VOLLRATH R39774 Cafeteria Breath Guard Installation Guide

VOLLRATH R39774 Cafeteria Breath Guard Installation Guide

manylebau

• Product: Cafeteria Breath Guard
• Models: One Piece and Three Piece
• Manufacturer: Vollrath Company, L.L.C.

Cyfarwyddiadau Defnydd Cynnyrch

One Piece Breath Guard Installation

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1. Repeat for all four uprights.

2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.

3. Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.

4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.

Three Piece Breath Guard Installation

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2. Repeat for all four uprights.
2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
4. Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

Cwestiynau Cyffredin

• Q: What should I do if I encounter difficulties while tightening the cap nuts?

  •   * A: If you encounter difficulties while tightening the cap nuts, ensure you are not overtightening them to prevent cracking of the plastic components. Take caution and adjust your tightening technique if needed.

• Q: Can I install the breath guard on my own without professional help?

  •   * A: Yes, you can install the breath guard following the provided instructions. However, if you are unsure or encounter any issues, it is recommended to seek professional assistance to ensure proper installation.

These instructions cover the installation of the one pice Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.

One Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NODYN:

Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
   

2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.

3. Install the one piece breath guard (E) securing it with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.

4. Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.

Three Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NODYN:

Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
   

2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.

3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.

4. Install the side shield (G) to the support tube (D) securing with cap nuts (C) asshown. Repeat on the other side.

5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.

6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

Cwmni Vollrath, LLC

• * 1236 North Street 18th

  • Sheboygan, WI 53081-3201
  • UDA
  • Prif Ffôn: 800.628.0830
  • Service Tel: 800.628.0832
  • FFACS: 800.752.5620
  • Vollrath of Canada, Co.
  • Ffôn: 800.695.8560
  • FFACS: 800.752.5620
  • www.vollrathco.com

© 2010 The Vollrath Company, LLC

Read More About This Manual & Download PDF:

References

• Commercial Foodservice & Kitchen Equipment | Vollrath Foodservice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>