KFD DC Adapter Compatible Power Supply Cord User Manual

: June 3, 2024
: KFD

Table of Contents

KFD

KFD DC Adapter Compatible Power Supply Cord

KFD-DC-Adapter-Compatible-for-Inogen-One-img

Specifications

DIMENSIONS: 12 x 3.5 x 1.61 inches
WEIGHT: 6 Ounces
INPUT: DC 12V
OUTPUT: 120W Max
INOGEN MODEL: Model IO-300 IO-400 1400-1000 1400-2000 BA-301 BA-306 BA-503 DV6X-619 DV51D-619
COMPATIBILITY: Inogen One G3 , Inogen One G4 , Inogen One G4 DC Power Cable Model# BA-306 BA301 BA-503 BA306 BA301 BA503 DV6X-619 DV51D-619 DV6X619 DV51D619, Inogen G3 IO-300 IO300 10-300 I0-300, Inogen G3 OxyGo Fit 1400-1000 14001000, Inogen G4 IO-400 IO400 I0-400 10-400, Inogen G4 OxyGo Fit 1400-2000 14002000, Inogen One G5 Oxygen Concentrator Model IO-500 I0-500 10-500

Product Introduction

KFD DC adapter has been specifically designed for Inogen One. It comes with high level protection. It provides over-voltage protection, over heat protection, over current protection and short circuit protection. It is the perfect adapter as it provides over all protection to your devices. The fuse of the adapter is simple to use and is quite durable. It can be repaired as easily as changing a battery.

It features non-slip shrapnel on both sides which provides secure plug. It is compatible with cars and boats as well. The adapter is made of high quality pure copper wide which is 18 AWG that has a thickness of 3*0.824mm. it is CE / FCC / RoHS certified. It takes an input of DC 12V and an output 120W.

Compatible with Inogen One G3, Inogen One G4, and Inogen One G5 DC Power Cable, KFD Car 12V DC Power Cable Adapter Model # DV6X-619 DV51D-619 DV6X619 DV51D619 BA-306 BA301 BA-503 BA-306 BA301 BA503 cigarette lighter plug power supply cord cable battery charger auto vehicle boat RV camper us mains

Compatible with the following models: Inogen G3 IO-300 IO-300 10-300 I0-300, Inogen G3 OxyGo Fit 1400-1000 14001000, Inogen G4 IO-400 I0-400 10-400, and Inogen G4 OxyGo Fit 1400-2000 14002000 Adapter Charger Power Supply Cable Cord.

What’s in the Box?

1 * 12V Car Charger DC Adapter Cigarette Lighter Plug for Inogen One G3 G4 G5
1 * User Manual

User Guide

Changing the Fuse

KFD-DC-Adapter-Compatible-for-Inogen-One-1

The fuse is simple to change. Revolve the top of the adapter to take it off. You can then take out the fuse and change it with a new one and close it back.

Purchase warning

Please verify the devices or the prior power adapter’s DC output voltage and amps.
Verify that this charger matches the model of your device.
Please let us know if your model is not listed here and we will check it for you.

FAQs

Will this function with a Jackery or other portable power supply?****

Yes, it will function properly if your generator includes a 12 volt outlet, like those found in many autos.

Does this function with the ResMed Airsense 11?****

This converter is universal and works with all devices. As long as the device’s wattage rating is within this one’s output range, it can be used to power anything that operates on 24 volts with a 12 volt battery source. Check the transformer on the cord that plugs into the wall for your Airsense 11. It will state that a range of AC voltages may be input. The output voltage will also be in DC. It ought to operate without a problem if it specifies roughly 24 DC volts.

Will this function with the portable CPAP HDM Z1?****

Yes, it will work with CPAP HDM Z1.

Can this be connected straight to a battery?****

I purchased a set of wires with female lighter adapters on both ends and alligator clips on one end to attach to the battery. There are a few cords, but it still functions.

Is it possible to use my automobile to charge my Maxoak K5 multi- functional power through this?****