Tuningsworld TRB-TJ-1545-LC Front Adjustable Track Bar Installation Guide
- June 1, 2024
- Tuningsworld
Table of Contents
Tuningsworld TRB-TJ-1545-LC Front Adjustable Track Bar Installation Guide
PRODUCT INFORMATION
It is an adjustable front track bar that is for vehicles with 1.5-4.5 inches
lifted heights. It helps to re-enter your axle and increases the vehicle’s
stability.
Note: Don’t extend the track bar over the suggested length range to avoid
breakage or bending.
KIT CONTENTS
INSTRUCTIONS
- Jack up the front end of the vehicle and support it with floor jack stands. Remember to chock the rear wheels.
- Remove the front wheels and tires.
- Remove the castle nut on the track bar ball joint. Use a pickle fork to get the ball joint off the frame bracket.
- Take the bolt out on the opposite side using a 15mm socket. Keep the tab nut for reuse. Remove the factory track bar from the vehicle.
- Adjust the length to meet your demands. Install the new track bar in the vehicle and torque the bolts and nuts to spec. Put the front tires and wheels on.
- Book an alignment.
MAINTENANCE
Having all bolts/nuts checked for tightness after the first 500 miles and then every 1000 miles or 3 months is highly suggested. Wheel alignment steering system, driveline systems, and suspension must be inspected by a qualified professional mechanic at least every 3000 miles.
All modifications must be installed by qualified personnel and in compliance with your local modification regulations.
TRB-TJ-1545-LC
Documents / Resources
|
Tuningsworld TRB-TJ-1545-LC Front Adjustable Track
Bar
[pdf] Installation Guide
TRB-TJ-1545-LC Front Adjustable Track Bar, TRB-TJ-1545-LC, Front Adjustable
Track Bar, Adjustable Track Bar, Track Bar
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>