YOSINT Wireless Earbuds, Bluetooth 5.0 Headphones Complete Features

: June 5, 2024
: YOSINT

Table of Contents

YOSINT

YOSINT

YOSINT Wireless Earbuds, Bluetooth 5.0 Headphones

YOSINT-Wireless-Earbuds-Bluetooth-5.0-Headphones

Specifications

BRAND: YOSINT
EAR PLACEMENT: In Ear
CONNECTIVITY TECHNOLOGY: Wireless
FORM FACTOR: In Ear
HEADPHONES JACK: USB
BLUETOOTH: 5.0
PLAYTIME: 5 hours without charging case
TOTAL PLAYTIME: 30 hours
WATERPROOF: IPX7

Introduction

The wireless Bluetooth earbuds are equipped with the most advanced Bluetooth 5.0 technology, which supports HFP, HSP, A2DP, and AVRCP and offers in-call stereo sound as well as fast and stable transmission. After initial use, they will automatically connect to the most recent device that was previously connected. With a 13-millimeter vibrating diaphragm and HD rendering technology, these wireless earbuds deliver outstanding sound quality with a clear, crisp treble. Enjoy your music even while it’s playing loudly. You can share the earbuds with your friends and family because it supports both mono mode and dual stereo mode. When you open the charging case after the initial connection, these wireless headphones will automatically connect to your device, which is quicker and more practical. You can use either earbud to operate the phone while using it, including to change the music, adjust the level, make calls, activate the voice assistant, etc.

Strong battery allows for up to 5 hours of playback when the headphones are fully charged. Otherwise, the earphones might be recharged six more times using the travel charging pouch. Up to 30 hours of playing are possible overall. Earbuds with a small, cozy design that snugly fit all ear shapes. The use of a sweat- and water-resistant nano-coating allows for easy protection of the earphones during strenuous exercise and in all-weather situations.

HOW TO PAIR

The earbuds should be in pairing mode. Consult the instructions that came with the earphones if you’re unsure how to do it.
Activate Bluetooth on your iOS or Android smartphone.
Select Pair after locating your earbuds in the list of compatible devices.

HOW TO CONNECT BLUETOOTH HEADPHONES TO ANDROID PHONE

Open the settings first.
Tap Connections after that.
Next, tap Bluetooth.
In the top-right corner of your screen, select Scan.
Next, hold down the power button on your headphones for a few seconds.
Find your headphones and tap them at the end.

HOW TO SYNC

Get an earphone splitter and connect it to the aux output of your audio device.
Connect the output jacks of the splitter to the jacks of the two headphones.
Play sound-quality test audio or video file to check the sound.

HOW TO FIX EARPHONES WHEN ONLY ONE SIDE IS WORKING

Make the earphone cord straight.
Attempt a different set of earbuds.
Make the headphone jack clean.
Restart the apparatus.
Check the audio settings on the device.
Examine the earphone cables for damage.

Frequently Asked Questions

How can I tell when the battery in my wireless earbuds is full?

Bluetooth headsets all function differently. However, once your headsets have reached full charge, the earbuds usually start to glow. Red and green lights are most frequently used in headsets. A low battery level is indicated by the red light, while a full charge is indicated by the green light.

Why can’t Bluetooth locate devices?

Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

Why won’t my two earbuds pair?

Your device’s Bluetooth setting should be disabled. Earbuds will automatically turn on when you remove them from the case. To manually sync them, double- press the left and right earbuds at the same time. NOTE: Give it another shot if it doesn’t work the first time.

My wireless earphones won’t connect; why?

If the battery in your headphones is low, they might not be able to pair. Additionally, I’ve discovered that certain Bluetooth headphones stay on when in the case, which causes them to deplete to zero percent more quickly than you would expect. Even if they claim to have some battery left, try plugging them in and giving them a thorough charge before pairing.

Can I charge the case and my earbuds at the same time?

Fortunately, you can charge your case and headphones simultaneously.

Should I always have earbuds on hand?

The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.

Can earphones be charged without a case?

Unfortunately, there is no practical alternative in these situations other than purchasing a replacement case because it is impossible to charge the earphones without a case. Technically, there have already been some third- party products that advertise the ability to charge AirPods without a case.

Why won’t my phone and Bluetooth headphones pair?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

What is the Bluetooth pairing passcode?

When partnering with another Bluetooth® device, use the code 0000. Depending on the Bluetooth device being used, the passcode may display as Pass key, PIN code, PIN number, or Password. The device cannot be paired with another Bluetooth device that employs a different passcode.

Why doesn’t my right earbud work?

Try twisting and taping the cord to restore sound if a single earbud periodically loses sound. If twisting the wire doesn’t work, you might have to open the earbud and, if you can, solder the connection. You might occasionally need to purchase new earbuds.