once again to tum it off and return to Music Mode Made for the Gamers-By Gamers, BEAST Mode reduces the latency significantly and improves the overall gaming experience.

Dual Pairing

To connect Rockerz 255 Neo to two devices simultaneously, firstly connect the earphone to one af the devices Then, switch both the earphone and the device’s Bluetooth off. Thereafter, connect the earphone to the second device, and again switch the first device’s Bluetooth on. The earphone gets connected to both devices. If not, connect the first device manually once again to activate dual pairing

ENx Tech

Our ENx tech algorithm cancels out the background noise so that you can be heard crystal dear via voice calls, One need not activate ENxas the mic is equipped with the same and activated by default Deliver your voice without interruptions anywhere traffic. railway stations, airports, workspace; literally anywhere

Other Functions

• if there’s no connection established when the Bluetooth is switched on then the device powers off automatically after a while
• If you receive an incoming call during playing music, the music automatically disconnects. When the call is done and disconnected, the music starts to play automatically from where it left

SPECIFICATIONS

ANOMALIES & Solutions

1. Mobile can’t search the headset
   • Check if the Bluetooth headset is powered on or off (When powered on, the LEDs blink with red and blue colors alternatively)
   • If it is powered on and the device still can’t connect, then please reboot the Bluetooth device arnd the phone
2. After connecting the headset with the phone, disconnection or noise Occurs
   • This may be due to the low power of the headset. Please charge the Bluetooth headset
   • There might be an obstruction between the headset and the phone or the distance between them exceeds the maximum range for signal reception
3. If the Voice Assistant support doesn’t respond If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device’s settings

Safety Cautions

• This is not a toy. The children are advised to use this under adult Supervisiaon.
• Avoid exposing the device to extremely hot or cold temperatures
• Avoid using the neckband for listening to fuil volumes in order to protect from hearing damage
• Please do not use the device under thunderstorms.
• Don’t dismantle the product in any way
• Please don’t clean the product using oily volatile liquid.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>