QISHENG B08CK74TFG Exposed Shower System Installation Guide

QISHENG B08CK74TFG Exposed Shower System

Shower Type

Installation Steps

Flush piping system prior and after installation of fitting thoroughly.

Specification

Application

Operation with unpressurized storage heaters is not possible. Use for indoor public places and common residence.

Specifications

If static pressure exceeds O.SMPa, a pressure-reducing valve must be fitted.
Avoid major pressure differences between hot and cold water supply.

Function
Check connections for leaks and check function of fitting.
Maintenance
Inspect and clean all components and replace if necessary. Shut off water supply for maintenance work.
Note
When installing the cartridge, ensure that the seals are correctly seated. Tighten the screws evenly and alternately.

Maintenance

CAUTION: Always turn water OFF before removing existing or disassembling the faucet. Open faucet handle to relieve water pressure and insure that complete water shut-off has been accomplished.

To keep the surface clean and bright, please clean the faucet regularly, please abide by the following procedures.

1. Use rinsing water and soft cloth, clean bilge and bilge membrane on the surface to the best of the abilities.

2. Cleaned the residua with the following cleansers only.
   Soft liquid cleanser.
   Colorless glass cleanser, totally soluble powder cleanser without abrasive capability. (Mixed by instructions)
   Never use cleanser, emery cloth or handkerchief which can rub.
   Never use cleanser containing abrasive cleansers, ammonia, bleach, acids, waxes, alcohol, solvents or other products not recommended for chrome.
   Never use silicone gel containing acetic acid.

3. After cleaning, rinse to flush cleanser off and dry with soft cloth.

4. Carefully dismantle the aerator regularly, rinse under clean water until loose debris is cleared.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>