QHNAS Wireless Earbuds, Mini Bluetooth Earbuds User Guide
- June 5, 2024
- QHNAS
Table of Contents
QHNAS Wireless Earbuds, Mini Bluetooth Earbuds
Specifications
- BRAND: QHNAS
- MODEL NUMBER: H1
- COLOR: Black
- NOISE CONTROL: Active Noise Cancellation
- CONNECTIVITY TECHNOLOGY: Wireless, Bluetooth 5.1
- BLUETOOTH CHIP: Bluetooth 5.1
- CALL NOISE CANCELLATION: Physical noise reduction
- MICROPHONE TYPE: MEMS
- PLAYTIME PER CHARGE: 6H
- PLAYTIME WITH CHARGING CASE: 25H
- WATERPROOF GRADE: IPX5
- CHARGING METHOD: Type-C USB
- PRODUCT DIMENSIONS: 4.21 x 3.58 x 1.54 inches
- ITEM WEIGHT: 0.141 ounces
- BATTERIES: 3 Lithium Polymer batteries
Introduction
The wireless earphones will immediately connect to your associated Bluetooth devices once the charging case’s cover is lifted. Bluetooth 5.1 establishes a stable connection between your smartphone and the Bluetooth earphones and offers a quick and steady connection without any signal loss or music dropout. It also features a shorter latency and faster transfer rate. On a single charge, the wireless Bluetooth earphones can stream Hi-Fi stereo audio for up to 5 hours. The little charging case has an additional 20 hours of battery life and charges swiftly using USB-C.
High-fidelity sound is delivered by the upgraded 6mm dynamic drivers, which also restore audio authenticity and speech dynamics. The sound from a wireless earbud is excellent, with treble that is more crystal clear than CD grade and a soft bass. The immersive sound will make you feel as though you are at a concert. True tiny wireless earbuds provide a completely new wearing experience. Their compact design and light weight make them comfortable for your ears. When you wear the Bluetooth earphones while moving or jogging, they stay in place better and are less likely to slip out or get loose. The IPX5 water resistance makes them an excellent choice for sports, ensuring that you may spend your time exercising without worrying when you wear them when running, working out, etc.
WHAT’S IN THE BOX
- QHQO H1 (Black) True Wireless Headphones
- Charging case
- Three pairs of ear tips (S / M / L)
- USB-C cable
- Quick Start Guide
- User manual
HOW TO PAIR
- Take both earbuds out of the case. Touch and hold the touch-sensitive panel for 6s to power off.
- Touch and hold on the touch-sensitive panels on both earbuds for 10 seconds. The earbuds will turn on, clear their pairing list, and turn off again.
- Put both earbuds back in the charging case and close the lid to reset.
- Open the lid again, and both earbuds will turn on and enter pairing.
HOW TO SETUP
- Open the settings first.
- Tap Connections after that.
- Next, tap Bluetooth.
- In the top-right corner of your screen, select Scan.
- Next, hold down the power button on your headphones for a few seconds.
- Find your headphones and tap them at the end.
HOW TO CONNECT TO ANDROID
- The Notifications shade should be lowered.
- In the top row of icons, press and hold the Bluetooth symbol. …
- Ensure that the toggle switch is turned on at the top of the menu. …
- Tap.
Frequently Asked Questions
How can I tell when the battery in my wireless earbuds is full?
Bluetooth headsets all function differently. However, once your headsets have reached full charge, the earbuds usually start to glow. Red and green lights are most frequently used in headsets. A low battery level is indicated by the red light, while a full charge is indicated by the green light.
Should I always have earbuds on hand?
The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.
What does the blue light on earphones imply when they are charging?
The battery is charged if the exterior blue light is on. It can charge your headphones up to 10 times, according to the user instructions.
What does the earbuds’ red light signify?
Your headphones’ red or amber flashing usually indicates that the battery is getting low. A medium battery level shown by an orange light may indicate that you need to charge the headphones in the next few hours.
How long do wireless earbuds take to charge?
The earphones need about two hours to fully recharge. If the battery is low, you can extend its life by 10 to 20 minutes by charging it in the charging case. Connect the charging case to an approved wall charger or USB power source.
How can I simultaneously connect both earbuds?
Press the buttons on top of the earbuds twice fast and simultaneously to sync them. They should begin to pulse or breathe in blue and then begin flashing (searching for a device). Turn off your Bluetooth and remove the earbuds from their case.
Why aren’t my earbuds communicating with one another?
Your device’s Bluetooth setting should be disabled. Earbuds will automatically turn on when you remove them from the case. To manually sync them, double- press the left and right earbuds at the same time. NOTE: Give it another shot if it doesn’t work the first time.
Why can I attach only one Bluetooth earbud?
Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.
Where can I find louder earbuds?
Android: Activate Settings > Sound > Volume. For ringtone, notification, touch feedback, and media, there are four sound sliders. By turning on the switch Volume Keys for Media, you can additionally configure the volume keys to increase the volume either across all apps or in specific media apps.
Why won’t my phone and Bluetooth headphones pair?
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.