KJ headset KB10 Bluetooth Headset User Guide
- June 5, 2024
- KJ headset
Table of Contents
- KJ headset KB10 Bluetooth Headset
- TECHNICAL SPECIFICATIONS
- What’s in the package?
- KB-10 Overview
- How to use the headset
- PC connection using the USB dongle
- Bluetooth pairing
- Bluetooth call via applications of PC/Mobile
- Button features
- Download firmware
- FCC Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KJ headset KB10 Bluetooth Headset
TECHNICAL SPECIFICATIONS
Model Information
| Name | KB-10 |
|---|---|
| Device description | Bluetooth Headset |
| Weight | 136g |
| Packing | Headset Bag |
| Content | Headset, User guide, Charging cable, USB-A Bluetooth dongle |
Audio Information
| Speaker unit size | 30mm Ø |
|---|---|
| Speaker impedance | 16 Ohms |
| Speaker frequency range | 20Hz – 20,000Hz |
| Microphone dimension | 4*1.5mm |
| Microphone sensitivity | -32±2 dB |
| Microphone impedance | 2,200Ω 2V |
Connectivity
| Bluetooth version | Bluetooth 5.0 + EDR |
|---|---|
| Bluetooth support | HFP, A2DP, AVRCP |
| Operating range | Up to 30m |
| Compatibility | Mobile devices, iPad, MacOS, PC (using Dongle) |
Battery
| Talk time | Up to 12 hours |
|---|---|
| Music time | Up to 10 hours |
| Standby time | Up to 250 hours |
| Charging time | Up to 2 hours |
| Input voltage | DC 5V |
| Battery capacity | Rechargeable 300mAh |
What’s in the package?
- 1pcs x KB-10 Bluetooth Headset,
- 1pcs x USB A Dongle
- 1pcs x Charging Cable Charging Stand (Optional)
KB-10 Overview
How to use the headset
-
Once the On/Off switch is turned to the Bluetooth side, the headset will be on and automatically goes into paring mode looking for a device to connect. While doing so, it accounces its current battery status.
-
When the headset is in paring mode, blue LED will blink and stay on when connected with other devices.
-
Put the headset and adjust the headband to find your best fit. The microphone boom should be close enough to your
mouth in order to work properly. -
Turn On/Off switch to Off side to turn the headset off.
PC connection using the USB dongle
When the headset is on and the USB dongle is plugged into PC, blue LED from the dongle will blink trying to pair with the headset. In few seconds, the dongle will be paired with the headset and blue LED will stay on.
Bluetooth pairing
- It is better to have the headset and a mobile device/PC close together (less than 1m is ideal).
- Put On/Off switch to Bluetooth side. The headset will go into pairing mode flashing blue LED.
- Complete the paring by selecting KB-10 on your mobile device (or plug the dongle into PC). Blue light will stay on with successful pairing.
- If you want to pair the headset to another device, you can press and hold the MFB (Multi Function Button) to go into pairing mode again.
- KB-10 can be connected to 2 devices simultaneously, but it can only play 1 device at a time. It will automatically switch between 2 devices based on their sound signals.
Bluetooth call via applications of PC/Mobile
You can take/hang up the calls by using the Multi Function Button. For some applications the button may not be compatible to use. When you pick up a call, the Busy Light of the headset will light green and go off when a call ends.
Button features
- ON/OFF：Power On (Bluetooth pairing on) / Power Off
- Multi Function Button: Play / Pause, Call Pick up / Hang up, Press and hold to go into pairing mode MIC Mute：Toggle
- Microphone mute by pressing the button once
- Vol+ Key: Increase volume by short press. Hold down to play next song
- Vol- Key: Decrease volume by short press. Hold down to play previous song
- Speaker Mute Key: Toggle Speaker mute by pressing the button once
Download firmware
Go to the link below for updates and firmware for headset products https://www.kj-headset.co.kr/download
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.