AIIY STICK-NA Atrim Stick User Manual
- June 5, 2024
- AIIY
Table of Contents
AIIY STICK-NA Atrim Stick
Description & Features
The Z-Stick Mini exposes the well-documented and proven Z-Wave Serial API via
USB. It allows the host processor to control Z-Wave, Z-Wave Plus and Z-wave LR
devices through the Z-Wave protocol. With the developer PC application
software, PC Controller, or any software compliant with Z-Wave Serial API, the
host is empowered to communicate with various Z-Wave devices through the
Z-Wave Command Classes, making your computer the heart of your Z-Wave network.
Z-Stick Mini easily enables you to create your own Z-Wave gateway that is
locally or remotely hosted with a PC or single- board computers, such as
Beagle Bone Black and Raspberry Pi.
Product Specifications
General Specifications
Potocal
- USB Powered
- RF Transmit current
- RF Receive current
- RF Transmit Power
- RF Sensitivity
- 9.6 kbps
- 40 kbps
- 100 kbps
- Operating Temperature
- Internal antenna Sleep Current
- Range
ERF32ZG14 Zen Gecko SoC
Z-Wave Library
- 5.00 ± 0.25 V
- 22 mA (typ.)
- 20 mA (typ.)
- Up to +13 dBm (max.)
- 101 dBm (typ.)
- 100 dBm (typ.)
- 97 dBm (typ.)
- -20 to 75˚C
- Metal spiral antenna
- < 25 µA
- 100 m open space line-of-sight
ERF32ZG23 Zen Gecko SoC
Z-Wave Library
- 5.00 ± 0.25 V
- 12 mA (typ.)
- 10 mA (typ.)
- Up to +14 dBm (max.)
- 109.3 dBm (typ.)
- 109.7 dBm (typ.)
- 108.1 dBm (typ.)
Z-Wave Libraries
- Bridge Controller
- Z/IP Application
Block Diagram
ERF32ZG14 Zen Gecko SoC
ERF32ZG23 Zen Gecko SoC
Quick Start Up
Here is a Quick Start Up guide to get Z-stick Mini to work with the Z-Wave PC
Controller. The Z-Wave PC Controller is a PC application software tool that
enables communications with Z-Wave nodes, such as switches and sensors.
Connect Z-stick Mini to your computer.
Install the Virtual COM Port (VCP) drivers and CP210x VCP Drivers, if required
by your Operating System. The latest drivers are available at
http://www.silabs.com/interface-software. Note: The driver is WHQL
certified. No installation is required for Window OS.
Note: The driver is WHQL certified. No installation is required for Window OS.
- Install and Run the Z-Wave PC Controller from Simplicity Studio.
- Click on the “Setting-wheel” in the Right-Top corner of the PC Controller and select “Silicon Labs CP210x USB to UART Bridge”. Click OK.
- Click on Network Management.
- Z-Stick Mini is detected and appears as [S2] Pc Controller. The bottom panel displays that the Z-Wave Command Class is supported by Z-Stick Mini.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>