Guangdong Mailiang Technology G9-48 LED Smart Light User Manual
- June 4, 2024
- Guangdong Mailiang Technology
Table of Contents
LED SMART LIGHT
User Manual
Specification
Input Voltage: AC120V 60Hz Max load : 100W
Input max current: IA Standby Consumption: 0.1mA
Wireless type: Wi-Fi 2.40z
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
How to connect the device by App
Step 1: Use your mobile phone to scan the QR code below or search “Smart Life” from the Apple store or Google play to download the App
Input account name and password to log in.
If you don’t have an account, please register an account first. The system
will auto-identify your country. You can also select a country by yourself.
You can use your mobile phone number or Email address as your account name.
Tap on “Next” to get a verification code via SMS on your mobile phone. Enter
the desired password. Tap on ‘Confirm’ to finish your registration.
Make sure your mobile phone is connected to the Wi-Fi in your home. Tap on “Add Device” or tap ‘ +’ on the upper right corner of the homepage. And select “Auto Scan” or select “switch (Wi-Fi)” from the device type list.
Step 2: Switch on the power supply. The indicator light on the Wi-Fi
dimmer switch will blink rapidly. If it does not blink, press the paring key
for around 10 seconds. The indicator will flash from slow-fast – stay still.
Then release when the indicator light is still. After 3 seconds, the indicator
will blink rapidly (twice per second). Tap on “Confirm light rapidly blink” to
continue.
Step 3: Select a network for your Wi-Fi dimmer switch and tap on “Confirm” to connect the device.
Step 4: After Smart Life added the device successfully, you can rename the Wi-Fi dimmer switch. And you can share the device with a family member
How to set the device
Switch On/Off: Tap on the device name on the homepage (here is “Wi-Fi dimmer switch”) to enter the device setting. You can switch it On/Off and dim the light.
Set timer: You can set a countdown or set a schedule to switch On/Off your smart device.
How to control device by Amazon Alexa
Step 1: Open the Amazon Alexa App. Go to Home and select Skills. Input Smart Life in the search bar. Tap on Enable to add the skill.
Step 2: Select your country code. Enter our Smart Life App account name and password. Then tap on Link Now to continue. After the link succeeds, close the window and go back to the Alexa App.
Step 3: Tap on Smart Home, Select Devices, and then tap on Discover.
Alexa will discover the device, After about 20 seconds, the devices will show in the list.
Now you can use Alexa to voice control your Smart devices.
“OK, Alexa, turn On/Off xxx”
“OK, Alexa, set XXX to 35%”
How to control a device by Google Home
Step 1: Open the Google Home or Google Assistant App. Go to Home and
select Home Control. Tap on `+’ in the lower right corner to add skill. You
can find ‘Smart Life’ in the ‘Add device’ list.
Step 2: Select your country code. Enter your Smart Life App account name and password. Then tap on Link Now to continue.
Step 3: After the link succeeds, you can assign rooms for your smart devices. Later you can find the Smart devices in the Home Control list.
Now you can use our Google Home to voice control your Smart devices.
“OK, Google, turn On/Off xxx”
“Ok, Google, Set xxx to 35%”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>