REACHER N188 LED Digital Alarm Clock User Manual

: June 1, 2024
: Reacher

Table of Contents

REACHER N188 LED Digital Alarm Clock
Features
Getting Started
Setting The Alarm
CARE & MAINTENANCE
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

REACHER N188 LED Digital Alarm Clock

Thank you for purchasing from Reacher. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and keep them in a safe place for future reference.

Features

4° LED display
10 Minutes Snooze
0-100 brightness level
30-85 db volume level
12-Hour Display

$REACHER-N188-LED-Digital-Alarm-Clock-fig- $1$$

$REACHER-N188-LED-Digital-Alarm-Clock-fig- $2$$

Getting Started

Plugging the adaptor into a standard household outlet| to make the clockwork.
Insert 2 new “AAA” batteries (not included) to keep the ALARM and TIME settings if the power is interrupted. There will be no display under battery power only and the ALARM will not sound at the correct time.

Setting The Time

Short press the “TIME SET” button to enter the time setting, and press the “+” or “-” button to set the hour;
Press the “TIME SET” button to confirm and enter the minute setting, press the “+ or “-” button to set the minute;
Note: Long press “+ or “-” button to quickly adjust.
Press the “TIME SET” button to confirm and exit the time setting.
ATTENTION: If the digit is flashing about 11s without any operation, the setting mode will exit automatically.

12-Hour Display

PM indicator will light in the afternoon.

(Note: No AM indicator)

Setting The Alarm

Short press the “ALARM SET button to enter the alarm time setting, and press “+” or - button to set the hour;

Press the “ALARM SET button to confirm and enter the minute setting, and press “+” or “-* button to adjust the minute;
Press the “ALARM SET” button to confirm and exit the alarm setting.

Using The Alarm/Snooze

Press the “AL. ON/OFF” button to switch the ON/OFF alarm. The ALARM indicator dot will be lit when it is ON.
When the preset time is reached the alarm will sound for 2 minutes unless one of the following three actions is taken:

Double press the “AL. ON/OFF” button to turn off the alarm permanently.
Press the “TIME SET”, +, “AL. ON/OFF/-” or “ALARM SET buttons which will cause the alarm to stop, but the alarm will remain set for the same time the following day.
Pressing the “SNOOZE” button will cause the alarm to stop and the alarm will sound again in 10 minutes.

Using The Alarm Volume

Rolling the VOLUME wheel to adjust volume within a range of 30db-85db.

Using The Dimmer

Rolling the DIMMER wheel to control the brightness of the LED display.

CARE & MAINTENANCE

Keep Dry: To keep the computer parts from breaking, don’t let water or too much wetness touch the clock.
Gentle Clean: Wipe the clock’s face with a clean, dry cloth. Do not use strong chemicals or rough objects.
Avoid Extreme Temperatures: To keep the clock from getting too hot, don’t put it in full sunlight or close to a heat source.
Placement You should make sure the clock is on a steady, flat surface so it doesn’t fall or get damaged by mistake.
Do a regular check of the power line and plug to see if they are worn out or broken. If you need to, replace.
Battery Care: If the clock has a battery backup, you should change the batteries every 6 to 12 months to make sure it works when the power goes out.
Regularly Dust: Make sure to dust the clock often so that dust doesn’t build up and damage the buttons and display.
Secure Cords: To avoid damage and tripping dangers, keep the power line tight and untangled.
Stay away from wet places: Don’t put the clock in places with a lot of moisture, like bathrooms.
Be Careful: To keep the inside from getting damaged, don’t drop or bump the clock.
Button Care: Be careful not to damage the controls by pressing the buttons too hard.
Screen Protection: To keep the LED screen from getting scratched, don’t touch it with anything sharp.
Reset Often: Make sure the clock works correctly and quickly by resetting it every so often.
Unplug During Storms: To keep the clock safe from power spikes, unplug it during storms.
Proper air: To keep things from getting too hot, make sure there is enough air around the clock.
Safety for Children: Keep the clock out of reach of little kids to keep them safe and avoid damage.
Firmware changes: If you can, check for any firmware changes that might make things work better.
Avoid Overloading: To avoid power problems, don’t plug too many things into one outlet at once.

Care of Your Clock

Replace the backup battery annually, or store the clock without a battery when not in use.
A soft cloth or a paper towel may be used to clean your clock.
Do not use any corrosive cleaner or chemical solutions on the clock.
Keep the clock clean and dry to avoid any problems.

Support

If you experience any problems with this clock then contact customer@reachershop.com where we will deal with your issue within 24 hours.

FREQUENTLY ASKED QUESTIONS

What brand manufactures the REACHER N188 LED Digital Alarm Clock?

The REACHER N188 LED Digital Alarm Clock is manufactured by REACHER.

What type of display does the REACHER N188 LED Digital Alarm Clock have?

The REACHER N188 LED Digital Alarm Clock features a digital display.

What special features does the REACHER N188 LED Digital Alarm Clock offer?

The REACHER N188 LED Digital Alarm Clock offers brightness dimmer, adjustable alarm volume, memory time and alarm settings, and is corded for power.

What are the dimensions of the REACHER N188 LED Digital Alarm Clock?

The dimensions of the REACHER N188 LED Digital Alarm Clock are 5.6 inches in width and 2.9 inches in height.

What is the power source for the REACHER N188 LED Digital Alarm Clock?

The REACHER N188 LED Digital Alarm Clock is powered by corded electric.

What room type is the REACHER N188 LED Digital Alarm Clock suitable for?

The REACHER N188 LED Digital Alarm Clock is suitable for use in the bedroom.

What material is the REACHER N188 LED Digital Alarm Clock made of?

The REACHER N188 LED Digital Alarm Clock is made of Acrylonitrile Butadiene Styrene (ABS).

What is the frame material of the REACHER N188 LED Digital Alarm Clock?

The frame material of the REACHER N188 LED Digital Alarm Clock is also Acrylonitrile Butadiene Styrene (ABS).

What is the mounting type of the REACHER N188 LED Digital Alarm Clock?

The REACHER N188 LED Digital Alarm Clock is tabletop mounted.

What type of watch movement does the REACHER N188 LED Digital Alarm Clock have?

The REACHER N188 LED Digital Alarm Clock has an automatic watch movement.

What is the operation mode of the REACHER N188 LED Digital Alarm Clock?

The operation mode of the REACHER N188 LED Digital Alarm Clock is electrical.

How much does the REACHER N188 LED Digital Alarm Clock weigh?

The REACHER N188 LED Digital Alarm Clock weighs 9.6 ounces.

What is the item model number of the REACHER N188 LED Digital Alarm Clock?

The item model number of the REACHER N188 LED Digital Alarm Clock is N188.

What is the price of the REACHER N188 LED Digital Alarm Clock?

The price of the REACHER N188 LED Digital Alarm Clock is $13.99.

What should I do if my REACHER N188 LED Digital Alarm Clock is not displaying the time correctly?

Firstly, ensure that the power cord is properly plugged into a functioning outlet. If the issue persists, try resetting the clock by unplugging it for a few minutes and then plugging it back in.

How can I fix it if the alarm on my REACHER N188 LED Digital Alarm Clock is not sounding at the set time?

Check if the alarm volume is adjusted to an audible level and that the alarm is correctly set. Try resetting the alarm settings and testing it again.

What steps should I take if the brightness adjustment feature of my REACHER N188 LED Digital Alarm Clock is not working?

Ensure that the brightness dimmer function is activated and adjust the settings accordingly. If the problem persists, try resetting the clock to its default settings.

Why is my REACHER N188 LED Digital Alarm Clock not responding to button presses?

Clean the buttons and surrounding areas to remove any dirt or debris that may be interfering with their function. Try resetting the clock by unplugging it for a few minutes and then plugging it back in.