Zhongshan Sunka Lighting Technology SK20220001 LED Smart Ceiling Lamp User Manual
- June 5, 2024
- Zhongshan Sunka Lighting Technology
Table of Contents
Zhongshan Sunka Lighting Technology SK20220001 LED Smart Ceiling Lamp
Installation
- Package List:
- Lamp body
- Accessories Kits
- Remove the mounting bracket from the lamp according to the direction shown in the figure
- Drill the bottom hole for the expansion rubber plug at the position of the pre-installation surface, and drive the expansion rubber plug into the bottom hole
- Fasten the mounting bracket with screws
- Connect the lamp power cord to the power input cord
- Hold the lamp with both hands, and push it into the fixed mounting bracket
APP User
-
Search for “Smart Life” in Apple’s App Store and other major app stores or scan the following QR code to download the Smart Life app.
-
After installing the APP (the first time you use the APP, you need to complete the registration), turn on the WIFI and Bluetooth functions of your mobile phone..Note: The lighting distribution network must be 2.4G WIFI, not suitable for 5G WIFI
-
Open the Smart Life APP to automatically add devices. When using the “Auto Add” feature, you need to allow the APP to enable WIFI and Bluetooth permissions.
If the WIFI permission is not enabled, the WIFI device cannot be searched; If the Bluetooth permission is not enabled, the nearby Bluetooth devices cannot be searched. -
For the first time, power on the ceiling lamp, if the light is cool white and in a breathing and flashing state, it means entering the APP pairing mode;
If the light cool white and always on, the lamp needs to be re-open the APP pairing mode. Please turn the switch on and off 3 times (on-off-on-off-on-off- on) to reset the device. Enter the WIFI password, and the network can be successfully configured. When the APP pairing mode is successful, the light will change to warm white.
(NOTE: 1. During use, if you want to unbind the lamps, you can delete the device in the APP; 2. If it is not connected to the network, the lamp will re-enter the APP pairing mode when it is powered on every time.) -
Memory Function: If you turn on the smart lamp again by remote control, wall switch or APP, it can activate the last used color and brightness setting when you turn it on.
( Please note: To activate the Memory Function, the color and brightness setting of the lamp must keep 5 seconds at least.) -
You can find the lamp name “SMART-CEILING LAMP” in APP
-
Add Device
-
Add SMART- CEILING LAMP
-
Main interface: ON/OFF
-
White Light Adjustment Interface:
brightness adjustment, color temperature adjustment -
RGB Light Adjustment
Interface: brightness adjustment, color adjustment, color rendering adjustment -
Multiple Scene Switching:
Night、Read、Working、 Leisure、Soft、Colorful、 Dazzling、Gorgeous
-
Custom Mode: scene name, color, flash mode, flash speed
-
Timer Setting
-
Plan Schedule Rhythms Power-on behavior
-
Custom Schedule: sleeping time, wake up time
-
Sleep Mode
-
Wake Mode
-
Rhythms: Customize lamp’s brightness and color based on your biorhythm timing
-
Power Memory: Mainly suitable for areas with frequent power outages
-
Settings: Third-party Control Share Device Create Group
-
Binding an Amazon account, you can control the lights through Alexa voice
-
Binding a Google account, you can control the light through Assistant voice
-
Share Device: Share device to family, devices in the same group can be controlled together
Bluetooth Remote Control Function Description
- OFF
- Brighten
- RED Color Light
- Warm White
- Nature White
- Dynamic Mode 1
- Dynamic Mode 2
- Purple Color Light
- Orange Color Light
- Timing: 1 hour
- Timing: 2 hour
[](https://manuals.plus/wp-content/uploads/2022/07/Zhongshan-Sunka-
Lighting-Technology-SK20220001-LED-Smart-Ceiling-Lamp-FIG-14.png)
- Unpairing
- ON
- Pairing
- Dimmed
- Blue Color Light
- Green Color Light
- Cool White
- Dynamic Mode 3
- Dynamic Mode 4
- Coral red
- Teal green
- Timing: 4 hour
- Timing: 8 hour
Pairing settings of the bluetooth remote control
- During the APP pairing mode, the lamp cannot enter the pairing state with the Bluetooth remote control.
- When the APP pairing mode exits or succeeds, it will immediately enter the pairing state with the Bluetooth remote control, and the timeout will be 15 seconds.
- When the lamp is in the pairing state with the Bluetooth remote control, long press the “Pairing” button of the Bluetooth remote control for 3 seconds, and the pairing is successful.
- Successful pairing light effect: cool white light flashes 5 times.
- “Unpairing” Button: long press for 3 seconds to unbind the Bluetooth remote control from the lamp
FCC WARNING
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>