WEELMOTO 2005-2011 Toyota Tacoma Headlights Instruction Manual

Table of Contents

Product Specifications:

Before Installation:

Professional installation is recommended.
Do not touch the bulb with bare hands. Oil can affect the lifespan of the bulb. If you accidentally touch the bulb, please clean it with rubbing alcohol and a soft cloth before installation.

Installation Steps:

Remove the two 10mm bolts and two clips to detach the grill from the vehicle.
Locate and remove one plastic clip on each headlight to release the trim piece.
Prepare to remove the bumper:
- Remove the three plastic clips on top of the bumper.
Gently pull back the bumper to access a ten-millimeter bolt that needs to be removed.
Locate and remove a 10mm bolt inside the fender liner.
Pull the fender liner out to reveal the bolt holding the headlight in place.
Remove this bolt to free the headlight.
Remove the two 10mm screws on top of the headlamp assembly.
Twist and remove the bulbs from the back of the headlight.
Lift the tab on the headlight assembly and carefully tilt it forward to detach the headlight.
Take the WEELMOTO headlight and insert the bulbs.
Align the new headlight assembly in place and secure it with the bolts.
Transfer any clips or attachments from the old headlight to the new one. Reinstall the bolts, trim pieces and bolts. Put the grill back.

Need Help?
Don’t hesitate to contact us using one of the methods below:

Frequently Asked Questions (FAQ):

Q: Is this headlight assembly compatible with other car models?
A: The WEELMOTOTM Headlight Assembly is specifically designed for 2005-2011 TOYOTA Tacoma models. It is not recommended for use with other car models.
Q: Can I install this headlight assembly myself?
A: While DIY installation is possible, professional installation is recommended to ensure proper fit and functionality of the headlight assembly.

Professional installation is recommended.
Do not touch the bulb with bare hands. Oil can affect the lifespan of the bulb. If you accidentally touch the bulb, please clean it with rubbing alcohol and a soft cloth before installation.

Step 1
Remove the two 10mm bolts and two clips to detach the grill from the vehicle.
Step 2
Locate and remove one plastic clip on each headlight to release the trim piece.
Step 3
Prepare to remove the bumper:
- Remove the three plastic clips on top of the bumper.
Step 4
Gently pull back the bumper to access a ten-millimeter bolt that needs to be removed.
Step 5
- Locate and remove a 10mm bolt inside the fender liner.
- Pull the fender liner out to reveal the bolt holding the headlight in place (this bolt is located on the side of the plastic L-shaped bracket).
- Remove this bolt to free the headlight.
Step 6
Remove the two 10mm screws on top of the headlamp assembly.
- Twist and remove the bulbs from the back of the headlight.
- Lift the tab on the headlight assembly and carefully tilt it forward to detach the headlight.
Step 7
- Take the WEELMOTO headlight and insert the bulbs.
- Align the new headlight assembly in place and secure it with the bolts.
- Transfer any clips or attachments from the old headlight to the new one. Reinstall the bolts, trim pieces and bolts. Put the grill back.