NorStone SB-631 Rotative Wall Mount for Sonos One Instruction Manual
- June 5, 2024
- Norstone
Table of Contents
NorStone SB-631 Rotative Wall Mount for Sonos One
Read the entire instructions manual before you start installation and
assembly. If you have any questions regarding any of the instructions or
warnings, please contact your local distributor for assitance
CAUTION:
- Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT:
Ensure that you have received all parts according to the component checklist
prior to installation. If any parts are missing or faulty, contact your place
of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular
intervals (at least every three months).
PARTS
ASSEMBLING
Note: Position the Top Plate (B) slightly slant above the bracket for the holes to line up properly. Then insert and tighten the screw using a Phillips screwdriver.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>