zedt ap-smt-breaker02-1ch wifi smart switch User Guide
- June 5, 2024
- zedt
Table of Contents
zedt ap-smt-breaker02-1ch wifi smart switch User Guide
Parameter
Input: AC 100-240V 50/60Hz 16AMax
Output: AC 100-240V 50/60Hz 16AMax
Wi-Fi: IEEE 802.11 b/gin 2.4GHz
Material: PC V0
Size: 41x20x41mm
Checklist before using the device
- Your smart phone or tablet has connected to a 2.4G WiFi with internet.
- You have the correct WiFi password.
- Your smart phone or tablet must have access to APP Store, Google Play.
- Make sure that your router is MAC-open.
Download The App
- Start with “Smart Life” APP
- Register an Smart Life account.
- If you have Smart Life account, just log in.
Please wire the device according to the marking on the cover.
**ON/OFF operating principle:
The connected appliances work/stop through live wire power on/off . the device
must be power by L and N.
Warning: S1 and S2 can only be connected to the two ends of the wall, and cannot be connected to strong power such as zero fire line.**
The wiring diagram to conned the elednml appliance
The wiring diagram to connect the light.
- Power on after completion of wiring, and the device is turned on by default, Press and hold the button for about 5s seconds until the WiFil blue LED blinks fast.
- Enter the App, tap “+”in the upper right of the page to enter network connection page.
- Please make sure the device’s indicator light rapidly flashes (2 times per second) tap to go on to the next step.
- Input your Wi-Fi & password.
- Name your device.
- When the Wi-Fi LED is on , the device is online. Start to control now!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>