MARQUANT 943-111 Digital Thermometer Clear Display Instruction Manual

June 5, 2024
MARQUANT

MARQUANT 943-111 Digital Thermometer Clear Display

MARQUANT-943-111-Digital-Thermometer-Clear-Display-

TECHNICAL DATA

  • Thermometer & clock
  • Manual setting of clock
  •  12/24 hour display
  • Temperature display in °C or °F.
  • Thermometer Measurement range indoors: 0 to 50°C- measurement range outdoors: -40 to 70°C
  • Display of actual temperature and highest/lowest temperature
  • Battery: 2 x AAA batteries, LR03 (not included).

DESCRIPTION

  1. Display of outdoor temperature in °C or °F
  2. Display of the temperature trend
  3. Display of indoor temperature in °C or °F
  4. 12/24 hour display
  5. Frost warning
  6. Display of highest and lowest temperature in °C or °F
  7. Time

USE

Read the User Instructions carefully before use.  Before using for the first time

  • Open the battery compartment on the back and insert the batteries with the correct polarity. Replace the battery cover.
  • When the batteries are inserted all the icons on the display go on for 3 seconds and then the time display flashes for 30 seconds. The indoor and outdoor temperature, and the highest and lowest temperature are registered.
Function buttons

MARQUANT-943-111-Digital-Thermometer-Clear-Display-
fig-2

Setting the clock manually
  • Press the SET button for 2 seconds. The display for the hour starts flashing. Presss A or T to set the hour.
  • Press SET to confirm. The display for minutes flashes. Press A or T to set the minutes.
  • Press SET to confirm. The display for 12/24 hour display flashes. Press A or T to set the the 12/24 hour display.
  • Press SET to confirm and exit, and to switch to clock mode.
  • Press 12124 to switch between 12/24 hour display.

Frost warning

  • If the registered temperature is between -3 and 1 °C the icon is shown on the display .

Temperature

  • Press in temperature mode to switch between displaying the indoor and outdoor temperature.
  • Press for 3 seconds to switch between the clock and displaying the highest or lowest temperature.
  • Press for 3 seconds in temperature mode to clear the values for the highest and lowest temperature.

Temperature display in °C/° F

  • The temperature is shown in °C or °F. Switch between different modes with the button.

Temperature trend

  • The unit reads off and shows the actual temperature every 30 seconds.
  • The temperature is compared with the previous measurement and is shown if the temperature
    has risen by 1 °C. is shown if the temperature has dropped by 1 °C. No arrow is shown if the change in temperature is less than 1 °C.

Important information

  • If the temperature reading lies below the measurement range, LL,L is shown on the display. If the temperature reading lies over the measurement range, HH,H is shown on the display.
  • Press RESET to clear all settings and values.
  • Press RESET after replacing the batteries.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals