havit SK802BT Portable Wireless Outdoor Speaker Instruction Manual

havit SK802BT Portable Wireless Outdoor Speaker

Packing list:

Product structure:

1. Mode switching
2. PREVIOUS/VOL-
3. NEXT/VOL+
4. Multi-function button(MFB)
5. Power switch
6. LED indicator
7. Micro charging port
8. AUX in
9. USB slot
10. Micro SD card slot

Power ON/OFF

1.  Tum the power switch to “on'”, the LED indicator lights up blue for 3s.
2.  Tun the power switch to “off”‘.

Bluetooth connection

1. Turn on the Bluetooth speaker, the LED indicator flashes blue continuously while waiting for paring.
2. Then active the Bluetooth of your phone and search for “HAVIT SK802BT”. Click manually to connect. If the connection is successful, the LED indicator will turn steady blue.
3.  Since the speaker can automatically reconnect to the last paired device. When the Bluetooth of your device turns on, (Just turn on the speaker), it will automatically reconnect.

Answer incoming calls

Press the MFB button to answer incoming calls.
Tip: Since some mobile phones default to answer calls via their own receiver, please refer to the instructions of your phone and set on your phone.

End the call
Press the MFB button once to end the current call.

Refuse incoming calls
Long press the MFB button for 2s to reject when there comes a call.

Last number redial
Dual press the MFB button to redial the last calling number.

Mode switching
Short press M to select mode. (Bluetooth/Micro SD card/AUX in/USB/FM)

Micro SD card mode
Insert a micro SD card, the speaker will automatically recognize (with a voice prompt) and automatically broadcasts music in it. (The Max storage of the micro SD card is 32GB).

AUX mode
Connecting your music player/phone to the speaker via the provided dual 3.5mm audio cable, then the speaker will automatically recognize.

USB mode

Insert a USB disk,the speaker will automatically recognize (with a voice prompt) and automatically broadcasts music in it.

FM mode

1.  Insert the provided micro USB cable to the speaker micro USB slot as an antenna. Then turn on the speaker and press MFB once to enter FM mode.
2. Long press the Play/Pause for 2s to activate auto searching for channels.
3.  Long press play/pause 2 seconds to stop the search
4. Long press the “+” “-“to select channel.

Music playing

1.  Short press the MFB to pause/play;
2.  Long press the for PREV;
3.  Long press the “+”for NEXT.
4.  Short press the”-“for VOL – ;
5.  Short press the”+”for VOL+.

True Wireless Stereo (TWS) Fit for two  SK802BT speakers

You can connect two SK802BT Speakers as a pair for stronger stereo and surrounding effect.

1.  Make sure the Bluetooth function is OFF on your Bluetooth player,
2.  Turn on two speakers;
3.  Long press M button on either speaker for 2 seconds, then there comes up a melody which means the two speakers are now in TWS pairing status. Until LED of the ight channel speaker lights up steady blue and the LED of the left channel speaker flashes, the TWS connection is successful.
4.  Then active the Bluetooth of your phone and search for “HAVIT SK802BT”. Click manually to connect. The two speaker LED turns to be steady blue if the connection is successful.
5. The function of TVWS must be matched before connecting to the mobile devices. Otherwise, the function of TWS cannot be matched after connecting to mobile devices.

Charging

1. As product has built-in non-removable and rechargeable battery, please use the provided micro USB cable to charge.
2. Charging voltage and current is 5V/MA, PLS charge the speaker ith the input power below 5V/1A.
3.  Please choose the charger that is certified by the regular manufacturer
4.  The battery performance may decrease as repeating charging and using the speaker, It’s a normal phenomenon for all rechargeablebatteries. +.Charge if the power LED indicator lights up red, and it goes off upon charging finished.

Specification:

• Bluetooth version: V5.0
• Output power:5W*2
• Battery: 1800 mAh
• Playing Time: 8H
• Charging time: 2-3H
• size: 23080100mm
• Wireless working range:10M
• Speaker: 57mm
• SNR:280dB
• Frequency Response:20Hz-20KHz
• Input voltage: DC 5V /1A
• Support: BT, TF, USB, FM, AUX, TWS
• Material: ABS

Warnings

1.  Please follow the instruction to operate.
2.  PLS charge the product with input power below 5V/2.4A, in order to protect the battery
3.  Please do not use this product in the near water. Do not immerse this product in any liquid or splash any liquid on this product.
4.  Please store or use the product in a normal temperature environment.
5.  Please keep the product from heat source, such as radiators, hot air regulators, stoves, or other heat generating instruments. As it is not anti-high temperature.
6.  Don’t jam the ports of the product, such as charger port, LED port and microphone etc..
7.  In order to protect your hearing and extend the speaker service life, it is not recommended to adjust the volume to the maximum level for a long time.
8.  If the speaker system halted, long press the MFB to reset and power off.
9.  Whatever reasons damage the product, please feel free to contact our after-sales staff in time rather than repair by yourself. Otherwise, you will accept without after-sales service.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a paticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>