Bestway 53477E Jump ‘n Climb Kids Inflatable Mega Bounce Park Owner’s Manual
- June 25, 2024
- Bestway
Table of Contents
**Bestway 53477E Jump ‘n Climb Kids Inflatable Mega Bounce Park Owner’s Manual
**
MPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE ASSEMBLING THIS
INFLATABLE DEVICE AND KEEP INSTRUCTIONS FOR FUTURE USE.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR
DEATH.
WARNING
WARNING
Electrocution Risk
Keep all electrical lines, radios, speakers, and other electrical devices away
from inflatable device.
Do not place inflatable device near or under overhead electrical lines.
WARNING:
- Failure to follow the installation and operating instructions present a risk of serious injury or death.
- Place the inflatable device on level ground, not less than 10 ft. (3 m) in any direction from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
- Do not install inflatable device over concrete, asphalt, packed earth, carpet or any other hard surface. A fall onto a hard surface can result in serious injury to the user.
- To be used on soft ground only, the impact absorbing material (eg. Rubber mulch, engineered wood fiber (EWF) etc) shall be at least 6.6 ft. (2 m) from opening in all directions away from the inflatable device.
- Use of this product may cause friction burns to exposed skin. Ensure that clothing fully covers arms and legs, as well as the torso.
AIR-BLOWER SAFETY INFORMATION
- READ AND SAVE THESE INSTRUCTIONS
- USE ONLY ON GFCI PROTECTED RECEPTACLES
WARNING – ELECTROCUTION HAZARD: DO NOT USE EXTENSION CORDS WITH THIS PRODUCT.
WARNING:
- To reduce the risk of fire or electric shock, do not use this air blower with any solid-state speed control device.
- Prevent sharp and hard objects from dropping into and prevent liquid from flowing into the air blower.
- Do not wash the air blower with liquid, you must first unplug it from power source and then wipe it with wet cloth when you clear it.
- Do not draw and pull motor leads, and do not bump the air blower, you’d better use the air blower between negative five and fifty centigrade, If you let the air blower be baked in the high temperature, motor leads, enamelled cables and heating bodies will aging and shorten it’s life.
CAUTION – ELECTRICALLY OPERATED PRODUCT: NOT RECOMMENDED FOR CHILDREN UNDER 14 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK.
KEEP CHILDREN AWAY: Do not allow children to play with or around the unit, in any way, which could result in injury.
PROTECT POWER CORD FROM DAMAGE: Never operate a unit with a damaged power
cord, as this may lead to electrical or fire hazards. If the power supply cord
is damaged, it must be replaced by a cord of the same type and amperage
rating.
Always check the adaptor for any conditions which may result in the risk of
fire, electric shock, or injury to persons and that, in an event such
conditions, do not use the product until it was properly repaired.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference
received, including interference that may cause undesired operation.
-
Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
OPERATION
Place the air blower on a steady net surface where children can be kept away. This air blower is for use on a nominal 120-volt circuit and has a grounding plug similar to the plug illustrated in sketch (A). Only connect the product to an outlet having the same configuration as the plug. Do not use an adapter with this product
KEEP UNIT GROUNDED: Air blower should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING: Improper installation of the grounding plug is able to result in
a risk of electric shock. When repair or replacement of the cord or plug is
required, do not connect the grounding wire to either flat blade terminal.
The wire with insulation having an outer surface that is green with or without
yellow stripes is the grounding wire.
CAUTION: Check with a qualified electrician or serviceman when the
grounding instructions are not completely understood, or when in doubt as to
whether the air blower is properly grounded. Do not modify the plug provided.
If it will not fit the outlet, have the proper outlet installed by a qualified
electrician. The appliance must be positioned so that the plug is accessible.
If the supply cord is damaged, it must be replaced by the manufacture or its
service agent or a similarly qualified person in order to avoid a hazard.
PRODUCT DESCRIPTION
Item| Age| Maximum number of users| Maximum weight capacity| Maximum weight
per use| Maximum number of users for each platform area| Maximum number of
users for each slide area| Maximum number of users for bouncer area| Maximum
fall height| Critical fall height
---|---|---|---|---|---|---|---|---|---
53473E/53477E| 3+| 5| 386 lbs (175 kg)| 77 lbs (35 kg)| 1| 1| 2| 46 in (1.16
m)| 64 in (1.62 m)
Blower Rating: AC110-120V, 60Hz, 4.1A
IMPORTANT: The platform, slide and climbing area are divided into
sections. For each section, only one user
at a time is allowed.
GFCI TEST
WARNING: Risk of electric shock. The GFCI must be tested before each use.
WARNING: Do not use the blower if the GFCI test fails.
SETUP INSTRUCTIONS
WARNING
Follow Anchoring Instructions
User must read and follow anchoring instructions to ensure the proper:
number of anchors used, soil conditions, and stake installation
Wind Speed Judgement
Stake Angle
Placement:
Use on a flat, grassy area only. Do not use on pavement or hard surfaces.
Usage area should be free of rocks, bumps, holes, sticks, etc. The slide park
setup location should have a minimum distance of 10 ft. (305 cm) from any
free-standing structures or obstructions. This include: houses, garages,
fences, trees, playground equipment, large rocks, etc.
ASSEMBLY
Place on level ground and firm grass or soil to allow proper use of stakes.
Do not set up the inflatable device on a slope or incline.
Stakes are to be driven straight down until the top of the stake is below
ground level. Do not drive stakes at an angle.
For best holding strength, drive stakes into hard, dry soil. In loose or wet
soil, or both, stake holding strength will be reduced.
Do not use the product if wind speed exceeds 20 mph.
Do not set up in windy or rainy conditions: sudden gust of wind may lift the
product off the ground.
Only the blower provided or other manufacturer specified replacement blower
should be used for inflation.
Use only with Ground Fault Circuit Interrupter (GFCI) receptacle.
Do not use extension cords with this product and keep the blower and power
cord away from water.
Product shall be fully inflated and anchored before use.
ATTENTION: This toy is not safe if the anchorage system is not used as it
may be lifted by light winds.
ATTENTION: After inflation, the blower should run continuously while
children are playing.
INDOOR USE INSTRUCTION
IMPORTANT
-
The product setup location should have a minimum distance of 5.9 ft. (180 cm) from any freestanding structures or obstructions.
-
We recommend adding soft
cushions such as rubber, foam and carpet under the product. -
It is not necessary to use stakes indoors. The product is stable during the usage, and there is no risk of being lifted by light winds.
WARNING
WARNING
- Constant, competent adult supervision of children and other young users is required at all times in front of the device where all parts of play areas can be seen.
- Keep the area around the product clean, and clear of objects, to prevent slips and falls.
- Always check all anchors before and during use.
- To prevent electric shock, do not clean the blower with water.
- Children should not wear loose or baggy clothing, scarves, hoods or clothing with drawstrings or long cords while playing in this product.
- Children must remove helmets, loose clothing, scarves, headgear, shoes and glasses, as well as anysharp or hard objects from their pockets, as they may puncture the bounding surface.
- Separation of larger children from smaller children. Do not allow children to play together who are unevenly matched in weight and height.
- Do not allow users to climb or hang on containment walls.
- Do not allow users to do somersaults or rough play.
- Do not allow food, drink or gum inside unit.
- Children must not slide down head first on their stomach.
- Keep pets away from product.
- Do not attach items to the inflatable device that are not specifically designed for use with the inflatable device, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they have the potential to cause a strangulation hazard.
MAINTENANCE OF SLIDE PARK
- To keep the product clean: wipe the inflatable device using a dry cloth or a cloth dampened with a neutral, non-flammable, non-toxic cleaning and sanitizing solution or pure water.
- If applicable, remove water and debris from pocket steps after each play cycle.
- The inflatable device is subject to wear and deterioration. Inspect for signs of fabric failure; weak or torn surface must be repaired promptly.
MAINTENANCE OF AIR BLOWER
The source of electrical supply must be disconnected prior to any servicing or cleaning.
- Use a dry cloth to gently clean all surfaces.
- Store in a cool, dry place and out of children’s reach.
DEFLATION & STORAGE
IMPORTANT: All children must exit the slide park before deflation.
WARNING:
-
Store park in a secure place, away from children, to prevent suffocation. Never leave either the park or the blower outside when not in use.
-
Please place it the dry and ventilated position where is not sour, not alkali and not corrosive gases. After having used it in outdoors, you should place it in a dry and ventilated room in time. Do not let water into the air-blower.
-
Turn off the blower motor and unplug it from the outlet.
-
Remove stakes from the park and the blower.
-
Fold the slide park toward the center.
-
Roll up the slide park tightly and compress the fabric to expel all of the remaining air.
-
Slip the carrying bag over the rolled-up inflatable park. Flip the bag and the park over, close the bag, and store the park and the blower in a dry place.
TROUBLESHOOTING
PROBLEM | CAUSE |
---|---|
Motor won’t run |
- Switch is not turned on.
- The circuit is open or not connected correctly.
- Electrical parts are damaged.
- Objects are blocking the blower fan.
Motor runs but wheel makes a scraping noise|
- Screws are loose in the vane wheel.
- Objects are blocking the blower fan.
Motor is unable to run normally|
- The power source is inconsistent.
- The motor has been affected by condensation.
- Electrical parts are damaged.
- The impeller is loose
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>