BENCHDOGS Rail Square Repeat Stop Instruction Manual
- June 4, 2024
- BENCHDOGS
Table of Contents
BENCHDOGS Rail Square Repeat Stop
WHAT’S IN THE KIT
- Rail Square Fence (600mm) x 1
- Joining Bar x 1
- Calibration Stop x 1
- Connector Block x 1
- Thumb Screw M6 x 2
- Nylon Washers x 2
- Aluminium Stop x 1
- Add on Extrusion (445mm) x 1
- Allen Keys x 2
HOW TO USE
-
Join your rail square fence and add on extrusion using the joining bar. Tighten the grub screws using the supplied allen keys.
-
Once tightened, add your connector block to support the join.
-
Attach your fence to your rail square using the thumbscrews.
-
Attach your rail square to your rail and secure using the cam screws. Align your fence to the edge of the rail and tighten the thumbscrews.
-
Add your calibration block to secure the setup and tighten the grub screw using the supplied allen keys.
-
Place the aluminium stop to the desire measurement, place against the edge of your material and proceed to cut.
FOR MORE INFORMATION PLEASE VISIT
[email protected]
WWW.BENCHDOGS.CO.UK
Documents / Resources
|
BENCHDOGS Rail Square Repeat
Stop
[pdf] Instruction Manual
Rail Square Repeat Stop, Repeat Stop, Rail Square, Square Repeat Stop
---|---