SCHELL 1-DN 25 Exposed WC flush valve unit User Manual

SCHELL 1-DN 25 Exposed WC flush valve unit

Assembly and service instructions Exposed WC flush valve unit DN 20

• Item no. 02 247 06 99, chrome, without isolating valve
• Item no. 02 248 06 99, chrome, with isolating valve

INSTALLATION

Technical instructions

1. Urinal flush valve unit according to DIN EN 12541,
   DN 20 class 6 for wash-out and wash-down WC
   DIN-DVGW BP0379
   Pipe dimension according to DIN 1988 part 3
   Flush quantity 4 – 9 l adjustable

2. Dimensions

3. Flush pipe connection kit, Item no. 03 209 06 99

4. Single parts:
   Flush pipe 28/26 mm, Item no. 03 100 06 99
   Flush pipe clip, Item no. 03 203 06 99
   Internal WC connector, Item no. 77 101 00 99

Assembly

1. FIush the water piping.
2. Hempen the thread.
3. Screw-in manually.
4. Adapt length of flush pipe.
5. Screw-in manually flushes pipe screw connection.
6. Open, control isolating valve.

Adjustment

1. Remove operation hood.
2. Adjust flush volume.
3. Take out flush pipe screw connection.
4. Regulate flush.
5. Regulate isolating valve open/closed.
6. Replace cartridge, if necessary.

Service

Spare parts

1. Operating hood
2. Cartridge, complete
3. Rosette
4. Flush pipe screw connection, complete

Operation

Operation 1 sec.

Maintenance tips

Maintenance tips: For cleaning, use only mild cleaning products containing Soap. Do not use any cleaning or disinfecting products that are abrasive or scouring or which contain alcohol, ammonia, hydrochloric acid, phosphoric acid or acetic acid. Do not clean with high-pressure or steam jet devices!

SCHELL GmbH & Co. KG
Armaturentechnologie
Raiffeisenstraße 31
57462 Olpe
Germany
Telefon +49 2761 892-0
Telefax +49 2761 892-199
info@schell.eu
www.schell.eu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>