wilfa BL7S-PB1800 Easily Mix Up Nutritious Smoothie Blender Instruction Manual

: June 4, 2024
: Wilfa

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
PRODUCT OVERVIEW
OPERATION
TROUBLESHOOTING
CLEANING AND MAINTENANCE
GUARANTEE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

wilfa BL7S-PB1800 Easily Mix Up Nutritious Smoothie Blender Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

Read this manual thoroughly before using and save it for future reference.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from themanufacturer or its service agent.
Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Always operate with the lid in place. When processing hot beverages, properly secure the lid and measuring cup to avoid scalding due to spraying of hot liquids.
To prevent spillage, do not fill liquid in the blender jug above the MAX line.
This product is intended for indoor, non-industrial, non-commercial; household use only.

PRODUCT OVERVIEW

Measuring lid
Lid
Jug
Blade holder
Sealing ring
Jug base
Button
Knob
Main unit

**PRODUCT OVERVIEW – DISPLAY

**

Ice crush
Smoothie full jug
Smoothie half jug
Auto clean

OPERATION

BEFORE USE
Clean the unit and parts thoroughly before you use the unit for the first time (see cleaning instructions).

USING THE APPLIANCE

There is a safety switch on the blender. When the jar is not placed correctly or in position, the blender will not work.
Make sure the indicator is set to “0” when you start the blender. The blender will not work unless the indicator is set to “0” before choosing your preferred setting.
Select the desired pre-set by turning the wheel anti-clockwise and press the start button in the middle of the button. The product will run the selected program automatically, after program is completed, the blender will enter standby mode.
Select the speed manually by turning the wheel clockwise.
Start/Pause button: Press the start / pause button to start the selected preset, or to pause the operation while the motor is running.
Manual pulse: Press and hold pulse to use the pulse function. To stop it just release your finger.

USING THE TAMPER
The tamper is to be used for stirring food. Never use the tamper without the lid in place. Remove the filler cap from the lid and slide tamper into the Blender Jar. The tamper has a splash guard located near the top that prevents the tamper from coming in contact with the blade assembly.

PRESET PROGRAMS

Function| Program| Operation cycle
Ice crush| Put ice cubes into the jug, not more than 180g ice, and press start. If the ice sticks, add some water.|
Smoothie Full jug| Use this program when you want a full jug with smoothie. Do not fill over the max line on the jug.| 120 seconds
Smoothie Half jug| When you are making a smaller batch with smoothie. For half a jug, fill up to 0.9L.| 92 Seconds
Auto clean| Put 1.8L water into the jug and run this program to clean the jug.| 45 seconds

TROUBLESHOOTING

Problem| Possible reason| Solution
The blender will not start.| The switch is not set to 0

Is the jug properly placed?

| Turn the switch to 0. The icons should stop blinking, and you can choose a pre set program or manual speed

Place the jug correctly onto the base

Blender stops| The blender has run more than 2 minutes.| Let the motor cool down
Content does not blend properly| Not enough fluid| Use the temper, or consider adding more fluid in the jar to help circulation

TIPS AND TRICKS
TIPS ON ICE CRUSHING

By adding water to the ice, you get a better crushing performance.
If the ice sticks to the jug during crushing, it should be added some water. You can also try to give the jug a gentle knock to get the ice to fall down to the knifes.

TIPS ON BLENDING

If you like to use hard seeds or other food which is difficult to blend, you should try to blend these ingredients as they are, without fluid. If the blending does not work, add fluid in small portions until it blends well.
If the ingredients are too dry, the ingredients might not get in good contact with the knives, so the knives don’t get hold of all the ingredients. You can help this by add fluid and reduce the speed to minimum and give the jug a gentle knock to help the ingredients to fall down to get in good contact with the knifes so the blending will work well.

More tips, recipes and tricks can be found on www.wilfa.com or our local web sites.

CLEANING AND MAINTENANCE

Disconnect the power from main supply.
Disassemble all removable parts before cleaning.
Always clean the removable parts immediately after use.
Clean all removable parts in lukewarm water with dishwashing liquid.
The blender jug can be rinsed with water. It can also be cleaned by pouring water into the blender jug, closing the lid and then operating the blender in Auto clean. Then pour out the water, rinse with water, and dry with a soft cloth.
Use dry cloth to clean the main body.

Note: Be careful when cleaning the parts. Avoid touching the sharp blades! After cleaning, repack the appliance and store it in a dry place and avoid sun exposure.

GUARANTEE

Wilfa issues a 5 year guarantee on this product from the day of purchase is done. The guarantee covers production failure or defects that arise during the guarantee period. Your purchase receipt works as proof towards retailer if claiming your guarantee.

The guarantee is valid only for products that are bought and used in private households. The guarantee is not valid if the product is used commercially. The guarantee is not valid if the product is misused, used by negligence, if not following instructions given by Wilfa, if modified or if unauthorized reparation is done. The guarantee is also not valid for normal wear of the product, misuse, lack of maintenance, use of wrong electrical voltage or:

Overloading of product
Damage on glass
Parts which are normally worn down
Parts you can expect being replaced regularly (e.g. filter, battery etc.)

PRODUCT SPECIFICATIONS

220V~240V~50Hz

SUPPORT AND SPARE PARTS
For support please visit us at wilfa.com, and see our customer service/support page. Here you will find frequently asked questions, spare parts, tips and tricks and all our contact information.

RECYCLABILITY

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling free of charge.