Visteon 2W CLUSTER_ML Digital Cluster with BTLE Instructions

Visteon 2W CLUSTER_ML Digital Cluster with BTLE

Declaration of Conformity

• Model Name: 2W CLUSTER_ML
• Type of product: Digital Cluster with BTLE
• Brand: Visteon
• Manufacturer: Visteon Corporation
• One Village center drive, Van Buren Township
• 48111-5711 Michigan
• United States of America

CE MARK

Simplified EU DoC: Hereby, Visteon Corporation declares that the radio equipment type 2W CLUSTER_ML is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.visteondocs.com/

Hereby, Visteon Corporation, declares that this 2W CLUSTER_ML is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

The following information shall also be included in the case of radio equipment intentionally emitting radio waves:

• Frequency band: 2.4 GHz
• maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates. Max output power = 3.5 dBm

(U.S.A. and Canada)

FCC

FCC ID: NT8-H2WCLUSTERML

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. The device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Class B device notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF exposure safety

• This device complies with the FCC RF exposure limits and has been evaluated in compliance with mobile exposure conditions.
• The equipment must be installed and operated with a minimum distance of 20 cm of the human body.

ISED CANADA

IC: 3043A-H2WCML

This device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2.  The device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF exposure safety

• This device complies with ISED RF exposure limits and has been evaluated in compliance with mobile exposure conditions.
• The equipment must be installed and operated with a minimum distance of 20 cm of the human body.

CAN ICES-003

This Class B digital apparatus complies with Canadian ICES-003.

Argentina

South Korea

• Visteon Corporation
• 2W CLUSTER_ML
• Visteon/USA

Serbia

Singapore

Australia

Thailand

United Arab Emirates

Ukraine

• https://www.visteondocs.com/.

Mexico

Homologation by IFETEL ID

Certification By: NYCE

• Name, address and contact telephone of the importer (Honda information)
• Any warnings applicable to the installation and operation of the product and needed to protect the safety and health of the users. ?? (Honda will need to provide this info)
• Clear instructions about the installation and operation of the equipment (Honda will need to provide this info)

specifications

• Supply voltage: 13,2V (Vcc)
• Supply current: 200 mA
• Frequency: 2.4 GHz

Taiwan

CCAH20LPA080T

1. Product name: Digital Cluster with BTLE
2. Model name: 2W CLUSTER_ML
3. Manufacturer: Visteon Corporation
4. NCC caution statement

Any changes or modifications are not allowed. The product is subject to not cause harmful interference to radio communications and air flight safety. If this equipment does cause interference, which can be determined stop shipping till the product is improved. This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.’ In the Chinese language, the warning would be.

HONDA 2W CLUSTER_ML

2W CLUSTER_ML Operation Guide

Instructions to access to the electronic labeling

1. IGN ON
2. The opening animation begins and completes after 3sec.
3.  The main screen appears like below.
4. Long press Right S/W then enter a Setting mode
5. The setting screen appears like below and FUNCTION is selected at the beginning.
6. Short press Down S/W at three times then SERVICE is selected
7. Short press Right S/W then MAINTENANCE is selected at the center of the screen.
8. Short press Down S/W at three times then REGULATORY is selected.
9.  Short press Right S/W then the REGULATORY screen shows up.

References

• Visteon Docs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>