WEELMOTO T10 LED Parking Light Bulb Instruction Manual
- June 1, 2024
- WEELMOTO
Table of Contents
WEELMOTO T10 LED Parking Light Bulb
Specifications
- Product Name: LED Parking Light Bulb T10
- Power: 4W
- Designed to replace original parking light halogen bulb
- Positive and negative terminals
Product Usage Instructions
Installation Steps
Preparation
- Ensure the vehicle is turned off and headlights are switched\ off.
- Locate the parking light bulb socket.
Removing Old Bulb
- Gently twist the bulb socket counterclockwise to release it from the housing.
- Carefully remove the old bulb from the socket and set it aside.
Inserting LED Bulb
- Take the LED bulb and insert it into the socket, aligning the pins with the slots.
- Firmly push the bulb into the socket until it is securely seated.
- Ensure the bulb is properly aligned and positioned straight.
Verification
- Before reassembling, turn on the vehicle’s parking lights to verify the new LED bulb is functioning correctly.
- Check for proper illumination and ensure there are no flickering or error messages.
FAQ
- Q: What should I do if the parking light does not illuminate after installation?
- A: Kindly remove the LED bulb, rotate it 180 degrees, and reinsert it into the socket. Ensure proper alignment and connection.
- Q: Can I touch the LED bulb directly with my fingers during installation?
- A: It is recommended to avoid touching the LED bulb directly with your fingers as it may affect its performance and lifespan. Please use gloves or a clean cloth during installation.
Important Information
LED Parking Light Bulb T10 (Power: 4W)
Important Note:
- The LED T10 bulb is designed to replace the original parking light halogen bulb.
- The bulb has positive and negative terminals. If the parking light does not illuminate, kindly remove the bulb, rotate it 180 degrees, and reinsert it into the socket.
- Avoid touching the LED bulb directly with your fingers as it may affect its performance and lifespan. Use gloves or a clean cloth during installation.
Installation Steps
- Ensure the vehicle is turned off and the headlights are switched off.
- Locate the parking light bulb socket.
- Gently twist the bulb socket counterclockwise to release it from the housing.
- Carefully remove the old bulb from the socket and set it aside.
- Take the LED bulb and insert it into the socket, aligning the pins with the slots.
- Firmly push the bulb into the socket until it is securely seated.
- Ensure the bulb is properly aligned and positioned straight.
- Before reassembling, turn on the vehicle’s parking lights to verify the new LED bulb is functioning correctly.
- Check for proper illumination and ensure there are no flickering or error messages.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>