Galaxy Communications FSTV-3222P 32-Inch LED TV DVD Combo User Manual
- June 5, 2024
- Galaxy Communications
Table of Contents
- Safety Information
- Important Safety Precaution
- TV Specifications
- Accessories
- Main Unit
- Overview of the back panel
- Remote Control Unit
- General Description
- External Connection
- BOOT WIZARD
- Menu Operation
- Home
- Media Menu Operations
- Troubleshooting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
32″ LED TV DVD COMBO
Model: FSTV-3222
USER’S MANUAL
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A
polarized plug has two blades one wider than the other. A grounding plug has
two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-
over
Unplug the apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as a power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus
have been exposed to rain or moisture, do not operate normally, or have been
dropped.
CAUTION: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to do so.
WARNING： To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping
or splashing and objects filled with liquids, such as vases, shall not be
placed on the apparatus.
WARNING: The mains plug is used as a disconnect device, the disconnect
device shall remain readily operable
– This lightning flash with an arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of non-insulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
– Warning: To reduce the risk of electric shock, do not remove the cover
(or back) as there are no user-serviceable parts inside. Refer servicing to
qualified personnel.
– The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance instructions
in the literature accompanying the appliance.
Apparatus with class I construction shall be connected to a socket outlet with
a protective connection
Important Safety Precaution
Please, immediately pull out the DC power plug from the adapter if there is an
abnormal sound or smell or the LED TV has sound but no picture, and contact
after-sales support.
The LED TV should be kept from high-temperature heating sources or direct sunlight. Good ventilation is required. Allow 10 cm. between the LED TV and other appliances or built-in cabinet walls
Do not wipe the LED TV with any petrol, chemical, or alcohol-based solvents as it will lead to product damage of the panel and cabinet
| 
---|---
The LED TV should be kept free from rain, moisture, and dust to prevent electrical shock and short circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers, etc.
When you wipe the front cabinet, please make sure the power plug is pulled out use a soft, dry, lint-free cloth and handle it with care. Do not repeatedly wipe the panel, nor crape, tap, or strike the panel with a hard object
When the television receiver is
not used for an extended period of time, it is advisable to disconnect the DC
power cord from the DC outlet
Do not place the power cord or other cables across a walkway in case it is trampled on. Do not overload the power cord or power socket. When the power plug is used to disconnect and connect the device, it should easily go into the power source
The TV set should not be subjected to water droplets, vapor, or splash. This equipment should not be placed on objects filled with liquids. Do not place flame sources, such as lit candles, on or near the LED TV. Please, pull out the power plug and contact after-sales support if there are abnormal objects or water in the TV. Do not place the LED TV on an unstable surface.
Do not disassemble the back cover, as it contains high voltages inside and will cause electric shock. Only qualified professionals should conduct internal adjustments, maintenance, and checks Pull out the power cord and antenna cable during electrical storms so the LED TV is not damaged by electrical surges. Keep all people away from the antenna cable during electrical storms
TV Specifications
| Display screen type | Color LED display |
|---|---|
| Model | FSTV-3222P |
| The maximum resolution | 1920X1080 |
| Power supply | DC 12V=6A |
| TV system | NTSC System, ATSC System |
| Frequency range | Antenna: 2-69; Cable: 1-135 (Analog: 1-125, Digital: 1-135) |
| Video input Format | PAL/NTSC |
| Antenna input | antenna socket 750 |
| Average Power Consumption | 50W |
| Dimensions (LXWXH) | 28.8 x 7.5 x 18.9 inch |
| Weight (Net weight) | 4.2 Kg |
| Operation environment temperature | 0°C-35°C |
Remarks:
The above-listed specifications and data are subject to change without prior
notice
Accessories
Please make sure the following items are included with your LED TV.
If any items are missing, contact your dealer
Main Unit
1. SPEAKER
2. POWER INDICATOR
Green: In power on mode.
Red: In standby mode.
3. REMOTE CONTROL SENSOR
4. MENU
Press to see an on-screen menu of your TV’s features.
5. SOURCE
Toggles between all the available input
TV’s features.| 6. CH+/-
Press to change channels.
In the on-screen menu, use the CH +/ buttons as up/down arrow
buttons.
PLAY
Play/stop DVD (in DVD mode).
EJECT
Eject DVD.
7. VOL+/-
Press to increase or decrease the volume.
In the on-screen menu, use the VOL +/ buttons as left/right arrow buttons.
8. POWER /
Press the POWER button to toggle between normal and standby mode.
---|---
Overview of the back panel
Note: The product and illustrations in this user’s manual are only for explanation purposes and may vary depending on the model.
Assembling Stand Process
Instruction:
- Place the TV unit on a flat and clean table.
- Fix stand by 2 pcs screws via screw holes B and A.
- Fix stand by 2 pcs screws via screw holes D and C.
Remote Control Unit
-
POWER: Turn the TV on and off.
-
INPUT: This button is used to switch among different sources, Select a source and press ENTER button to confirm.
-
Digital Buttons(0-9, •) : Directly select channels with digital buttons.
-
RECALL: Switch to the previous program.
-
YouTube: If the network is available, press this key to View YouTube directly.
-
CC/SUBTITLE: In DTV mode, press this button to switch Close Caption on/off. In ATV mode, press this button to switch to Close Caption type. In USB mode, press
this button to switch subtitles when the movie is playing.
-
HOME: Press it to go to the App home page.
-
NETFLIX: If the network is available, press this key to view NETFLIX directly.
-
Q.MENU: Press this key to go to the quick menu.
-
MENU: Display the main menu or exit the current menu.
-
ENTER/ LIST: Validation key.
Press it to show the channel list and favorite list on the screen -
Arrow buttons ◄►▲▼: Use to select on-screen menu items and change menu values.
-
BACK: Return.
-
EXIT: Exit the menu.
-
COLOR BUTTONS: Used in the EPG or Program Edit menu.
ANGLE: DVD ANGLE setup.
LANGUAGE: DVD audio language setup.
D.MENU: Quick navigation during Teletext or setup settings / DVD: Video DVD Menu button.
SETUP: DVD system setup.
D.DISP: Quick navigation during Teletext or setup settings / DVD: DVD Information button. -
VOL+/-: Press these buttons to adjust the volume.
-
MUTE: Press this button to shut off the sound of the TV set temporarily, press again to resume.
-
MTS/AUDIO : In USB mode, press this button to switch the audio track when the movie is playing. In TV mode, press this button to switch to MTS or Audio Language.
TV/DVD: Press this key to go to quick TV, Press again this key to go to quick DVD.
A-B: Press the A-B button once to set point A. Press the A-B button a second time to set point B. After setting the program repeat playing from A to B. Pressing the A-B button a third time will cancel the repeat. -
CH▲/▼: Press these buttons to change the channel upward or downward.
-
DIGITAL MEDIA PLAYER CONTROL BUTTON: Include play/pause, stop, previous, next, backward, and forward used in USB mode. No record function. Please refer to the relevant instructions in the section for multimedia players.
-
INFO: Display the program information.
-
DVD TITLE: Press this button to return to the title of the disc.
-
PRIME VIDEO : If the network is available, press this to open and view amazon prime video directly.
-
PANDORA: Press PANDORA key to enter the PANDORA application.
-
: Open/close in DVD mode.
General Description
Installing Batteries in the Remote Control
Installing Batteries
1 Open the battery compartment cover on the backside. 2 Insert two 1.5V AAA
size batteries in correct polarity. Don´t mix old or used batteries with new
ones.
3 Closed the cover.
- Point the remote towards the remote control sensor of the wireless TV and use it within 7 meters.
- Put the used batteries into the recycling bin since they can negatively affect the environment
Note:
- One loading of batteries will last for 1 year under normal use
- If you do not intend to use the remote controller for a long period of time, remove them to avoid damage due to leakage.
- Do not use old and new batteries together.
- The battery (battery or battery or battery pack) should not be exposed to excessive heat such as sunshine, fire, or the like.
External Connection
Antenna connection
The antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable
can be connected to the antenna jack directly, if the antenna cable is a
300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter
to connect the antenna cable to the antenna jack. For details please refer to
the following drawing. Suitable mobile antennas are available from Free Signal
TV.
BOOT WIZARD
The Startup Wizard menu contains language settings and network settings.
Language settings, you can set the TV operating language; network settings,
you can set according to the connection, wireless network settings WIFI
connection, a wired connection is to set the local area network.
Menu Operation
HOME
Press the “HOME” button menu, Up and down direction buttons can be used for
selections, Press the left or right button to select the corresponding input
source, and press
The Enter button to enter.
Press the “menu” button to display the menu, press the up and down keys to select the appropriate settings, and press the right button to enter the relevant settings.
Picture Mode
Use the menu button to call up the menu, then right-click to select the “Image
Mode” option, and press the left and right buttons to switch the image mode to
Movie / Sport / Vivid / Brighter / Standard.
Backlight
Adjust the backlight brightness value to change the backlight brightness.
Color temperature
Select the “Color Temperature” option according to the method mentioned above,
and then use the left and right keys to adjust the color temperature to cool
/normal/warm.
Aspect Ratio
You can select 4:3, 16:9, Movie, or Subtitle.
Noise Reduction
Press the up/down key to select the “Noise Reduction” option. Press the
left/right key to select “Off”, “Low”, “Medium”, “High” and “Auto” to improve
the picture sharpness.
Press the “menu” button to display the menu, and press the up and down keys to
select the appropriate settings, press the right button to enter the relevant
settings.
Sound mode
Use the up and down keys to select the sound menu, then press the right button
to select the “Sound Mode” option, and press the left and right buttons to
switch the sound
mode to User/Standard/Vivid/Sports/Movie/Music/News.
Balance
If the volumes of the left speaker and the right speaker are not the same, you
can adjust the “Balance” to suit your personal preference.
Auto Volume Limit
Press the ENTER function on or off.
Surround Sound
Press the ENTER function on or off.
Dolby Audio Process
Press the ENTER function on or off.
Dialogue Enhancement
press the left and right buttons to switch to Off/Low/Medium/High.
Digital Output Mode
This is used to convert the digital output mode. There are Auto, PCM, Trans-
code Dolby Digital, and Trans-code Dolby Digital Plus options.
Audio Type
This is used to convert the audio output mode. There are Normal, Hearing
Impaired, and Audio Description options.
Audio Delay
Press the right button to enter the relevant settings.
Press the “menu” button to display the menu, press the up and down keys to
select the appropriate settings, and press the right button to enter the
relevant settings.
Language
Select Audio Language Setting to enter the audio selection list, to choose
Dolby and other sound effects. Audio Language can switch the first audio
language through the left and right direction keys, the default is English.
Second Audio Language can switch the second audio language through the left
and right direction keys, the default is English.
OSD Time
Press the “menu display time” option, through the up and down direction keys.
Link Setup
Press the ENTER function on or off.
Time
Press the ENTER function on or off.
Bluetooth
Press the “ENTER” Key to enter, and through the up and down direction keys,
can be selected.
Close Caption
Press the ENTER function on or off.
TTS
Press the ENTER function on or off.
TV Mode
Press the “ENTER” Key enter, and the up and down direction keys can be
selected.
Reset
Press left and right keys to choose to confirm or cancel, or select to confirm
the television will restart, The menu will restore the initial data, or choose
to cancel, or back to the menu interface.
Press the “menu” button to display the menu, press the up and down keys to
select the appropriate settings, and press the right button to enter the
relevant settings.
Choose the option to Lock the System with the up and down keys. Then open the
lock function with left and right keys. Please remember that the initial
password is 0000. If you want to adjust the password, you first should select
the option to set the password and then input the old password, and new
password. When a new password is an input again and correct, make sure the
above operation successfully resets the password. When you want to shield some
programs you don’t like, please select the option to block the program and
input the channel number.
Press the “menu” button to display the menu, press the up and down keys to
select the appropriate settings, and press the right button to enter the
relevant settings.
Tuner Mode
Press the “ENTER” Key, and use the up and down direction keys to select.
Auto Tuning
Press the “ENTER” Key, and use the up and down direction keys to select.
DTV Manual Tuning
ATV Manual Tuning
To simulate manual search, select the Channel you need to store. Press the up
and down keys to select the “Search” option, press the left and right buttons
to search, and you can modify the frequency by fine-tuning, and choosing the
best frequency.
Press the “menu” button to display the menu, press the up and down keys to
select the appropriate settings, and press the right button to enter the
relevant settings.
Enter the “Network” menu item “Wi-Fi”, to open or close the Wi-Fi connection
function, There are 4 types of connection: select and enter the password in
the list of connections, use a without-password protected connection, or
manually add a name to connect, plus point-to-point direct connection. For an
Ethernet connection, insert the network cable into the network cable
interface, and after identifying the network, the current ipv4 and ipv6
addresses will be displayed. Select Proxy Settings to set the proxy. IP
settings can be set the same way to get the IP address. There are automatic
acquisition or static IP address options.
Press the “menu” button to display the menu, and press the up and down keys to
select the appropriate settings, press the right button to enter the relevant
settings
You can view and set the relevant information for the OTA update. You can also view the model, Android version, and version number information.
Home
Press the “HOME” button menu. The up and down direction keys can be selected,
or Press the left or right button to select the corresponding input source and
press the Enter button to enter.
(The main page is designed with Zen UI, divided into the latest news, Featured
apps, applications, music, and sports.)
*Different regions will receive different content
Media Menu Operations
HOME
Press the “HOME” button menu. The up and down direction keys can be selected,
or Press the left or right button to select the corresponding input source and
press the Enter button to enter.
Music
Use the up and down keys to select the “Audio” icon, press the confirmation
button to confirm, and then press right to the folder, press the confirmation
button to open the appropriate folder.
After selecting the Audio, press the confirmation button to open the Audio.
Choices are available through the left and right buttons.
Video
Use the up and down buttons to select the “Video” icon, press the confirmation
button to confirm, and then press right to the folder, press the confirmation
button to open the appropriate folder. After selecting the Video, press the
confirmation button to open the Video, Choices are available through the left
and right buttons.
Photo
Through the up and down buttons select the “Photo” icon, press the
confirmation key to confirm, then press right to the folder, and press the
confirmation key to open the corresponding folder. After the selection of the
Photo, press the confirmation button to open the Photo, Choices are available
through the left and right buttons.
DVD
HOME
Press the “HOME” button menu. The up and down direction keys can be selected,
or Press the left or right button to select the DVD and press the Enter button
to enter.
Press the DVD SETUP button to enter that function.
TV SYSTEM
Set the options: NTSC/PAL/AUTO.
POWER RESUME
Press the ENTER function on or off.
TV TYPE
Set the screen ratio options: PS(4:3 Pan Scan), Normal/PS(4:3 Letter Box), and
Wide (16:9)the default setting is wide.
PASSWORD
Enter “0000” to enter.
RATING
Disc Options.
DEFAULT
This option will return the DVD to its factory default settings.
OSD LANGUAGE
Set the OSD Language options.
AUDIO LANG
DVD language selection options.
SUBTITLE LANG
This player can display DVD subtitle languages if supported by the DVD disc.
When playing DVD you can hide the subtitle or choose any of them as the
current subtitle language.
MENU LANG
Set the MENU Language options.
AUDIO OUT
Press the “ENTER” Key. The up and down direction keys can be used for
selection.
KEY
Press the “ENTER” Key. The up and down direction keys can be used for
selection.
DUAL MONO
Press the “ENTER” Key. The up and down direction keys can be used for
selection.
Troubleshooting
| Problem | Possible cause | Possible Solution |
|---|---|---|
| No picture and sound. | • The power adaptor is not plugged in or not working. |
• The wrong input source is selected.
• The input source has failed to connect with the TV or is not turned on.| •
Plug the power adaptor into a suitable outlet. Try both the 12/24V & 240V
adaptors
• Select the correct input source.
• Make sure the input source is correctly connected and turned on.
No sound.| • The volume control is set to a minimum.
• The mute button on the remote control has been pressed
• An incorrect sound system mode is set.| • Press the button to increase the
volume.
• Press or the (or ) button to restore/increase the volume.
• Set a correct sound system mode from the main menu to match your TV source.
No picture, or monochrome picture only.| • The color system setting does not
match the program.
• The sound system setting does not match the program.| • Select the
appropriate color system setting.
• Select the appropriate sound system setting. (If unsure, use Auto settings
where available).
Sound or picture interference.| • Some equipment that causes interference is
close to the TV.
More than one device is plugged into the same power outlet.
• An incorrect sound system mode is set.| • Keep interference-causing
equipment away from the TV.
• Plug the power adaptor into another, separate power outlet.=
• Set a correct sound system mode from the main menu to match your TV source.
DTV Picture Pixelation| • Poor Signal| • Adjust the position or orientation of
the TV antenna.
• Check the antenna connection from the wall plate to the TV.
• Try re-tuning the channels as the channel frequencies may be different in
some areas.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Questions? Comments? Assistance?
Please contact us!
Sales@FreeSignal.TV
PH: 859-250-9538
1512-D Resource Drive
Burlington, KY 41091
www.FreeSignal.TV
THE LEADER IN ADVANCED ENTERTAINMENT
SOLUTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>