Yoomigle QS40 Smart Watch User Manual

Yoomigle QS40 Smart Watch User Manual

Question: Why can’t the smart watch receive message notifications?
Answer:
For Android phones:

1. Ensure the message notification switch is enabled in the app.
2. Verify if notifications are displayed normally on the phone’s notification bar. The smartwatch receives push notifications by reading these notifications. If there are no notifications in the bar, the watch won’t receive them. (You need to navigate to your phone settings, locate notifications and status bars, and enable notifications for Whatsapp, Facebook, phone calls, SMS, etc.)
3. Open the app–click on other settings–click on accessibility–and enable the app.
4. Open Whatsapp–click on Settings–click on New Message Notification–and enable Show Notification Details.
5. Open Facebook–click on Settings–click on Message Notification–and enable Notification Display Message Content.

For iPhone:

1. Ensure the message notification switch is enabled in the app.
2. Go to phone settings–click on notifications, select Whatsapp, Facebook, SMS, phone, etc–enable Allow Notifications and show in “Notification Center.”
3. Open Whatsapp–click on Settings–click on New Message Notification–and enable Show Notification Details.
4. Open Facebook–click on Settings–click on Message Notification–and enable Notification Display Message Content.

Question: How to connect the watch and sync data?
Answer:
For Android phones:
Turn on the phone’s Bluetooth, open the app, click on “Bind device,” and select the desired device. After a successful connection, data will sync to the app. Avoid connecting the wristband’s Bluetooth via the phone’s Bluetooth settings directly. If done, click “Unpair” to disconnect, or it will interfere with the app’s ability to connect with the wristband.

For Apple phones:
Turn on the phone’s Bluetooth, open the app, click on “Bind device,” and select the desired device. When the pairing prompt appears, click “Pair.” After a successful connection, data will sync to the app.

Question: Why is there no sleep data when wearing the watch to sleep?
Answer:

1. If the body is too active during sleep or the sleep quality is poor, the watch identifies it as a non-sleep state.
2. Only the sleep time recorded between 8:00 pm and 10:00 am is considered.
3. Sleep monitoring is designed to simulate the natural state of falling asleep and waking up. Wear the watch normally when using this feature.
4. Wearing the watch too late into your sleep or at the onset of sleep can lead to errors.

Question: Why isn’t my smartwatch counting steps?
Answer:
The smartwatch doesn’t count steps when in sleep mode. For instance, upon waking up in the morning, the smartwatch needs to be in an awakened state to start counting steps. Wear the smartwatch and walk continuously for a few dozen steps to check if it counts. The step counting mechanism involves an automatic learning process adapting to different user behaviors.

Question: Is the smartwatch waterproof?
Answer:
Yes, this smartwatch is rated IP67 waterproof. However, it is not resistant to steam, warm water, or hot water, though it is splash-proof for daily use. It is not advisable to wear the device while swimming as water pressure may affect its performance.

Question: Why doesn’t the smartwatch display the weather?
Answer:
To view real-time weather information, open the app and ensure that your smartwatch is connected to your phone via Bluetooth.

Question: How to set the time on the watch?
Answer:
Open the Fit Cloud Pro app, turn on Bluetooth, and the time will automatically sync after connecting to the wristband.

Question: Why does the watch frequently disconnect?
Answer:
This issue might be due to the phone system intercepting or clearing the software, leading to malfunction. Please adjust your phone settings according to its brand. For Android phones, you can set a whitelist and enable automatic start-up management.
OPPO phone settings:

1. Open OPPO Security Center – click on Privacy Permissions – click on App Permissions Management – click on the app – enable “I trust this app.”
2. Open the app – click on the touch key at the bottom left of the phone – click on the lock on the top left corner of the app.
3. Enable self-start management – click on the phone manager – click on self-start management – enable the app.

VIVO phone settings:

1.  Open iManager – click on the top right settings – click on Acceleration White List – enable the app.
2. Open the manager – click on software management – click on self-start management – enable the app.

Xiaomi phone settings:

1. Open the app – long press the home key – pull down the app – click on the lock task.
2. Open the phone settings – click on authorization management – click on self-start management – enable the app.

Meizu phone settings:

1. Open the Security Center – click on Advanced – click on Permission Management – click on all apps – click on the app – enable “Trust this app” – enable “Allow self-start” – enable “Display notifications.”
2. Open the phone manager – click on permission management – click on self-start management – enable the app.
3. Open the phone manager – click on phone acceleration – click on the screen’s top right settings – click on phone acceleration white list – click on add white list.

LeTV phone settings:

1. Open the app – click on the phone task key – pull down the app – lock the app.
2. Open the phone manager – click on Security & Privacy – click on self-start management – enable the app.
3. Open the phone manager – click on Security & Privacy – click on App Permissions Management – click on Phone, Contacts, Messages – enable the app.

Huawei phone settings:

1. Open the phone settings – click on Protected Background Apps – enable the app or open the phone manager – click on Acceleration Optimization – click on Protected Apps – enable the app.
2. Open the phone settings – click on Start-up Apps – enable the app.

Samsung phone settings:

1. Open the app – click on the touch key at the bottom left of the phone – click on lock app.
2. Open the Auto Run switch. Gionee phone settings: System Manager – Green Background – Process White List – Select “Add application to White List.”

Question: Is the data secure?
Answer:
Yes, the data on the watch is protected by advanced encryption and is not shared without permission.

Question: How compatible is the smartwatch?
Answer:
This smartwatch is compatible with most iOS and Android smartphones. Ensure that the phone’s operating system is iOS 9.0 and above or Android 4.4 and above, and supports Bluetooth 5.2 or higher versions.

Question: Can I use it to answer and make phone calls?
Answer:
Yes, it supports Bluetooth calling features. Simply pair the watch with your phone, and you can answer and make calls directly through the watch.

Question: How long is the battery life?
Answer:
Under normal usage, the battery can last for 2-3 days. The battery life can vary depending on the usage and settings.

Question: How do I use the health monitoring features of the watch?
Answer:
You can easily access the health monitoring features through the health or fitness apps on the watch. In the app, you can see real-time heart rate, steps, sleep data, etc. You can also sync the data to the accompanying app on your phone for a more in-depth analysis and tracking of your health and fitness progress.

Question: Can I wear this watch while exercising?
Answer:
Absolutely, it has sports tracking features and is capable of monitoring your exercise data. Its waterproof and sweat-resistant design makes it suitable for various sports scenarios.

Question: Can I customize the watch face style?
Answer:
Yes, the watch offers a variety of watch face styles to choose from, and it allows you to download more customized watch faces.

If you have any other questions about the product, feel free to contact us at the following email:
fremtudmy_service@163.com

Or scan the WhatsApp QR code below to get help.

We will reply within 24 hours.

Thanks, fremtudmy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>