subframe M10 EVO Audio System User Manual
- June 5, 2024
- subframe
Table of Contents
subframe M10 EVO Audio System
Thank you!
Congratulations on purchasing a high-quality AUDIO SYSTEM product incl. GERMAN
SOUND.
Important: Completely read this operating instruction before installation
and use of the device.
Attention: Pay attention to advice and instructions of the car
manufacturer. Check the polarity when connecting the speakers.
Important: You will need your purchase receipt as proof of purchase for
all warranty repairs and for insurance purposes. Keep your receipt, owner´s
manual and packing materials in a safe location for possible future use.
Attention: Use of sound components can impair your ability to hear necessary
traffic sounds and may constitute a hazard while driving your automobile.
AUDIO SYSTEM GERMANY accepts no liability for hearing loss, bodily injury, or
property damage because of use or misuse of our products. We recommend
installing the equipment by an authorized service center or dealer. A
professional fitting and connection are the requirement for further warranty
and perfect sound.
Mechanical Installation Hints
Warning: First disconnect negative pole of your car battery. Check polarity-
changing polarity may cause serious damage to your car electric. Best speaker
positions are the original build-in positions. Easy installation and
originality are the reasons. Please note that the speakers are flat and
stable. The quality of the installation decides the sound very much,
therefore, attention should be paid to insulation and care during
installation. Please note that the speakers are protected from heat, sunlight,
mechanical influences, moisture and wetness by accessories from AUDIO SYSTEM.
Attention: Lay all cables as straight as possible without squashing or laying
them over sharp edges. Otherwise, this can cause a short circuit or damage to
your whole installation.
Attention: Be careful removing original plastic parts of your car. The fitting
parts could be damaged and must be replaced.
Important: The right polarity of all speakers is extremely important for the
sound of your car audio system. We recommend changing the polarity of the
subwoofer finding out the best possible sound. The best is to listen or
measure it with.
Safety Tips
WARNING: Fasten the SUBFRAME securely in the vehicle with the SUBFRAME
MOUNTING KIT supplied!
ATTENTION: Please read this manual carefully and follow the instructions
Specifications
SUBFRAME M10-2 EVO
- Bassreflex/Vented Box mit/with 2x M10 EVO
- Leistung/Power: 800/600 Watt
- Impedanz/Impedance: 2 Ohm
- Maße/Size: 580/550mm / 200mm
- Gewicht/Weight: 19,4 Kg
- Gehäuse-Volumen/Volume: 30 Liter
Connection (ACTIVE)
Attention: For ACTIVE version please read the manual of the M400.1 MD or CO-220.1 amplifiers carefully and follow the instructions
Connection (not ACTIVE)
If you are using a separate amplifier, connect it to the existing terminal. Please note the polarity.
Package Content
- SUBFRAME MOUNTING KIT
- ACTIVE: M-400.1 MD or CO-220.1 including cable set
- Manual
Optional Mounting Accessories
- ALUBUTYL 1500, 2000 EVO, 3000 EVO, ALU 250 EVO
- Damping: DOORKIT 1.0 and DOORKIT 2.0
- Z-(T)SC 0.75, 1.5, 2.5, 4.0 OFC-Speaker-Cable
- MBR165 / MBR 200 Splash Protection Rings
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>