Green works 24072 12 AMP ELECTRIC BLOWER IMPELLER Owner’s Manual
- June 5, 2024
- Green works
Table of Contents
- Green works 24072 12 AMP ELECTRIC BLOWER IMPELLER
- SPECIFICATIONS
- IMPORTANT SAFETY INSTRUCTIONS
- SPECIFIC SAFETY RULES FOR BLOWER
- SYMBOLS
- ELECTRICAL
- KNOW YOUR BLOWER
- ASSEMBLY
- PACKING LIST
- OPERATION
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED FOUR-YEAR WARRANTY
- EXPLODED VIEW
- PARTS LIST
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Green works 24072 12 AMP ELECTRIC BLOWER IMPELLER
SPECIFICATIONS
12 AMP ELECTRIC BLOWER/MULCHER WITH METAL IMPELLER
- Motor …………………………………………………………………. 120V, AC only, 60Hz, 12.0 Amps
- Impeller material ……………………………………………………………………….. Metal
- Air velocity ……………………………………………………………………………..Speed: 150-235MPH
- Air volume ………………………………………………………………………………………………..380 CFM
- Mulch ratio ……………………………………………………………………………………………..14:1
- Collection bag capacity ……………………………………………………………….1.2 Bushel
- Unit Weight ……………………………………………………………………………………………………. 9.26 Ib.
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in electric shock,
fire, and/or serious personal injury.
READ THESE INSTRUCTIONS BEFORE USING THE BLOWER
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
- Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not expose to rain; store indoors.
- Do not handle plug or tool with wet hands.
- Use outdoor extension cords marked W-A, W, SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or SJTOW-A. These cords are rated for outdoor use and reduce the risk of electric shock.
- Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.
- Keep all bystanders, children, and pets at least 50 ft. away.
- Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use face mask if operation is dusty.
- Wear eye protection which is marked to comply with ANSI Z87.1 when operating this product.
- Use extra care when cleaning on stairs.
- Do not leave appliance plugged in. Unplug from outlet when not in use and before servicing.
- Use only as described in this manual. Use only manufacturer’s recommended attachments.
- Use only identical manufacturer’s replacement parts and accessories. Use of any other parts may create a hazard or cause product damage.
- Keep hair, loose clothing, fingers and all body parts away from openings and moving parts.
- Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.
- Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get caught in moving parts of the machine or its motor.
- Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear that will protect your feet and improve your footing on slippery surfaces.
- Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
- Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance.
- Turn off all controls before unplugging.
- Avoid accidental starting. Be sure the power switch is not on before plugging in. Turn off power switch before unplugging.
- Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
- Do not use with damaged plug. If tool is not working as it should or has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center.
- Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication.
- Do not operate in poor lighting.
- Keep all parts of your body away from any moving parts and all hot surfaces of the unit.
- Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
- Check the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the machine.
- Do not pull or carry by cord, use cord as a handle, close a door on a cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or appliance with wet hands.
- Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk.
- Service on the product must be performed by qualified repair personnel only. Service or maintenance performed by unqualified personnel could result in injury to the user or damage to the product.
- In a double insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for a double insulated appliance must be identical to the parts they replace.
- Not intended for commercial use.
SPECIFIC SAFETY RULES FOR BLOWER
- Extension Cord – To reduce the risk of disconnection of appliance cord from the extension cord during operating, it is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make the knot as shown in figure 1, then connect the plug end of the power cord into the receptacle end of the extension cord. This method can also be used to tie two extension cords together.
- Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.) of at least 14 is recommended for an extension cord 50 feet or less in length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
- Do not point the blower nozzle in the direction of people or pets.
- Never run the unit without the proper equipment attached. Always ensure the blower tubes are installed.
- When not in use, blower should be stored indoors in a dry, locked up place—out of the reach of children.
- Maintain tool with care. Keep fan area clean for best and safest performance. Follow instructions for proper maintenance.
- Do not attempt to clear clogs from tool without first unplugging it.
- Do not pull or carry by cord, use cord as a handle, or pull cord around sharp edges or corners Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- To reduce the risk of electrical shock, do not expose to rain, do not use on wet surfaces. Store indoors.
- If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk.• Save these instructions. Refer to them frequently and use them to instruct others who may use this power tool. If you loan someone this power tool, loan them these instructions also. WHILE OPERATING UNIT AS A BLOWER
- Never point the blower in the direction of people or pets or in the direction of windows. Use extra caution when blowing debris near solid objects such as trees, automobiles and walls. OTHER SAFETY WARNINGS
- Be sure to secure the unit while transporting.
- Store the unit in a dry area, locked up to prevent unauthorized use or damage, and stored in a high place out of the reach of children.
- Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris. Clean after each use. See the Cleaning and Storage instructions.
- Keep these instructions. Refer to them often and use them to instruct other users. If you loan someone this unit, also loan them these instructions.
PROPOSITION 65
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
- Lead from lead-based paints
- Crystalline silica from bricks and cement and other masonry products
- Arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
SYMBOLS
Some of the following symbols may be used on this product. Please study them
and learn their meaning. Proper inter-pretation of these symbols will allow
you to operate the product better and safer. The following signal words and meanings are intended to explain the
levels of risk associated with this product.
SERVICE
Servicing requires extreme care and knowledge and should be performed only by
a qualified service technician. For service we suggest you return the product
to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only
identical replacement parts.
WARNING:
To avoid serious personal injury, do not attempt to use this product until you
read thoroughly and understand completely the operator’s manual. If you do not
understand the warnings and instructions in the operator’s manual, do not use
this product. Call GREENWORKS customer service for assistance.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
ELECTRICAL
WARNING:
THIS BLOWER IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN OR USE IN DAMP
LOCATIONS.
GUIDELINES FOR USING EXTENSION CORDS
USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good
condition. When using an extension cord, be sure to use one of heavy enough
gauge to carry the current your product will draw. An undersized cord will
cause overheating. The table below shows the correct size to use depending on
cord length and nameplate ampere rating. If in doubt, use the next heavier
gauge.The smaller the gauge number, the heavier the cord.
Ampere rating (on tool faceplate)
MINIMUM GAUGE FOR EXTENSION CORDS (AWG)
(WHEN USING 120V ONLY)
Amp Rating
Total Length of Cord in Feet (meters)
More Than| Not More Than| 25′ (7.6 m)| 50′ (15 m)| 100′
(30.4 m)| 150′ (45.7 m)
---|---|---|---|---|---
0| 6| 18| 16| 16| 14
6| 10| 18| 16| 14| 12
10| 12| 16| 16| 14| 12
12| 16| 14| 12| Not Recommended
Make sure your extension cord is properly wired and in good electrical condition. before use. Keep extension cords away from sharp objects, excessive heat and damp or wet areas. Use a separate electrical circuit for tools. This circuit should not be less than #12 wire and should be protected with a 15 A time delayed fuse. Before connecting the motor to the power line, make sure the switch is in the OFF position and the electric current is rated the same as the current stamped on the motor nameplate. Running at a lower voltage will damage the motor.
WARNING:
CHECK EXTENSION CORDS BEFORE EACH USE. IF DAMAGED REPLACE IMMEDIATELY. NEVER
USE TOOL WITH A DAMAGED CORD SINCE TOUCHING THE DAMAGED AREA COULD CAUSE
ELECTRICAL SHOCK RESULTING IN SERIOUS INJURY.
ELECTRICAL CONNECTION
This tool is powered by a precision built electric motor. It should be
connected to a power sup-ply that is 120 volts, 60 Hz, AC only (normal
household current). Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power and the motor will
overheat. If the product does not operate when plugged into an outlet, double
check the power supply.
SPEED AND WIRING
The speed is not constant and decreases under a load or with lower voltage.
For voltage, the wiring in a shop is as important as the motor’s horsepower
rating. A line intended only for lights cannot properly carry a cultivator
motor. Wire that is heavy enough for a short distance will be too light for a
greater distance. A line that can support one cultivator may not be able to
support two or three tools.
FOR ALL DOUBLE-INSULATED APPLIANCES
Replacement Parts — When servicing use only identical replacement parts.
Polarized Appliance Connections — To reduce the risk of electric shock,
this appliance has a polarized plug (one blade is wider than the other) and
will require the use of a polarized exten-sion cord. The appliance plug will
fit into a polarized extension cord only one way. If the plug does not fit
fully into the extension cord, reverse the plug. If the plug still does not
fit, obtain a correct polarized extension cord. A polarized extension cord
will require the use of a polarized wall outlet. This plug will fit into the
polarized wall outlet only one way. If the plug does not fit fully into the
wall outlet, reverse the plug. If the plug still does not fit, contact a
qualified electrician to install the proper wall outlet. Do not change the
equipment plug, extension cord receptacle, or extension cord plug in any way.
KNOW YOUR BLOWER
The safe use of this product requires an understanding of the information on
the tool and in this operator’s manual as well as a knowledge of the project
you are attempting. Before use of this product, familiarize yourself with all
operating features and safety rules. (See Fig. 2)
BLOWER TUBE
The blower tube can be easily installed on the blower without any additional
tools.
CORD RETAINER
A convenient cord retainer helps keep the extension cord connection secure
during blower operation.
MULCHER TUBES
The mulcher tubes can be added without any additional tools to provide
mulching and vacuum-ing functionality.
ASSEMBLY
UNPACKING
- This product requires assembly.
WARNING:
This new product has been shipped in a partially assembled condition as
described below. Carefully check the packing list below to ensure all items
are included in the package; the packing list describes all loose items that
are not assembled to the product as shipped. Do not operate the product if any
packing list items are already assembled to your product when you unpack it.
Call the customer service number below for assistance. Operation of a product
that may have been improperly pre-assembled could result in serious personal
injury.
- Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
- Inspect the product carefully to make sure no breakage or damage occurred during shipping.
- Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
- If any parts are damaged or missing, please call 1-888- 909-6757 for assistance.
PACKING LIST
- Electric blower
- Blower tube
- Mulcher tubes
- Bag
- Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this product until the
parts are replaced. Failure to heed this warning could result in serious
personal injury
WARNING:
Do not attempt to modify this product or create accessories not recommended
for use with this product. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply
could result in accidental starting and possible serious personal injury.
ASSEMBLE AS A MULCHER
- Slide the front and rear mulcher tubes together until the lock button engages. (See fig 3)
- Pull the lock button forward to disengage the gate. Hold the gate open. (See fig 3.1)
- Insert the “wedged” end clip of the mulcher tube into the rear clip. (See fig 3.2). Push the “hooked” end clip of the mulcher tube into the front clip. (See fig 3.3). Press the lock button back to engage the mulcher tube. (See fig 3.4)
- To remove mulcher tubes, follow the steps (3) (2) (1).
- Insert the bag adaptor into the blower outlet. Lock the bag adaptor with the lock button. To re-move the bag, simply press lock button and remove bag. (see Fig.5).
NOTE: It may be necessary to remove the blower tube or mulcher tubes to clear a blocked tube or impeller.
WARNING:
To prevent serious personal injury, make sure the switch is in the OFF
position, it is unplugged, and the impellers have stopped before attaching or
removing tubes.
ASSEMBLE AS A BLOWER
- Slide blower tube forward until the notched areas on the blower housing click into the slots on the tube.
- Insert the concentrator nozzle onto the regular nozzle to lock. (Concentrator nozzle is used to beds. under decks, etc.).
INSTALLING BAG WITH SHOULDER HARNESS
While standing in the operating position adjust the length to fit the
operator’s size. Pull the tab to lengthen, pul the strap to shorten.
OPERATION
CONNECTING THE POWER CORD
- Secure the extension cord to the motor housing using the notch at rear of blower. This prevents accidental removal of the electrical cord.
- Plug the female end of the electrical cord into the receptacle at the back of the unit.
STARTING/STOPPING THE BLOWER/MULCHER
- Roll the speed dial forward (A) until a positive click is heard and the blower turns ON.
- Rotate the dial forward to increase speed from 150 to 235 MPH.
- To turn off: Rotate the dial bacwards (B) until unit shuts off.
IMPORTANT: While in mulching mode the blower MUST be in high speed
position.
HOLDING THE BLOWER/MULCHER
Before operating the unit, stand in the operating position. Check for the
following:
- Operator is wearing proper clothing, such as boots, safety glasses or goggles, ear/hearing pro-tection, gloves, long pants and a long sleeve shirt.
WARNING:
To avoid serious personal injury, wear goggles or safety glasses at all times
when operating this unit. Wear a face mask or dust mask in dusty locations.
WARNING:
To prevent serious personal injury or damage to the unit, make sure the
blower tube or the mulcher tubes and the bag are in place before operating the
unit.
OPERATING TIPS
- The bag is installed and zipped closed (when used as a mulcher).
- Be sure the bag is zipped closed before operating the unit.
- Assure the unit is not directed at anybody or any loose debris before starting the unit.
- Verify that the unit is in good working condition. Make sure the tubes and guards are in place and secure.
- Always hold the unit with both hands when operating.
- Keep a firm grip on both the front and rear handle or grips.
- To reduce the risk of hearing loss associated with sound level(s), hearing protection is required.
- Use the shoulder strap when using unit as a mulcher.
- Operate power equipment only at reasonable hours—not early in the morning or late at night when people might be disturbed. Comply with times listed in local ordinances. Usual recommendations are 9:00 am to 7:00 pm, Monday through Saturday.
- To reduce noise levels, limit the number of pieces of equipment used at any one time.
- To reduce noise levels, operate power blowers at the lowest possible speed to do the job.
- Use rakes and brooms to loosen debris before blowing.
- In dusty conditions, slightly dampen surfaces.
- Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.
- Watch out for children, pets, open windows or freshly washed cars, and blow debris safely away.
- Clean up after using blowers and other equipment. Dispose of debris appropriately.
NOTE: Please ensure that the Mulch/Vacuum Gate is completely closed and locked.
AIR VENTS
Never cover air vents. Keep them free from obstructions and debris. They must
always remain clear for proper motor cooling.
WARNING:
To avoid serious personal injury, do not wear loose fitting clothing or
articles such as scarves, strings, chains, ties, etc., that could get drawn
into the air vents. To make sure long hair does not get drawn into the air
vents, tie back long hair.
OPERATING AS A BLOWER
Hold the blower firmly. Sweep from side to side with the nozzle several inches
above the ground or floor. Slowly advance the unit, keeping the accumulated
pile of debris in front of you. Most dry blowing operations are better suited
to low speeds, rather than high. High speed blowing is a better way to move
heavier items like large debris or gravel.
OPERATING AS A MULCHER
Hold the vac firmly, tilting the mulcher tubes (2-4 in. or 5-10 cm), and use a
sweeping action to collect light debris. The debris will flow into the bag.
Items such as small leaves and twigs will be mulched as they pass through the
fan housing. For longer bag life and increased performance, empty the bag
often.
CLEARING A BLOCKED TUBE / IMPELLER
WARNING:
To avoid serious personal injury, be sure the unit is OFF and unplugged before
clearing the impeller.
WARNING:
To avoid serious personal injury, always wear gloves to protect yourself
from the impeller blades or other sharp objects.
- Slide the Power switch down to the OFF position until the unit comes to a complete stop.
- Unplug the unit.
- Remove the blower tube or mulcher tubes and the bag.
- Carefully remove material blocking the tube or impeller. Inspect the blades to ensure no damage has occurred. Rotate the impeller blades by hand to ensure the blockage is completely cleared.
- Reinstall the blower tube or mulcher tubes and the bag.
- Plug the unit back into the power supply.
MAINTENANCE
SERVICING DOUBLE-INSULATED UNITS
This unit is double insulated. In a double-insulated unit, two systems of
insulation are provided instead of grounding. There is no grounding provided
and no means of grounding should be added to this unit. Extreme care and
knowledge of the system is required when servicing a double-insulated unit.
Service should be performed by qualified service personnel only. Replacement
parts for a double-insulated unit must be identical to the parts they replace.
Refer any repairs to an authorized service dealer. A double-insulated unit is
marked with the words “double insulation” or “double insulated.”
CLEANING THE UNIT
WARNING:
To avoid serious personal injury, always turn the unit off and unplug it
before cleaning or servicing. Use a small brush to clean off the outside of
the unit. Do not use strong detergents, household cleaners that contain
aromatic oils such as pine and lemon, and solvents such as kerosene as they
can damage plastic housings or handles. Wipe off any moisture with a soft, dry
cloth.
CLEANING THE BAG
- Empty the bag after each use to avoid deterioration and obstructing air flow, which will reduce the performance of the mulcher.
- Wearing eye protection and a dust mask, clean the bag as needed. Turn the bag inside out after initial emptying and vigorously shake out dust and debris.
- Wash the bag once a year, or more often if needed:
- Remove the bag.
- Turn bag inside out.
- Hang it up.
- Hose it down thoroughly.
- Leave it hanging to dry.
- Turn bag right-side out and reinstall.
STORAGE
- Store the unit locked up to prevent unauthorized use or damage.
- Store the unit in a dry, well-ventilated area.
- Store the unit out of the reach of children
INSPECT EXTENSION CORDS
Inspect all extension cords periodically. Look closely for deterioration, cuts
or cracks in the insulation. Inspect the connectors for damage. Replace cords
if defective or damaged.
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|---|---|
Unit will not blow or mulcher. | 1. Bag full | 1. Empty the bag. |
2. Blocked tube | 2. Clear the blockage. | |
3. Blocked impeller | 3. Clear the blockage | |
4. Dirty bag | 4. Clean the bag. | |
5. Torn bag | 5. Replace the bag. | |
6. Bag unzipped | 6. Zip up the bag. | |
7. Unit unplugged | 7. Plug into an outlet or an extension cord. | |
Unit will not start. | 1. Unit is unplugged. | 1. Check cord to make sure it |
is plugged into an electrical outlet.
2. Power/speed switch is in the OFF position.| 2. Slide switch to high or
low.
3. Defective power switch.| 3. Call toll free helpline:
1-888-909-6757.
4. Vac tubes are not correctly installed.| 4. Check vac tubes to ensure that
they are allowing the switch to be engaged when correctly installed.
5. Intake gate/cover is not closed.| 5. Ensure that gate/cover is fully
closed an locked.
6. House circuit may have tripped.| 6. Check wall circuit breaker panel and
reset if necessary.
LIMITED FOUR-YEAR WARRANTY
GREENWORKS hereby warranties this product, to the original purchaser with
proof of purchase, for a period of three(3) years against defects in
materials, parts or workmanship. GREENWORKS , at its own discretion will
repair or replace any and all parts found to be defective, through normal use,
free of charge to the customer. This warranty is valid only for units which
have been used for personal use that have not been hired or rented for
industrial/commercial use, and that have been maintained in accordance with
the instructions in the owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
- Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or
- The unit, if it has not been operated and/or maintained in accordance with the owner’s manual; or
- Normal wear, except as noted below;
- Routine maintenance items such as lubricants, blade sharpening;
- Normal deterioration of the exterior finish due to use or exposure.
GREENWORKS HELPLINE (1 888 90WORKS):
Warranty service is available by calling our toll-free helpline, 9 a.m. to 5
p.m. EST. Monday – Friday at
1-888-909-6757 (1-888-90WORKS).
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power equipment unit or
attachment are the responsibility of the purchaser. It is the purchaser’s
responsibility to pay transportation charges for any part submitted for
replacement under this warranty unless such return is requested in writing by
GREENWORKS.
USA address:
Greenworks Tools P.O. Box 1238 Mooresville, NC 28115
Canadian address:
Greenworks Tools Canada Inc. 1110 Stellar Drive Unit 102 Newmarket, ON, L3Y
7B7
EXPLODED VIEW
PARTS LIST
ITEM NO. | PART NO. | DESCRIPTION | QTY |
---|---|---|---|
1 | 34105810 | blower tube | 1 |
2 | 36101209B-1 | 12A motor | 1 |
3 | 31106142 | PCB assembly | 1 |
4 | 3220313 | screw | 19 |
5 | 34901148 | dustproof sponge | 1 |
6 | 31107142 | power cord | 1 |
7 | 3410679-9 | lock button for blower tube | 1 |
8 | 34201808 | shockproof pad | 4 |
9 | 3320128 | bushing | 1 |
10 | 33901142 | impeller | 1 |
11 | 33203142 | blade | 1 |
12 | 3410127-5 | impeller nut | 1 |
13 | 34105142 | mulcher cover | 1 |
14 | 33401145 | torsion spring | 1 |
15 | 31108142 | lock button assy | 1 |
16 | 34106142 | upper mulcher tube | 1 |
17 | 34107142 | lower mulcher tube | 1 |
18 | 31105142 | collection bag assy | 1 |
19 | 34115142 | concentrator nozzle | 1 |