XIIAOZET LK100W Print Server User Guide
- June 1, 2024
- XIIAOZET
Table of Contents
XIIAOZET LK100W Print Server
Specifications
- Model Name: LK100W Print Server
- Network: Wi-Fi: Supports 2.4GHz, IEEE 802.11b/g/n; LAN Ports: 10M/100 Adaptive, Compliant with IEEE 802.3 and IEEE 802.3u standards
- Current Voltage: DC 5V 1A
- Management Functions: Print Protocols
- System Requirements: Supports RAW protocol, IPP protocol, Windows 7 & above, Linux, and macOS (Printer requires corresponding drivers for these systems)
Product Usage Instructions
The Print Server converts standard USB printers into network printers, enabling multiple computers to print via a shared printer within the same network. It enhances printing efficiency and convenience by facilitating shared access and is compatible with over 95% of printer models available in the market.
- Connect the power adapter to the 5V/1A port and the printer to the USB port on the print server.
- Power on the adapter, wait 10-30 seconds and check for steady POWER and SYS indicators.
- Configure Print Server to Connect to the Local Network
The print server can be connected to the network…
FAQ
- Q: Can Mac users use this Print Server?
- A: While this manual is primarily for Windows users, Mac users can find tutorials on our website for guidance on using the Print Server.
- Q: What should I do if I encounter missing or damaged components during setup?
- A: In case of missing or damaged components, please reach out to our support team at support@xiiaozet.net for assistance.
ThankyouforchoosingXiiaozetproducts.Before getting
started,pleasereadthismanualcarefully for the best performance. This manual is
for Windows users, but Mac user can find tutorials on our website.
If you need help,visitourSupportpageonthe official website. You’ll find
drivers, FAQs, and videos there. Can’tfindwhatyouneed?Just shoot usanemail.
We’re here to enhance printing solutions, simplify tasks, and make printing
easy for you, even for those without professional knowledge. Our goal is to
provide the best possible support, ensuring you can enjoy using our products.
OfficialWebsite:www.xiiaozet.net.
SupportEmail:support@xiiaozet.net.
Use of Trademarks, Registered Trademarks, and Other Protected Names and
Symbols
This manual may refer to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies unrelated to Xiaozet.
Such references are solely for illustrative purposes and do not imply
endorsement of any product or service by Xiiaozet or the endorsement of the
products) covered in this manual by the respective third-party company.
Regardless of any explicit acknowledgment elsewhere in this document, Xiaozet
acknowledges that all trademarks, registered trademarks, service marks, and
other protected names and/or symbols contained herein and in related documents
are the property of their respective owners.
Safety Measures
- Do not make wiring connections while the product and/or electrical lines are energized.
- Position and route cables (including power cables) to prevent electrical, tripping, or safety hazards.
Product Introduction
- The Print Server converts standard USB printers into network printers, enabling multiple computers to print via a shared printer within the same network.
- This enhances printing efficiency and convenience by facilitating shared access.
- Additionally, it is compatible with over 95% of printer models available in the market.
How does it work?
Setting up the print server involves three main steps:
- Step 1: Install the hardware (see section 2).
- Step 2: Configure the print server (see section 3).
- Step3: Set up “Add Printer” on your computer (see section 4).
- If anything is missing or damaged, please reach out to us: support@xiiaozet.net.
- If you find this manual confusing, check out our website for a clearer tool or video tutorial: www.xiiaozet.net.
Product Detail
- DUSB:USB2.0 Connect printer(s)
- LAN/LAN1 port: Configure print server or wired network connection
- LAN2 port, Wired network connection
- 5V/1A power port
- Factory reset button
Explanation of the Indicator Lights
| Power | Steady on: printer server powered on |
|---|---|
| SYS | Slow flashing: system booting up Steady on device startup completed, |
normal operation
| Fast flashing: restore factory settings
---|---
USB| Steady on: printer connected
Not lit: printer disconnected
Cloud| Steady on: Wi-Fi/ Cloud service
connection successful
LAN2/LAN1/ LAN| Steady on: normal Ethernet cable connection
Not lit: cable disconnection or
issues
Product Specification
| Model Name | LK100W Print Server |
|---|---|
| Network Protocols | Wi-Fi: Supports 2.4GHz, IEEE 802.11b/g/n; |
LAN Ports: 10M/100 Adaptive, Compliant with IEEE 802.3 and
IEEE 802.3u standards
Current Voltage| DC 5V ～ 1A
Management
Functions
| Supports
---|---
Print Protocols| RAW protocol IPP protocol
System Requirements| Windows 7 & above, Linux, and macOS (It requires the
printer to have the corresponding drivers for these systems.)
Install Hardware
- Connect the power adapter to the 5V/1A port and the printer to the USB port on the print server.
- Power on the adapter, wait 10-30 seconds and check for steady POWER and SYS indicators.
Configure Print Server to Connect to the Local Network
The print server can be connected to the network either through a wired or
wireless connection.
Note: Please select only one method you prefer for connection.
- If you want to use a wired connection to the network, please continue reading on this page.
- If you want to use a wireless connection to the network, please turn.
Method One
Wired Connection
- After powering on the print server and connecting the USB device, use an Ethernet cable to connect the LAN1/LAN2 port of print server to the router or switch.
- The print server will obtain an IP address assigned by the router’s DHCP.
- The LAN1/ LAN2 indicator remains illuminated, indicating that the wired network setup is complete.
Note: If your local network doesn’t utilize DHCP for IP assignment,
you’ll need to manually set the IP address for the print server. Refer to our
official website’s video tutorial for detailed instructions.
Congratulations on successfully configuring the print server to connect to the
network via a wired connection!
Please turn to Page[14] for the “Add Printer” steps.
Method Two: Wireless (WiFi) Network Connection
The process can be completed via a computer or a smartphone. (Here are the
network configuration steps for when the printer server is in its initial
state.)
- Locate and connect to the Wi-Fi network named “USBServer_Setup” from your computer’s available networks list.
- Once you connect to USBServer_Setup, a network setup page will automatically pop up on your computer or phone.
- Simply select your 2.4G Wi-Fi and enter your Wi-Fi password. The printer server will then automatically configure the Wi-Fi parameters.
- Wait for about 1 minute, and when the cloud indicator light stays steadily lit, it indicates a successful network setup.
Congratulations! You have successfully configured the print server to
connect to the network via a wireless connection!
Please read the following tutorial on how to add a printer to a Windows
computer.
Add Printer to Computer
- For Windows users who want to add the printer using the quick installation tool, please continue reading on this page. (Recommend)
- If you need to manually add a printer, please refer to the official website’s tutorial.
- For macOS users, since there is no quick add tool available, you’ll need to manually add the printer.
- please refer to the official website’s tutorial.
- When manually adding a printer, please ensure that your computer has the appropriate printer drivers installed.
Add Printer on Windows Computer Using the Installation Tool
- Download and open the installation tool from the Xiiaozet official website.
- Official website: www.xiiaozet.net.
-
Open the installation tool and choose “Local Printing,” then proceed by clicking “Next.”
-
The installation tool will search for Xiaozet print servers in the local network. Choose the print server from the search results and click “Next
-
The installation tool will automatically identify the printer model of the server, detect and match the corresponding driver, and select the printers for installation. Click “Install Now” for immediate installation.
Note: If the installation tool cannot match the printer driver for the identified model, you will need to manually download the printer driver and proceed with the installation using the “Add Printer” option. -
The tool will create a TCP/IP port for adding printers, download the necessary printer driver, and proceed with automatic installation.
-
Once the printer addition process is complete, perform a test print. Successful printing of the test page confirms the completion of the printer setup.
Congratulations! You’ve successfully added the printer using the Quick Print Tool! Simply select the newly added printer when printing.
Warranty Statement
Our printer server comes with a one-year warranty service, effective from the
date of product purchase. During the warranty period, if your product
experiences any malfunctions due to manufacturing defects or material issues,
we will provide free repair or replacement services. The warranty covers, but
is not limited to, hardware failures, component damages, and manufacturing
defects. The warranty does not cover the following situations:
Damages caused by user error, improper use, or failure to follow the
instructions in the user manual. Damages caused by accidents, natural
disasters, or force majeure events. Damages caused by unauthorized repairs,
modifications, or disassembly. Damages caused by the product being used beyond
its normal operating range. Products whose warranty period has expired. If you
require warranty service or technical support, please contact our customer
service team. We will provide support as soon as possible. Email:
support@xiaozet.net.
FCC STATEMENT
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>