Shenzhen Dixib Technology Co LTD T208-F Magnetic Wireless Car Charger User Manual

Table of Contents

Shenzhen Dixib Technology Co LTD T208-F Magnetic Wireless Car Charger

Scan the QR code to watch the quick installation video and get started easily.

1 x Magnetic Wireless Car Charger; 1 x Air Vent Mount; 1 x User Manual;

Input	5V⎓3A, 9V⎓2.2A
Output	15W/10W/7.5W/5W

Connect Ball head mount with wireless charger: First, twist counterclockwise to remove the adjustment screw from the rear of the wireless charger. Then, place the adjustment screw on the baB head and push ball head into recei\1ing screw. Finally, twist adjustment screw clockwise to secure. Connection.
Attach to Vehicle Air Vent: Twist wing nut counterclockwise to open the air vent clamp. Then, insert clamp into the vehicle air vent leaf and twist clockwise to secure. Finally, loosen or tighten adjustment screw to adjust wireless charger angle according to your preference.
Charge or Remove Your Phone: Our automatic magnetic alignment allows you to easily attach and remove your phone.

a. Please make sure your smartphone is Qi-enabled or has Qi-Compatible cover.
b. To achieve fast wireless charging, a Quick Charge 3.0 power adapter is required.

a. For your safety, please do not disassemble the Charger.
b. To avoid damaging the internal circuitry, please do not use or store the magnetic wireless charger in a hot or humid environment.
c. A mognet may Interfere with the magnetic charging of the product or cause malfunctions; To avoid interference between other devices and products, please keep magnetic chip cards (such as ID cards, credit cards) or medical devices (such as pacemakers, defibrillators, hearing aids, etc.) away from the product. Keep a distance of at least 20 cm from the product, and more than 30 cm during wireless charging.