UCP Flash Utility SOP Installation Guide
- June 3, 2024
- UCP
Table of Contents
UCP Flash Utility SOP
- UCP Flash Utility SOP-FEATURE
-
Execute the *.exe file
-
If you see the UAC prompt message, press Yes
-
Wait for completion and press “Y” to restart the system
- System will auto power on into BIOS and flash.
- Start flash update automatically and wait it completed.
- After flash finish, system will reboot automatically.
- Boot system. Please press “Delete” key to enter BIOS Setup Menu.
- Press F1 key to switch Advanced Settings
- Choose Exit ” page and s elect “Load Default Setting” and press “Enter” key
- Select “ OK ” to load default settings
- Choose Exit ” page and s elect “Save & Exit Setup” and press “Enter” key
- Select “ OK ” to restart
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>