anko 43089062 Outdoor Light with Tripod User Manual
- June 12, 2024
- Anko
Table of Contents
anko 43089062 Outdoor Light with Tripod
Product Information
The Outdoor Light with Tripod is a versatile lighting solution for outdoor activities. It comes with a tripod stand, multiple power options, and adjustable brightness settings. The light panel has a size of 17 * 12 cm and can emit up to 1000 lumens of light. The tripod stand can reach a maximum height of 270cm and has a minimum separation between its base feet of 94cm. The angle of inclination of the light panel can be adjusted from 0 to 45 degrees.
The product can be powered in three ways: via USB, car charger, or alligator clip. It has an input of DC 12V and 5V. The packing contents include a tripod stand, car lighter socket, USB to cigarette lighter adapter, alligator clip, wire controller, remote control (requires 2 x AAA batteries, not included), light panel, 4M power cord wire, and carry bag.
Safety instructions
Please read all safety instruction warnings carefully before using this product. Improper use of this product may result in damage to this or attached products.
To ensure the product works well, please never use in the following conditions:
- Near heaters or in high temperatures.
- In direct sunshine.
- Do not use chemical solvents to clean this product.
Specification
- 3 ways to power: USB, Car charger, Alligator clip
- Input: DC 12V and 5V
- Light panel size: 17 * 12 cm
- Lumens: 1000
- Maximum height of tripod stand in normal use: 270cm.
- The separation between tripod stand base feet in normal use: Minimum 94cm.
- The angle of inclination of light panel：0-45 degree
Packing contents
Product Usage Instructions
- Cigarette Lighter Operating: Install the light panel into the stand. Connect the light panel with the 4M power cord wire, then connect the power cord with the wire controller. After the preparation process, connect the wire controller with the cigarette lighter. Insert the cigarette lighter into the car lighter socket rated DC 12V.
- USB Operating: Follow the cigarette lighter operating process. Connect the cigarette lighter with the provided car lighter socket. Then, connect the USB connector with a USB port rated DC 5V.
- Alligator Clip: Follow the preparation process. Connect the wire controller with the alligator clip. Link the clips with an accumulator, ensuring that the red clip is connected to the positive pole and the black clip to the negative pole.
- Use the wire controller or remote control to power on and adjust the brightness of the light. The wire controller can be used to turn the light on/off, and increase/decrease brightness in 11 levels (short press for discrete adjustments and long press for continuous adjustments). The remote control (2 x AAA batteries not included) has similar functions.
Operating Instructions (3 ways power source)
Preparation : Install the light panel ○7 into the stand ○1. Connect the
light panel ○7 with 4M power cord wire⑧， then connect the power cord with wire
controller ○5.
- Cigarette lighter operating: after the above preparation process, connect the cigarette○2 with the wire controller○5, insert the cigarette lighter into the car lighter socket rated DC 12V.
- USB operating: after the cigarette lighter operating process, connect cigarette lighter○2 with provided car lighter socket○3, then connect the USB connector with a USB port rated DC 5V.
- Alligator clip: after the preparation process, connect the wire controller ○5 with the alligator clip○4, then link the clips with the accumulator. Red clip for positive pole, black clip for negative pole.
- Use the wired controller or remote control to power on and change the brightness.
- Wire controller：
- Press to turn on/off the light.
- Short press to increase the brightness， total 11 brightness, long press for step-less adjustment.
- Short press to lower the brightness， total 11 brightness, long press for step-less adjustment.
- Remote Control – 2 x AAA batteries（not included）
- Press to turn on/off the light.
- Short press to increase the brightness， total 11 brightness.
- Short press to lower the brightness， total 11 brightness.
Maintenance
- Replace Batteries in Remote Control: Open the door of the remote control, replace the batteries with 2 x AAA batteries, and close the door of the remote control.
- Cleaning: Before cleaning, unplug the product from the power source.
- Replace batteries in remote control. Open the door of remote control. Replace batteries with 2 x AAA batteries. Close the door of the remote control.
- Before cleaning, unplug from input source.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>