WEGMAN Phone Holder User Guide
- June 5, 2024
- WEGMAN
Table of Contents
WEGMAN Phone Holder
First setup
Stick the holder to the desired place in the car
Remove the protective layer from the suction cup and press firmly. Then press
down the suction tab. The less air there is under the suction cup, the more
firmly it will stick.
Place your phone in the clamp
The easiest way to clamp your phone is to push the side of the phone against
the movable part of the clamp.
Position of your phone
Switch between portrait and landscape mode
Turn the clamp of the phone holder to quickly change between portrait and
landscape mode. The head can be rotated 360 degrees.
Tilt the head of the holder
For the best viewing angle, you can move the head of the holder up or down.
Tilt the holder with the phone inside.
Removing the phone
Removing the phone from the clamp
The easiest way to remove your phone from the clamp is to push the side of
the phone against the movable part of the clamp.
Removing the holder
Lift the suction cup flap to allow air to enter under the suction cup. Now
remove the holder.