RockShine R1 Open Ear Air Conduction Headphones User Manual
- June 10, 2024
- RockShine
Table of Contents
RockShine R1 Open Ear Air Conduction Headphones
Product Information
The product is a device designed to perform a specific function.
It is built with high-quality materials and has undergone rigorous testing to
ensure reliability and safety. The device is lightweight and easy to use,
making it ideal for both personal and professional use.
Product Usage Instructions
- Before using the device, ensure that it is fully charged or plugged in.
- Read the user manual carefully and follow all instructions and safety precautions.
- Power on the device using the designated button or switch.
- Follow the prompts on the device’s interface to perform the desired function.
- When finished, power off the device and disconnect from any power source.
- Clean the device as directed in the user manual and store it in a safe place.
It is important to note that improper use or handling of the device may result in damage, injury, or even death. Always follow the manufacturer’s instructions and guidelines, and seek assistance if needed.
How to Wear
What’s In the Box
Power On/Off
- Power On: long press the MFB for 3 sec, LED flashes.
- Power Off: long press the MFB for 3 sec, LED flashes. Also power off automatically 3 min after disconnecting the BT connection.
Restore Factory Setting
Press & hold the MFB for 10 sec under Power Off mode.
BT Connection
Select “RockShine R1” in the BT menu to connect, successful connection prompt tons
Answer/Hang up/Reject a Call
- Answer/Hang up: Click the MFB once.
- Reject: Double-click the MFB.
Play/Pause Music
Click the MFB once.
Voice Assistant
Quickly triple-click MFB
Previous/Next
- Previous Track: Press & hold the Button-.
- Next Track: Press & hold the Button+.
Volume Up/Down
- Volume Up: click the Button+once.
- Volume decrease: click the Button-once.
Charge
Please use DC 5V adapter to charge. The green light will be on after flashes once during charging and the white LED will be on if fully charged.
Low Battery
When battery is lower than 5%, the green LED flashes 3 times every 4 mins with
the volume alarm tone.
Attentions
- Listening to music at a high volume for a long time may cause discomfort. It is strongly recommended to use medium volume. Avoid using it at a volume higher than 80% for long time.
- Using headphones will affect your perception of the surrounding environment. Pay more attention when using headphones.
- Do not open or modify the headphone,as this may cause damage or burn out.
- Do not throw, sit on or twist headphones.
- Do not put it in fire or charge with a voltage higher than 5V.
- Contains small parts, not suitable for children under 10 years old.
- Do not classify it as household waste. Please send it to local electrical equipment recycling station to discard.
Note: The company does not assume any responsibility for the loss of personal property caused by the violation of the above warnings.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>