boAt Airdopes 413 ANC Noise Cancelling Earbuds User Manual

boAt Airdopes 413 ANC Noise Cancelling Earbuds

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 413ANC

Please consider this manual as your guiding map toward the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend a thorough reading of this manual; also, you may refer to the same at times when you face any sort of difficulty in the future.

Package Contains

• 1N Airdopes 413ANC
• 2N Extra Earmuffs
• 1N Type cable
• IN User Manual
• 1N Warranty Card
• 1N Catalogue
• 1N Read Me Card
• 1N FAQCard

Power On (First Time User)

• Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Our IWp (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected, and enter into the connection mode

OR

• Long touch the CTC (Capacitive Touch Control) on both earbuds for 2 seconds to manually power on the earbuds, indicated by blue LED flash for a second.

Step 2: Both the earbuds automatically pair with each other and enter the Connection Mode.

Connection Mode

• Step 3: Turn on the Bluetooth functionality on your phone/media device and scan
• Step 4: Search for ‘Airdopes 413ANC’ and pair accordingly.

Congratulations! Your earbuds are successfully connected via Bluetooth and indicated by slow blue LED flashes on the master (right) earbud and solid blue LED on the left earbud.

Note

• Pairing mode lasts for 5 minutes If the pairing time gets missed, then you need to reconnect the earbuds andd follow the above-mentioned procedure
• Airdrops 413ANC remembers previously connected devices, once Switched on, the earbuds automatically reconnect to the previously connected devices
• When the right earbud is being kept inside the case and the left earbud is kept outside the left earbud performs as the master earbud

Single Earbud Usage

• Step 1: Please note that both the earbuds can be used in mono mode. Use Smart Power On or Manual Power On for switching on the desired earbud
• Step 2: The selected earbud automatically enters the connection mode
• Step 3: Turn on Bluetooth on your phone/media device and search for Airdopes 413ANC’ to connect

Note: To switch to Stereo mode, simply take out the other earbud from the case It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.

Quick Glance on Functionalities

• Triple Tap: Triple tap the CTC on either earbud to activate the voice assistant
• 2 Seconds: Long touch both CTCs for 2 seconds to manually power on (blue LED flash)
• 10 Seconds: Long touch both CTCs for 10 seconds to manually power off (blue LED flash)
• 6 Seconds: Long touch both CTCS when earbuds inside the case to perform a factory reset (red LED flashes thrice)

Charging the Earbuds

• Step: Please insert the earbuds back inside the charging case in the correct orientation.

Remaining Battery Indication

• When earbuds get kept inside the case, during that brief period the case LED indicates the remaining battery for the earbuds

Note: Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the io of the charging case closed while charging.

Charging the Case

• Step: To charge the case. plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ power bank, etc.

Case LED States (charging mode)

Case LED States (non-charging mode)

• When earbuds are outside the case and the case lid gets opened:

Basic Functions

• Active Noise Cancellation (ANC) Mode: In Ambient mode long touch either CTC for 2 seconds to activate ANC mode
• Ambient mode: In Normal mode, long touch either ctc for 2 seconds to the active ambient mode for transparency towards your audible surroundings. long touch on either CTC for 2 seconds in ANC mode, it will trigger to
• Normal mode: Ambient mode is the default mode for 413 ANC
• Voice Assistant: Triple tap the CTC on either earbud to activate the default smart voice assistant
• Answer Call: Double tap the CTC on either earbud to answer incoming calls
• Hang Up Call: Double tap the CTC on either earbud to end ongoing calls
• Reject Call: Long touch the CTC on either earbud for 2 seconds to reject incoming calls
• Play/Pause Music: Double tap the CTC on either earbud
• Volume Up: Single tap the CTC on the right earbud in steps to increase the volume
• Volume Down: Single tap the CTC on the left earbud in steps to decrease the volume

Voice Assistant

• Step 1: Triple tap the CTC on either earbud to activate the voice assistant
• Step 2: The respective voice assistant screen pops up and you may place your commands at ease

Tips: You may try out the following commands.

What is the weather like?

• Play a song
• Set a reminder

Smart Power Off

• Step 1: After usage, remove both the earbuds from your ears
• Step 2: Place the earbuds back into the charging case in the correct orientation and close the lid
• Step 3: The earbuds will automatically switch off (and enter charging mode)

Manual Power Off

• Step 1: Long touch both CTCs for 10 seconds to manually power off the earbuds
• Step 2: Once the earbuds get turned off. place them back inside the case and close the lid

Factory Reset

• Perform the Factory Reset in case you face any difficulty while operating your Airdopes 413ANC

NOTE: Before performing reset, clear “Airdopes 413ANC from pairing device history by forgetting device

• Step 1: Place the earbuds inside the case.
• Step 2: While the earbuds are inside the case, long touch both CTCs for 6 seconds until the charging case LED blinks thrice in red colour
• Step 3: Close the lid and then re-open
• Step 4: Perform a fresh connection attempt again and enjoy!

Congratulations! Your Airdopes 413ANC has been Reset

Troubleshooting

Specifications

Warning

• Please follow the instructions to operate
• Please don’t use the ear-buds in extreme temperatures
• Please don’t use the product near water
• Please keep the product away from heat sources, as the heat may damage it
• Don’t jam the ports such as the charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds service life

Advisable: The earbuds may start at 100% volume and they may need to be reduced when they are switched on at first. This can be done by using the touch gesture volume control on the earbuds.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>