AnkerWork A3320M Wireless Microphone User Manual

: June 1, 2024
: AnkerWork

Table of Contents

AnkerWork A3320M Wireless Microphone
Important Safety Instructions
Declaration of Conformity
FCC Statement
Specifications
Product Usage Instructions
FAQ (Frequently Asked Questions)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AnkerWork A3320M Wireless Microphone

Important Safety Instructions

Store in a cool and dry place.
The operating temperature should be between 0°C to 40°C.
Do not clean the product with harmful chemicals or detergents.
To reduce the risk of injury, close supervision is necessary when this product is used near children, or keep the device out of the reach of children.
Do not install this equipment near any heat sources or in a confined space, such as a bookcase or similar unit, and ensure it remains in a well-ventilated area.
Do not listen at a high volume for an extended period using monitor earphones. Otherwise, you may experience possible hearing damage.
Do not allow the product to come into contact with any kind of liquid. If the inside battery comes into contact with water, chemical decomposition may occur, potentially causing fire or explosion.

The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs), and other implants. Always maintain a distance of at least 3.94″/10 cm between the product component containing the magnet and the cardiac pacemaker, implanted defibrillator, or another implant.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Notice
This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and 2015/863/EU. For the declaration of conformity, visit the Web site https://uk.anker.com/.

This product is designed and manufactured with high-quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. This symbol indicates a “separate collection” for all batteries and accumulators. The a danger of explosion if the battery is incorrectly replaced. To reduce the risk of fire, explosion, or leakage of flammable liquid/gas, don’t disassemble, crush, puncture, short external contacts, expose to temperatures above 60°C (140°F), sunshine, or exposure to extremely low air pressure or dispose of in fire or water. Replace only with specified batteries. High or low extreme temperatures that a battery can be subjected to during storage or transportation:
- Storage: -20℃ – 45℃ (-4°F – 113°F)
- Transportation: 5℃ – 35℃ (41°F – 95°F)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body with a minimum separation distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This product complies with FCC RF Exposure requirements and refers to the FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AOKBA3320S, 2AOKB-A3320M The following importer is the responsible party.

Company Name: Fantasia Trading LLC
Address : 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973

Notice to Canadian Users
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Specifications

Transmitter maximum output power : 9.38 dBm
Receiver maximum output power : 9.84 dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)

This product is designed and manufactured with high-quality materials and components that can be recycled and reused. It complies with the radio interference requirements of the European Community. The product generates strong permanent magnetic fields that could interfere with cardiac pacemakers, implanted defibrillators (ICDs), and other implants. Always maintain a distance of at least 3.94 inches (10 cm) between the product component containing the magnet and the cardiac pacemaker, implanted defibrillator, or other implant to avoid any interference. Proper disposal and recycling are essential for protecting natural resources, human health, and the environment. Please deliver the product to an appropriate collection facility for recycling instead of discarding it as household waste.

Product Usage Instructions

Safety Precautions:
Before using the product, ensure that it is placed away from cardiac pacemakers, implanted defibrillators, or other implants to prevent any interference due to magnetic fields.

Battery Replacement:
Only replace the battery with the correct type to avoid the risk of explosion. Dispose of used batteries according to the provided instructions.

Recycling:
Follow proper disposal and recycling procedures as detailed in the instructions to protect the environment and conserve natural resources.

FAQ (Frequently Asked Questions)

Q: Can this product be used near cardiac pacemakers or implanted defibrillators?
A: It is recommended to maintain a distance of at least 3.94 inches (10 cm) between the product component containing the magnet and any cardiac pacemakers, implanted defibrillators, or other implants to avoid interference.

Q: What should I do with the used batteries from the product?
A: Dispose of used batteries according to the instructions provided to prevent any risk of explosion and follow proper recycling guidelines.