KOHLER K-1949-GHLA Heated BubbleMassage Air Bath Installation Guide
- June 1, 2024
- Kohler
Table of Contents
KOHLER K-1949-GHLA Heated BubbleMassage Air Bath Installation Guide
Features
- 120 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust massage intensity to 18 levels
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Integral apron
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600 W Bubble Massage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Technology
- Auto-shutoff timer on blower allows users to enjoy Heated Bubble Massage™ experience for 60 minutes before turning off
- User interface: electronic keypad control
Installation
- Left drain
Required Products/Accessories
K-7271 Brass Slotted Overflow Bath Drain
or
K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
K-1446 Remote Installation Kit
K-23726 Drain treatment
K-23732 Tub & shower cleaner
K-31797 Slotted overflow bath drain kit
K-31795 Slotted overflow above-the-floor bath drain kit
Codes/Standards
ASME A112.19.7/CSA B45.10
CSA B45.5/IAPMO Z124
ASTM E162
ASTM E662
UL 1795
CSA C22.2 No. 218.2
ADA
ICC/ANSI A117.1
IAPMO Certification
cUL Listed
UL Listed
KOHL ER® Plastic Baths and Shower Bases Lifetime Limited Warranty KOHL ER®
Hydrotherapy Components Five-Year Limited Warranty
See website for detailed warranty information.
Available Colo rs/Finishes
Color tiles intended for reference only.
Color | Code | Description |
---|---|---|
0 | White | |
96 | Biscuit | |
NY | Dune | |
95 | Ice™ Grey | |
58 | Thunder™ Grey | |
7 | Black Black™ |
Dimension
No change in measurements
if connected with drain illustrated. (K-7272)
Required Electrical Service
Two dedicated circuits required, protected with Class A Ground Fault Circuit-
Interrupter (GFCI). Outside North America, this device may be known as a
Residual Current Device (RCD).
Blower: 120 V, 15 A, 60 Hz
Heater: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Drain location: Left
Basin area, bottom: 50-3/8″ x 19-5/8″ (1280 mm x 498 mm)
Basin area, top : 57-5/16″ x 24-1/16″ (1456 mm x 611 mm)
Weight: 130 lbs (59 kg)
Minimum floor load : 47 lbs/ft² (229.5 kg/m²)
Water depth : 15-1/2″ (394 mm)
Water capacity: 66 gal (249.8 L)
Electrical component rating: Blower : 120 V, 10 A, 60 Hz
Heater: 120 V, 5 A, 60 Hz
Minimum flat for door : 2-5/8″ (66 mm)
Notes
Measure your actual product for rough-in details.
Install this product according to the installation instructions.
The hot water supply should be 70% of the capacity of the bath or greater.
Installations will vary.
Remote blower installation kit is available for relocating the blower. Provide
access for servicing the blower.
Do not relocate or alter the PVC tee or coiled flexible tubing connected to
the blower. Follow the blower relocation instructions exactly.
ADA compliant when installed to the specific requirements of these
regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 2-26-2024 21:18 – US.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>